EN 1240:1998 -
The StandardsDirect Glossary of European / EN Standards
THE EN STANDARDS GLOSSARY
en standards, European standards
Glossary of BC, ISO, and EN Standards

EN 1240:1998 Onwards

Standard No Title of Standard
EN 1240:1998 Adhesives. Determination of hydroxyl value and/or hydroxyl content
EN 12400:2002 Windows and pedestrian doors. Mechanical durability. Requirements and classification
EN 12402:1999 Lead and lead alloys. Methods of sampling for analysis
EN 12405-1:2005 Gas meters. Conversion devices. Volume conversion
EN 12406:1999 Swap bodies. Thermal swap bodies of class C. Dimensions and general requirements
EN 12407:2000 Natural stone test methods. Petrographic examination
EN 12408:2004 Safety requirements for cableways installations designed to carry person. Quality control
EN 12409:1999 Rubber and plastics machines. Thermoforming machines. Safety requirements
EN 1241:1998 Adhesives. Determination of acid value
EN 12410:1999 Swap bodies. Thermal swap bodies of class A. Dimensions and general requirements
EN 12412-2:2003 Thermal performance of windows, doors and shutters. Determination of thermal transmittance by hot box method. Frames
EN 12412-4:2003 Thermal performance of windows, doors and shutters. Determination of thermal transmittance by hot box method. Roller shutter boxes
EN 12413:1999 Safety requirements for bonded abrasive products
EN 12414:1999 Vehicle parking control equipment. Pay and display ticket machine. Technical and functional requirements
EN 12415:2001 Safety of machine tools. Small numerically controlled turning machines and turning centres
EN 12416-1:2001 Fixed firefighting systems. Powder systems. Requiremments and test methods for components
EN 12416-2:2001 Fixed firefighting systems. Powder systems. Design, construction and maintenance
EN 12417:2001 Machine tools. Safety. Machining centres
EN 12418:2000 Masonry and stone cutting-off machines for job site. Safety
EN 1242:1998 Adhesives. Determination of isocyanate content
EN 12420:1999 Copper and copper alloys. Forgings
EN 12421:1998 Magnesium and magnesium alloys. Unalloyed magnesium
EN 12422:1999 Sisal twines
EN 12423:1999 Polypropylene twines
EN 12424:2000 Industrial, commercial and garage doors and gates. Resistance to wind load. Classification
EN 12425:2000 Industrial, commercial and garage doors and gates. Resistance to water penetration. Classification
EN 12426:2000 Industrial, commercial and garage doors and gates. Air permeability. Classification
EN 12427:2000 Industrial, commercial and garage doors and gates. Air permeability. Test method
EN 12428:2000 Industrial, commercial and garage doors and gates. Thermal transmittance. Requirements for the calculation
EN 12429:1998 Thermal insulating products for building applications. Conditioning to moisture equilibrium under specified temperature and humidity conditions
EN 1243:1999 Adhesives. Determination of free formaldehyde in amino and amidoformaldehyde condensates
EN 12430:1998 Thermal insulating products for building applications. Determination of behaviour under point load
EN 12431:1998 Thermal insulating products for building applications. Determination of thickness for floating floor insulating products
EN 12432:1998 Gymnastic equipment. Balancing beams. Functional and safety requirements, test methods
EN 12433-1:2000 Industrial, commercial, and garage doors and gates. Terminology. Types of doors
EN 12433-2:2000 Industrial, commercial, and garage doors and gates. Terminology. Parts of doors
EN 12434:2000 Cryogenic vessels. Cryogenic flexible hoses
EN 12436:2002 Adhesives for load-bearing timber structures. Casein adhesives. Classification and performance requirements
EN 12438:1998 Magnesium and magnesium alloys. Magnesium alloys for cast anodes
EN 12439:1999 Sterile rectal catheters for single use
EN 1244:1998 Adhesives. Determination of the colour and/or colour changes of adhesive coats under the influence of light
EN 12440:2001 Natural stone. Denomination criteria
EN 12441-1:2002 Zinc and zinc alloys. Chemical analysis. Determination of aluminium in zinc alloys. Titrimetric method
EN 12441-10:2004 Zinc and zinc alloys. Chemical analysis. Determination of chromium and titanium in zinc alloys. Spectrophotometric method
EN 12441-2:2002 Zinc and zinc alloys. Chemical analysis. Determination of magnesium in zinc alloys. Flame atomic absorption spectrometric method
EN 12441-3:2002 Zinc and zinc alloys. Chemical analysis. Determination of lead, cadmium and copper. Flame atomic absorption spectometric method
EN 12441-4:2003 Zinc and zinc alloys. Chemical analysis. Determination of iron in zinc alloys. Spectrophotometric method
EN 12441-5:2003 Zinc and zinc alloys. Chemical analysis. Determination of iron in primary zinc. Spectrophotometric method
EN 12441-6:2003 Zinc and zinc alloys. Chemical analysis. Determination of aluminium and iron. Flame atomic absorption spectrometric method
EN 12441-7:2004 Zinc and zinc alloys. Chemical analysis. Determination of tin. Flame atomic absorption spectrometric method after extraction
EN 12441-8:2004 Zinc and zinc alloys. Chemical analysis. Detection of tin in secondary zinc. Flame atomic absorption spectrometric method
EN 12441-9:2004 Zinc and zinc alloys. Chemical analysis. Determination of nickel in zinc alloys. Flame atomic absorption spectrometric method
EN 12442-1:2000 Animal tissues and their derivatives utilized in the manufacture of medical devices. Analysis and management of risk
EN 12442-2:2000 Animal tissues and their derivatives utilized in the manufacture of medical devices. Controls on sourcing, collection and handling
EN 12442-3:2000 Animal tissues and their derivatives utilized in the manufacture of medical devices. Validation of the elimination and/or inactivation of viruses and transmissible agents
EN 12444:2001 Industrial, commercial and garage doors and gates. Resistance to wind load. Testing and calculation
EN 12445:2001 Industrial, commercial and garage doors and gates. Safety in use of power operated doors. Test methods
EN 12446:2003 Chimneys. Components. Concrete outer wall elements
EN 12447:2001 Geotextiles and geotextile-related products. Screening test method for determining the resistance to hydrolysis in water
EN 12449:1999 Copper and copper alloys. Seamless, round tubes for general purposes
EN 1245:1999 Adhesives. Determination of pH. Test method
EN 12450:1999 Copper and copper alloys. Seamless, round copper capillary tubes
EN 12451:1999 Copper and copper alloys. Seamless, round tubes for heat exchangers
EN 12452:1999 Copper and copper alloys. Rolled, finned, seamless tubes for heat exchangers
EN 12453:2001 Industrial, commercial and garage doors and gates. Safety in use of power operated doors. Requirements
EN 12454:1998 Founding. Visual examination of surface discontinuities. Steel sand castings
EN 12455:1999 Resilient floor coverings. Specification for corkment underlay
EN 12457-1:2002 Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges.
EN 12457-2:2002 Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges.
EN 12457-3:2002 Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges.
EN 12457-4:2002 Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges.
EN 12458:1999 Surface active agents. Determination of stability in hard water
EN 1246:1998 Adhesives. Determination of ash and sulfated ash
EN 12460:1998 Biotechnology. Large-scale process and production. Guidance on equipment selection and installation in accordance with the biological risk
EN 12461:1998 Biotechnology. Large-scale process and production. Guidance for the handling, inactivating and testing of waste
EN 12462:1998 Biotechnology. Performance criteria for pumps
EN 12463:2004 Food processing machinery. Filling machines and auxiliary machines. Safety and hygiene requirements
EN 12464-1:2002 Light and lighting. Lighting of work places. Indoor work places
EN 12465:2001 Wood poles for overhead lines. Durability requirements
EN 12466:1998 Resilient floor coverings. Vocabulary
EN 12467:2004 Fibre-cement flat sheets. Product specification and test methods
EN 12468:1998 Biotechnology. Modified organisms for application in the environment. Guidance for the monitoring strategies for deliberate releases of genetically modified plants
EN 12469:2000 Biotechnology. Performance criteria for microbiological safety cabinets
EN 1247:2004 Foundry machinery. Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi-continuous casting machines
EN 12470-1:2000 Clinical thermometers. Metallic liquid-in-glass thermometers with maximum device
EN 12470-2:2001 Clinical thermometers. Phase change type (dot matrix) thermometers
EN 12470-3:2000 Clinical thermometers. Performance of compact electrical thermometers (non-predictive and predictive) with maximum device
EN 12470-4:2001 Clinical thermometers. Performance of electrical thermometers for continuous measurement
EN 12470-5:2003 Clinical thermometers. Performance of infra-red ear thermometers (with maximum device)
EN 12472:1999 Method for the simulation of wear and corrosion for the detection of nickel release from coated items
EN 12473:2000 General principles of cathodic protection in sea water
EN 12474:2001 Cathodic protection for submarine pipelines
EN 12475-1:1998 Classification of dense shaped refractory products. Alumina-silica products
EN 12475-2:1998 Classification of dense shaped refractory products. Basic products containing less than 7% residual carbon
EN 12475-3:1998 Classification of dense shaped refractory products. Basic products containing from 7% to 30% residual carbon
EN 12475-4:1999 Classification of dense shaped refractory products. Special products
EN 12476:2000 Phosphate conversion coatings of metals. Method of specifying requirements
EN 12477:2001 Protective gloves for welders
EN 12478:2001 Safety of machine tools. Large numerically controlled turning machines and turning centres
EN 12479:2002 Wood poles for overhead lines. Sizes. Methods of measurement and permissible deviations
EN 1248:2001 Foundry machinery. Safety requirements for abrasive blasting equipment
EN 12480:2002 Gas meters. Rotary displacement gas meters
EN 12481:2001 Self adhesive tapes. Terminology
EN 12482-1:1998 Aluminium and aluminium alloys. Reroll stock for general applications. Specifications for hot rolled reroll stock
EN 12482-2:1998 Aluminium and aluminium alloys. Reroll stock for general applications. Specifications for cold rolled reroll stock
EN 12483:1999 Liquid pumps. Pump units with frequency inverters. Guarantee and compatibility tests
EN 12484-1:1999 Irrigation techniques. Automatic turf irrigation systems. Definition of the programme of equipment by the owner
EN 12484-2:2000 Irrigation techniques. Automatic turf irrigation systems. Design and definition of typical technical templates
EN 12484-3:2000 Irrigation techniques. Automatic turf irrigation systems. Automatic control and system management
EN 12484-4:2002 Irrigation techniques. Automatic turf irrigation systems. Installation and acceptance
EN 12484-5:2002 Irrigation techniques. Automatic turf irrigation systems. Testing methods of systems
EN 12485:2001 Chemicals used for treatment of water intended for human consumption. Calcium carbonate, high-calcium lime and half-burnt dolomite. Test methods
EN 12487:2000 Corrosion protection of metals. rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys
EN 12489:2000 Industrial, commercial and garage doors and gates. Resistance to water penetration. Test method
EN 12490:1999 Durability of wood and wood-based products. Preservative-treated solid wood. Determination of the penetration and retention of creosote in treated wood





To receive a price quote for any EN standard, please review our partners on the right


Return To The EN Standards Glossary Index






HOW TO OBTAIN STANDARDS 
To receive a direct quote for any EN standard, please review our partners below.

OTHER INFORMATION





Copyright StandardsDirect. European Standards.