EN 12325-2:1999 -
The StandardsDirect Glossary of European / EN Standards
THE EN STANDARDS GLOSSARY
en standards, European standards
Glossary of BC, ISO, and EN Standards

EN 12325-2:1999 Onwards

Standard No Title of Standard
EN 12325-2:1999 Irrigation techniques. Centre pivot and moving lateral systems. Minimum performances and technical characteristics
EN 12325-3:1999 Irrigation techniques. Centre pivot and moving lateral systems. Terminology and classification
EN 12326-1:2004 Slate and stone products for discontinuous roofing and cladding. Product specification
EN 12326-2:2000 Slate and stone products for discontinuous roofing and cladding. Methods of test
EN 12327:2000 Gas supply systems. Pressure testing, commissioning and decommissioning procedures. Functional requirements
EN 12329:2000 Corrosion protection of metals. Electrodeposited coatings of zinc with supplementary treatment on iron or steel
EN 1233:1997 Water quality. Determination of chromium. Atomic absorption spectrometric methods
EN 12330:2000 Corrosion protection of metals. Electrodeposited coatings of cadmium on iron or steel
EN 123300:1992 Specification for harmonized system of quality assessment for electronic components. Sectional specification. Multilayer printed boards
EN 12332-1:1999 Rubber- or plastics-coated fabrics. Determination of bursting strength. Steel ball method
EN 12332-2:2002 Rubber- or plastics-coated fabrics. Determination of bursting strength. Hydraulic method
EN 12334:2001 Industrial valves. Cast iron check valves
EN 12337-1:2000 Glass in building. Chemically strengthened soda lime silicate glass. Definition and description
EN 12337-2:2004 Glass in building. Chemically strengthed soda lime silicate glass. Evaluation of conformity/Product standard
EN 12338:1998 Water quality. Determination of mercury. Enrichment methods by amalgamation
EN 12339:1997 Inland navigation vessels. Rope tubs
EN 123400:1992 Harmonized system of quality assessment for electronic components. Sectional specification: flexible printed boards without through connections
EN 123400-800:1992 Harmonized system of quality assessment for electronic components. Capability detail specification: flexible printed boards without through-connections
EN 12341:1999 Air quality. Determination of the PM10 fraction of suspended particulate matter. Reference method and field test procedure to demonstrate reference equivalence of measurement methods
EN 12342:1998 Breathing tubes intended for use with anaesthetic apparatus and ventilators
EN 12346:1999 Gymnastic equipment. Wall bars, lattice ladders and climbing frames. Safety requirements and test methods
EN 12347:1998 Biotechnology. Performance criteria for steam sterilizers and autoclaves
EN 12348:2000 Core drilling machines on a stand. Safety
EN 1235:1995 Solid fertilizers. Test sieving
EN 123500:1992 Specification for harmonized system of quality assessment for electronic components. Sectional specification: flexible printed boards with through connections
EN 123500-800:1992 Harmonized system of quality assessment for electronic components. Capability detail specification: flexible printed boards with through-connections
EN 12350-1:2000 Testing fresh concrete. Sampling
EN 12350-2:2000 Testing fresh concrete. Slump test
EN 12350-3:2000 Testing fresh concrete. Vebe test
EN 12350-4:2000 Testing fresh concrete. Degree of compactability
EN 12350-5:2000 Testing fresh concrete. Flow table test
EN 12350-6:2000 Testing fresh concrete. Density
EN 12350-7:2000 Testing fresh concrete. Air content. Pressure methods
EN 12351:1999 Industrial valves. Protective caps for valves with flanged connections
EN 12352:2000 Traffic control equipment. Warning and safety light devices
EN 12353:2000 Chemical disinfectants and antiseptics. Preservation of microbial strains used for the determination of bactericidal and fungicidal activity
EN 12354-1:2000 Building acoustics. Estimation of acoustic performance in buildings from the performance of elements. Airborne sound insulation between rooms
EN 12354-2:2000 Building acoustics. Estimation of acoustic performance in buildings from the performance of elements. Impact sound insulation between rooms
EN 12354-3:2000 Building acoustics. Estimation of acoustic performance in buildings from the performance of elements. Airborne sound insultation against outdoor sound
EN 12354-4:2000 Building acoustics. Estimation of acoustic performance in buildings from the performance of elements. Transmission of indoor sound to the outside
EN 12354-6:2003 Building acoustics. Estimation of acoustic performance of buildings from the performance of elements. Sound absorption in enclosed spaces
EN 12355:2003 Food processing machinery. Derinding-, skinning- and membrane removal machines. Safety and hygiene requirements
EN 1236:1995 Fertilizers. Determination of bulk density (loose)
EN 123600:1997 Harmonized system of quality assessment for electronic components. Sectional specification. Flex-rigid multilayer printed boards with through connections
EN 12365-1:2003 Building hardware. Gasket and weatherstripping for doors, windows, shutters and curtain walling. Performance requirements and classification
EN 12365-2:2003 Building hardware. Gasket and weatherstripping for doors, windows, shutters and curtain walling. Linear compression force test methods
EN 12365-3:2003 Building hardware. Gasket and weatherstripping for doors, windows, shutters and curtain walling. Deflection recovery test method
EN 12365-4:2003 Building hardware. Gasket and weatherstripping for doors, windows, shutters and curtain walling. Recovery after accelerated ageing test method
EN 12368:2000 Traffic control equipment. Signal heads
EN 12369-1:2001 Wood-based panels. Characteristic values for structural design. OSB, particleboards and fireboards
EN 12369-2:2004 Wood-based panels. Characteristic values for structural design. Plywood
EN 1237:1995 Fertilizers. Determination of bulk density (tapped)
EN 12370:1999 Natural stone test methods. Determination of resistance to salt crystallization
EN 123700:1997 Harmonized system of quality assessment for electronic components. Sectional specification. Flex-rigid double sided printed boards with through connections
EN 12371:2001 Natural stone test methods. Determination of frost resistance
EN 12372:1999 Natural stone test methods. Determination of flexural strength under concentrated load
EN 12373-1:2001 Aluminium and aluminium alloys. Anodizing. Method for specifying decorative and protective anodic oxidation coatings on aluminium
EN 12373-10:1999 Aluminium and aluminium alloys. Anodizing. Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus
EN 12373-11:2001 Aluminium and aluminium alloys. Anodizing. Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20$0D, 45$0D, 60$0D, and 85$0D
EN 12373-12:2001 Aluminium and aluminium alloys. Anodizing. Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
EN 12373-13:2001 Aluminium and aluminium alloys. Anodizing. Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer
EN 12373-14:2001 Aluminium and aluminium alloys. Anodizing. Visual determination of image clarity of anodic oxidation coatings. Chart scale method
EN 12373-15:2001 Aluminium and aluminium alloys. Anodizing. Assessment of resistance of anodic oxidation coatings to cracking by deformation
EN 12373-16:2001 Aluminium and aluminium alloys. Anodizing. Check for continuity of thin anodic oxidation coatings. Copper sulfate test
EN 12373-17:2001 Aluminium and aluminium alloys. Anodizing. Determination of electric breakdown potential
EN 12373-18:2001 Aluminium and aluminium alloys. Anodizing. Rating system for the evaluation of pitting corrosion. Chart method
EN 12373-19:2001 Aluminium and aluminium alloys. Anodizing. Rating system for the evaluation of pitting corrosion. Grid method
EN 12373-2:1999 Aluminium and aluminium alloys. Anodizing. Determination of mass per unit area (surface density) of anodic oxidation coatings. Gravimetric method
EN 12373-3:1999 Aluminium and aluminium alloys. Anodizing. Determination of thickness of anodic oxidation coatings. Non-destructive measurement by split-beam microscope
EN 12373-4:1999 Aluminium and aluminium alloys. Anodizing. Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dye spot test with prior acid treatment
EN 12373-5:1999 Aluminium and aluminium alloys. Anodizing. Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
EN 12373-6:1999 Aluminium and aluminium alloys. Anodizing. Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass
EN 12373-7:1999 Aluminium and aluminium alloys. Anodizing. Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion
EN 12373-8:1999 Aluminium and aluminium alloys. Anodizing. Determination of the comparative fastness to ultra-violet light and heat of coloured anodic oxidation coatings
EN 12373-9:1999 Aluminium and aluminium alloys. Anodizing. Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus
EN 12374:1998 Packaging. Flexible tubes. Terminology
EN 12375:1998 Packaging. Flexible aluminium tubes. Wall thickness determination method
EN 12376:1999 In vitro diagnostic medical devices. Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology
EN 12377:1999 Packaging. Flexible tubes. Test method for the airtightness of closures
EN 1238:1999 Adhesives. Determination of the softening point of thermoplastic adhesives (ring and ball)
EN 12380:2002 Air admittance valves for drainage systems. Requirements, test methods and evaluation of conformity
EN 123800:1997 Harmonized system of quality assessment for electronic components. Sectional specification. Flexible multilayer printed boards with through connections
EN 12381:2005 Health informatics. Time standards for healthcare specific problems
EN 12384:1999 Copper and copper alloys. Determination of spring bending limit on strip
EN 12385-1:2002 Steel wire ropes. Safety. General requirements
EN 12385-10:2003 Steel wire ropes. Safety. Spiral ropes for general applications
EN 12385-2:2002 Steel wire ropes. Safety. Definitions, designation and classification
EN 12385-3:2004 Steel wire ropes. Safety. Information for use and maintenance
EN 12385-4:2002 Steel wire ropes. Safety. Stranded ropes for general lifting applications
EN 12385-5:2002 Steel wire ropes. Safety. Stranded ropes for lifts
EN 12385-6:2004 Steel wire ropes. Safety. Stranded ropes for mine shafts
EN 12385-7:2002 Steel wire ropes. Safety. Locked coil ropes for mine shafts
EN 12385-8:2002 Steel wire ropes. Safety. Stranded hauling and carrying-hauling ropes for cableway installations designed to carry persons
EN 12385-9:2002 Steel wire ropes. Safety. Locked coil carrying ropes for cableway installations designed to carry persons
EN 12386:1999 Chemicals used for treatment of water intended for human consumption. Copper sulfate
EN 12387:2005 Footwear, leather and imitation leather goods manufacturing machines. Modular shoe repair equipment. Safety requirements
EN 1239:1998 Adhesives. Freeze-thaw stability
EN 12390-1:2000 Testing hardened concrete. Shape, dimensions and other requirements for specimens and moulds
EN 12390-2:2000 Testing hardened concrete. Making and curing specimens for strength tests
EN 12390-3:2002 Testing hardened concrete. Compressive strength of test specimens
EN 12390-4:2000 Testing hardened concrete. Compressive strength. Specification for testing machines
EN 12390-5:2000 Testing hardened concrete. Flexural strength of test specimens
EN 12390-6:2000 Testing hardened concrete. Tensile splitting strength of test specimens
EN 12390-7:2000 Testing hardened concrete. Density of hardened concrete
EN 12390-8:2000 Testing hardened concrete. Depth of penetration of water under pressure
EN 12391-1:2003 Chimneys. Execution standard for metal chimneys. Chimneys for non-roomsealed heating appliances
EN 12392:2000 Aluminium and aluminium alloys. Wrought products. Special requirements for products intended for the production of pressure equipment
EN 12393-1:1999 Non-fatty foods. Multiresidue methods for the gas chromatographic determination of pesticide residues. General considerations
EN 12393-2:1999 Non-fatty foods. Multiresidue methods for the gas chromatographic determination of pesticide residues. Methods for extraction and clean-up
EN 12393-3:1999 Non-fatty foods. Multiresidue methods for the gas chromatographic determination of pesticide residues. Determination and confirmatory tests
EN 12396-1:1999 Non-fatty foods. Determination of dithiocarbamate and thiuram disulfide residues. Spectrometric method
EN 12396-2:1999 Non-fatty foods. Determination of dithiocarbamate and thiuram disulfide residues. Gas chromatographic method
EN 12396-3:2000 Non-fatty foods. Determination of dithiocarbamate and thiuram disulfide residues. UV spectrometric xanthogenate method
EN 12397:2004 Safety requirements for Cableway installations designed to carry persons. Operation
EN 124:1994 Gully tops and manhole tops for vehicular and pedestrian areas. Design requirements, type testing, marking, quality control





To receive a price quote for any EN standard, please review our partners on the right


Return To The EN Standards Glossary Index






HOW TO OBTAIN STANDARDS 
To receive a direct quote for any EN standard, please review our partners below.

OTHER INFORMATION





Copyright StandardsDirect. European Standards.