EN 1:1998 -
The StandardsDirect Glossary of European / EN Standards
THE EN STANDARDS GLOSSARY
en standards, European standards
Glossary of BC, ISO, and EN Standards

EN 1:1998 Onwards

Standard No Title of Standard
EN 1:1998 Flued oil stoves with vaporizing burners
EN 10001:1991 Definition and classification of pig-irons
EN 100012:1996 Harmonized system of quality assessment for electronic components. Basic specification. X-ray inspection of electronic components
EN 100014:1992 Harmonized system of quality assessment for electronic components. Basic specification: CECC assessed process average procedure (60% confidence limit)
EN 100015-2:1994 Basic specification. Protection of electrostatic sensitive devices. Requirements for low humidity conditions
EN 100015-3:1994 Basic specification. Protection of electrostatic sensitive devices. Requirements for clean room areas
EN 100015-4:1994 Basic specification. Protection of electrostatic sensitive devices. Requirements for high voltage environments
EN 10002-1:2001 Tensile testing of metallic materials. Method of test at ambient temperature
EN 10002-5:1992 Tensile testing of metallic materials. Method of test at elevated temperatures
EN 100114-1:1994 Rule of Procedure 14. Quality assessment procedures. Approval of manufacturers and other organizations
EN 100114-1:1997 Rule of Procedure 14. Quality assessment procedures. CECC requirements for the approval of an organization
EN 100114-6:1997 CECC Quality assessment procedure for electronic components. Technology approval of electronic component manufacturers
EN 10016-1:1995 Non-alloy steel rods for drawing and/or cold rolling. General requirements
EN 10016-2:1995 Non-alloy steel rods for drawing and/or cold rolling. Specific requirements for general purpose rod
EN 10016-3:1995 Non-alloy steel rods for drawing and/or cold rolling. Specific requirements for rimmed and rimmed substitute low carbon steel rod
EN 10016-4:1995 Non-alloy steel rods for drawing and/or cold rolling. Specific requirements for rod for special applications
EN 10017:2004 Steel rod for drawing and/or cold rolling. Dimensions and tolerances
EN 10020:2000 Definition and classification of grades of steel
EN 10021:1993 General technical delivery requirements for steel and iron products
EN 10024:1995 Hot rolled taper flange I sections. Tolerances on shape and dimensions
EN 10025-1:2004 Hot rolled products of non-alloy structural steels. General delivery conditions
EN 10025-2:2004 Hot rolled products of non-alloy structural steels. Technical delivery conditions for flat products
EN 10025-3:2004 Hot rolled products of non-alloy structural steels. Technical delivery conditions for long products
EN 10025-4:2004 Hot-rolled products of structural steels. Technical delivery conditons for the thermomechanical rolled weldable fine grain steels
EN 10025-5:2004 Hot rolled products of structual steels. Technical delivery conditons for structural steels with improved atmospheric corrosion resistance
EN 10025-6:2004 Hot rolled products of structural steels. Technical delivery conditons for plates and wide flats of high yield strength structural steels in the quenched and tempered condition
EN 10027-1:1992 Designation systems for steel. Steel names, principal symbols
EN 10027-2:1992 Designation systems for steels. Steel numbers
EN 10028-1:2000 Specification for flat products made of steels for pressure purposes. General requirements
EN 10028-2:2003 Specification for flat products made of steels for pressure purposes. Non-alloy and alloy steels with specified elevated temperature properties
EN 10028-3:2003 Specification for flat products made of steels for pressure purposes. Weldable fine grain steels, normalized
EN 10028-4:2003 Specification for flat products made of steels for pressure purposes. Nickel alloy steels with specified low temperature properties
EN 10028-5:2003 Specification for flat products made of steels for pressure purposes. Weldable fine grain steels, thermomechanically rolled
EN 10028-6:2003 Specification for flat products made of steels for pressure purposes. Weldable fine grain steels, quenched and tempered
EN 10028-7:2000 Flat products made of steels for pressure purposes. Stainless steels
EN 10029:1991 Specification for tolerances on dimensions, shape and mass for hot rolled steel plates 3 mm thick or above
EN 10031:2003 Semi finished products for forging. Tolerances on dimensions shape and mass
EN 10034:1993 Structural steel I and H sections. Tolerances on shape and dimensions
EN 10036:1991 Chemical analysis of ferrous materials. Determination of total carbon in steels and irons. Gravimetric method after combustion in a stream of oxygen
EN 1004:2004 Mobile access and working towers made of prefabricated elements. Materials, dimensions, design loads, safety and performance requirements
EN 10045-1:1990 Charpy impact test on metallic materials. Test method (V- and U-notches)
EN 10045-2:1993 Charpy impact test on metallic materials. Method for the verification of impact testing machines
EN 10048:1997 Hot rolled narrow steel strip. Tolerances on dimensions and shape
EN 10051:1992 Specification for continuously hot-rolled uncoated plate, sheet and strip of non-alloy and alloy steels. Tolerances on dimensions and shape
EN 1005-1:2001 Safety of machinery. Human physical performance. Terms and definitions
EN 10052:1994 Vocabulary of heat treatment terms for ferrous products
EN 1005-2:2003 Safety of machinery. Human physical performance. Manual handling of machinery and component parts of machinery
EN 1005-3:2002 Safety of machinery. Human physical performance. Recommended force limits for machinery operation
EN 10055:1996 Hot rolled steel equal flange tees with radiused root and toes. Dimensions and tolerances on shape and dimensions
EN 10056-1:1999 Specification for structural steel equal and unequal angles. Dimensions
EN 10056-2:1993 Specification for structural steel equal and unequal angles. Tolerances on shape and dimensions
EN 10058:2003 Hot rolled flat steel bars for general purposes. Dimensions and tolerances on shape and dimensions
EN 10059:2003 Hot rolled square steel bars for general purposes. Dimensions and tolerances on shape and dimensions
EN 10060:2003 Hot rolled round steel bars for general purposes. Dimensions and tolerances on shape and dimensions
EN 10061:2003 Hot rolled hexagon steel bars for general purposes. Dimensions and tolerances on shape and dimensions
EN 10067:1997 Hot rolled bulb flats. Dimensions and tolerances on shape, dimensions and mass
EN 10071:1991 Chemical analysis of ferrous materials. Determination of manganese in steels and irons. Electrometric titration method
EN 1007-1:2002 Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements. Determination of size content
EN 1007-2:2002 Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements. Determination of linear density
EN 1007-3:2002 Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements. Determination of filament diameter and cross-section area
EN 1007-5:2003 Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements. Determination of distribution of tensile strength and of tensile strain to failure of filament
EN 10079:1993 Definition of steel products
EN 1008:2002 Mixing water for concrete. Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry.
EN 10083-1:1991 Quenched and tempered steels. Technical delivery conditions for special steels
EN 10083-2:1991 Quenched and tempered steels. Technical delivery conditions for unalloyed quality steels
EN 10083-3:1996 Quenched and tempered steels. Technical delivery conditions for boron steels
EN 10084:1998 Case hardening steels. Technical delivery conditions
EN 10085:2001 Nitriding steel. Technical delivery conditions
EN 10087:1999 Free cutting steels. Technical delivery conditions for semi-finished products, hot rolled bars and rods
EN 10088-1:2005 Stainless steels. List of stainless steels
EN 10088-2:2005 Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
EN 10088-3:2005 Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
EN 10089:2002 Hot rolled steels for quenched and tempered springs. Technical delivery conditions
EN 10090:1998 Valve steels and alloys for internal combustion engines
EN 10092-1:2003 Hot rolled spring steel flat bars. Flat bars. Dimensions and tolerances on shape and dimensions
EN 10092-2:2003 Hot rolled spring steel flat bars. Ribbed and grooved spring leaves. Dimensions and tolerances on shape and dimensions
EN 10095:1999 Heat resisting steels and nickel alloys
EN 1010-1:2004 Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Common requirements
EN 1010-3:2002 Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Cutting machines
EN 1010-4:2004 Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Bookbinding, paper converting and finishing machines
EN 10106:1996 Cold rolled non-oriented electrical steel sheet and strip delivered in the fully processed state
EN 10107:1996 Grain-oriented electrical steel sheet and strip delivered in the fully processed state
EN 10108:2004 Round steel rod for cold heading and cold extrusion. Dimensions and tolerances
EN 10111:1998 Continuously hot-rolled low carbon steel sheet and strip for cold forming. Technical delivery conditions
EN 1011-1:1998 Welding. Recommendations for welding of metallic materials. General guidance for arc welding
EN 1011-2:2001 Welding. Recommendations for welding of metallic materials. Arc welding of ferritic steels
EN 1011-3:2000 Welding. Recommendations for welding of metallic materials. Arc welding of stainless steels
EN 1011-4:2000 Welding. Recommendations for welding of metallic materials. Arc welding of aluminium and aluminium alloys
EN 1011-5:2003 Welding. Recommendations for welding of metallic materials. Welding of clad steel
EN 1011-7:2004 Welding. Recommendations for welding of metallic materials. Electron beam welding
EN 1011-8:2004 Welding. Recommendations for welding of metallic materials. Welding of cast irons
EN 10120:1997 Steel sheet and strip for welded gas cylinders
EN 1012-1:1997 Compressors and vacuum pumps. Safety requirements. Compressors
EN 1012-2:1997 Compressors and vacuum pumps. Safety requirements. Vacuum pumps
EN 10126:1996 Cold rolled electrical non-alloyed steel sheet and strip delivered in the semi-processed state
EN 10130:1999 Cold-rolled low-carbon steel flat products for cold forming. Technical delivery conditions
EN 10131:1991 Cold-rolled uncoated low carbon and high yield strength steel flat products for cold forming. Tolerances on dimensions and shape
EN 1013-1:1998 Light transmitting profiled plastic sheeting for single skin roofing. General requirements and test methods
EN 1013-2:1999 Light transmitting profiled plastic sheeting for single skin roofing. Specific requirements and test methods for sheets of glass fibre reinforced polyester resin (GRP)
EN 10132-1:2000 Cold rolled narrow steel strip for heat treatment. Technical delivery conditions. General
EN 10132-2:2000 Cold rolled narrow steel strip for heat treatment. Technical delivery conditions. Case hardening steels
EN 10132-3:2000 Cold rolled narrow steel strip for heat treatment. Technical delivery conditions. Steels for quenching and tempering
EN 10132-4:2000 Cold rolled narrow steel strip for heat treatment. Technical delivery conditions. Spring steels and other applications
EN 1013-3:1998 Light transmitting profiled plastic sheeting for single skin roofing. Specific requirements and test methods for sheets of polyvinyl chloride (PVC)
EN 1013-4:2000 Light transmitting profiled plastic sheeting for single skin roofing. Specific requirements, test methods and performance of polycarbonate (PC) sheets
EN 1013-5:2000 Light transmitting profiled plastic sheeting for single skin roofing. Specific requirements, test methods and performance of polymethylmethacrylate (PMMA) sheets
EN 10136:1991 Chemical analysis of ferrous materials. Determination of nickel in steels and irons. Flame atomic absorption spectrometric method
EN 10139:1998 Cold rolled uncoated mild steel narrow strip for cold forming. Technical delivery conditions
EN 10140:1997 Cold rolled narrow steel strip. Tolerances on dimensions and shape
EN 1014-1:1995 Wood preservatives. Creosote and creosoted timber. Methods of sampling and analysis. Procedure for sampling creosote
EN 1014-2:1996 Wood preservatives. Creosote and creosoted timber. Methods of sampling and analysis. Procedure for obtaining a sample of creosote from creosoted timber for subsequent analysis
EN 10143:1993 Continuously hot-dip metal coated steel sheet and strip. Tolerances on dimensions and shape
EN 1014-3:1998 Wood preservatives. Creosote and creosoted timber. Methods of sampling and analysis. Determination of the benzo[$ia]pyrene content of creosote
EN 1014-4:1996 Wood preservatives. Creosote and creosoted timber. Methods of sampling and analysis. Determination of the water extractable phenols content of creosote
EN 10149-1:1996 Specification for hot-rolled flat products made of high yield strength steels for cold forming. General delivery conditions





To receive a price quote for any EN standard, please review our partners on the right


Return To The EN Standards Glossary Index






HOW TO OBTAIN STANDARDS 
To receive a direct quote for any EN standard, please review our partners below.

OTHER INFORMATION





Copyright StandardsDirect. European Standards.