EN 12563:1999 -
The StandardsDirect Glossary of European / EN Standards
THE EN STANDARDS GLOSSARY
en standards, European standards
Glossary of BC, ISO, and EN Standards

EN 12563:1999 Onwards

Standard No Title of Standard
EN 12563:1999 Non-active surgical implants. Joint replacement implants. Specific requirements for hip joint replacement implants
EN 12564:1999 Non-active surgical implants. Joint replacement implants. Specific requirements for knee joint replacement implants
EN 12566-1:2000 Small wastewater treatment systems for up to 50 PT. Prefabricated septic tanks
EN 12567:2000 Industrial valves. Isolating valves for LNG. Specification for suitability and appropriate verification tests
EN 12568:1998 Foot and leg protectors. Requirements and test methods for toecaps and metal penetration resistant inserts
EN 12569:1999 Industrial valves. Valves for chemical and petrochemical process industry. Requirements and tests
EN 12570:2000 Industrial valves. Method for sizing the operating element
EN 12571:1999 Materials and articles in contact with foodstuffs. Transport units for catering containers containing prepared foodstuffs. Thermal and hygienic requirements and testing
EN 12572:1999 Artificial climbing structures. Protection points, stability requirements and test methods
EN 12573-1:2000 Welded static non-pressurized thermoplastic tanks. General principles
EN 12573-2:2000 Welded static non-pressurized thermoplastic tanks. Calculation of vertical cylindrical tanks
EN 12573-3:2000 Welded static non-pressurized thermoplastic tanks. Design and calculation for single skin rectangular tanks
EN 12573-4:2000 Welded static non-pressurized thermoplastic tanks. Design and calculation of flanged joints
EN 12574-1:2002 Stationary waste containers. Containers with a capacity from 1700 l to 5000 l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting devices. Dimensions and design
EN 12574-2:2002 Stationary waste containers. Performance requirements and test methods
EN 12574-3:2002 Stationary waste containers. Safety and health requirements
EN 12575:1998 Plastics. Thermoset moulding compounds. Determination of the degree of fibre wet out in SMC
EN 12576:1998 Plastics. Fibre reinforced composites. Preparation of compression moulded test plates of SMC, BMC and DMC
EN 12579:2000 Soil improvers and growing media. Sampling
EN 12580:2000 Soil improvers and growing media. Determination of a quantity
EN 12582:1999 Surface active agents. Determination of the polyethylene glycol content according to molar mass in non-ionic surface active agents (ethoxylated) by HPLC/ELSD
EN 12583:2000 Gas supply systems. Compressor stations. Functional requirements
EN 12584:1999 Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts. Terminology
EN 12585:1999 Glass plant, pipeline and fittings. Pipeline and fittings DN 15 to 1000. Compatibility and interchangeability
EN 12586:1999 Child care articles. Soother holder. Safety requirements and test methods
EN 12588:1999 Lead and lead alloys. Rolled lead sheet for building purposes
EN 12589:2001 Ventilation for buildings. Air terminal units. Aerodynamic testing and rating of constant and variable rate terminal units
EN 12590:2000 Textiles. Industrial sewing threads made wholly or partly form synthetic fibres
EN 12591:2000 Bitumen and bituminous binders. Specifications for paving grade bitumens
EN 12592:2000 Methods of test for petroleum and its products. BS 2000-47. Bitumen and bituminous binders. Determination of solubility
EN 12593:2000 Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of the Fraass breaking point
EN 12594:2000 Methods of test for petroleum and its products. Bitumen and bituminous binders. Preparation of test samples
EN 12595:2000 Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of kinematic viscosity
EN 12596:2000 Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of dynamic viscosity by vacuum capillary
EN 12597:2000 Bitumen and bituminous binders. Terminology
EN 12599:2000 Ventilation for buildings. Tests procedures and measuring methods for handing over installed ventilation and air conditioning systems
EN 126:2004 Multifunctional controls for gas burning appliances
EN 12600:2002 Glass in building. Pendulum test. Impact test method and classification for flat glass
EN 12601:2001 Reciprocating internal combustion engine driven generating sets. Safety
EN 12603:2002 Glass in building. Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data
EN 12604:2000 Industrial, commercial and garage doors and gates. Mechanical aspects. Requirements
EN 12605:2000 Industrial, commercial and garage doors and gates. Mechanical aspects. Test methods
EN 12606-1:2000 Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of the paraffin wax content. Method by distillation
EN 12606-2:2000 Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of the paraffin wax content. Method by extraction
EN 12607-1:2000 Methods of test for petroleum and its products. Bitumen and bitumenous binders. Determination of the resistance to hardening under the influence of heat and air. RTFOT method
EN 12607-2:2000 Methods of test for petroleum and its products. Bitumen and bitumenous binders. Determination of the resistance to hardening under the influence of heat and air. TFOT Method
EN 12607-3:2000 Methods of test for petroleum and its products. Bitumen and bitumenous binders. Determination of the resistance to hardening under the influence of heat and air. RFT Method
EN 12608:2003 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors. Classification, requirements and test methods
EN 1261:1995 Fibre ropes for general service. Hemp
EN 12613:2001 Plastic warning devices for underground cables and pipelines with visual characteristics
EN 12614:2004 Products and systems for the protection and repair of concrete structures. Test methods. Determination of glass transition temperatures of polymers
EN 12615:1999 Products and systems for the protection and repair of concrete structures. Test methods. Determination of slant shear strength
EN 12616:2003 Surfaces for sports areas. Determination of water infiltration rate
EN 12617-1:2003 Products and systems for the protection and repair of concrete structures. Test methods. Determination of linear shrinkage for polymers and surface protection systems (SPS)
EN 12617-3:2002 Products and systems for the protection and repair of concrete structures. Test methods. Determination of early age linear shrinkage for structural bonding agents
EN 12617-4:2002 Products and systems for the protection and repair of concrete structures. Test methods. Determination of shrinkage and expansion
EN 12618-1:2003 Products and systems for the protection and repair of concrete structures. Test methods. Adhesion and elongation capacity of injection products with limited ductility
EN 12618-3:2004 Products and systems for the protection and repair of concrete structures. Test methods. Determination of the adhesion of injection products, with or without thermal cycling.
EN 12619:1999 Stationary source emissions. Determination of the mass concentration of total gaseous organic carbon at low concentrations in flue gases. Continuous flame ionization detector method
EN 1262:2003 Surface active agents. Determination of pH value of solutions or dispersions
EN 12620:2002 Aggregates for concrete
EN 12622:2001 Safety of machine tools. Hydraulic press brakes
EN 12625-3:1999 Tissue paper and tissue products. Determination of thickness, bulking thickness and apparent bulk density
EN 12625-4:1999 Tissue paper and tissue products. Determination of tensile strength, stretch at break and tensile energy absorption
EN 12625-5:1999 Tissue paper and tissue products. Determination of wet tensile strength
EN 12625-7:2000 Tissue paper and tissue products. Determination of optical properties
EN 12627:1999 Industrial valves. Butt welding ends for steel valves
EN 12628:1999 Diving accessories. Combined buoyancy and rescue devices. Functional and safety requirements, test methods
EN 12629-1:2001 Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Common requirements
EN 12629-2:2002 Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Block making machines
EN 12629-3:2002 Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Slide and turntable machines
EN 12629-4:2001 Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Concrete and tile making machines
EN 12629-5.4:2003 Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Concrete pipe coating machines
EN 12629-5-1:2003 Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Pipe making machines manufacturing in the vertical axis
EN 12629-5-2:2003 Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Pipe making machines manufacturing in the horizontal axis
EN 12629-5-3:2003 Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Pipe prestressing machines
EN 12629-7:2004 Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Stationary and mobile equipment for long line manufacture of prestressed products
EN 12629-8:2002 Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety.
EN 12630:1999 Fruit and vegetable juices. Determination of glucose, fructose, sorbitol and sucrose contents. Method using high-performance liquid chromatography
EN 12631:1999 Fruit and vegetable juices. Enzymatic determination of D- and L-lactic acid (lactate) content. NAD spectrometric method
EN 1263-1:2002 Safety nets. Safety requirements, test methods
EN 12632:1999 Fruit and vegetable juices. Enzymatic determination of acetic acid (acetate) content. NAD spectrometric method
EN 1263-2:2002 Safety nets. Safety requirements for the positioning limits
EN 12634:1998 Petroleum products and lubricants. Determination of acid number. Non-aqueous potentiometric titration method
EN 12635:2002 Industrial, commercial and garage doors and gates. Installation and use
EN 12636:1999 Products and systems for the protection and repair of concrete structures. Test methods. Determination of adhesion concrete to concrete
EN 12637-1:2004 Products and systems for the protection and repair of concrete structures. Test methods. Compatibility of injection products. Compatibility with concrete
EN 12637-3:2003 Products and systems for the protection and repair of concrete structures. Test methods. Compatibility of injection products. Effect of injection products on elastomers
EN 12639:2000 Liquid pumps and pump units. Noise test code. Grade 2 and grade 3 of accuracy
EN 12640:2001 Securing of cargo on road vehicles. Lashing points on commercial vehicles for goods transportation. Minimum requirements and testing
EN 1264-1:1998 Floor heating. Systems and components. Definitions and symbols
EN 12641-1:2000 Swap bodies. Tarpaulins. Minimum requirements
EN 1264-2:1998 Floor heating. Systems and components. Determination of the thermal output
EN 12642:2001 Securing of cargo on road vehicles. Body structure of commercial vehicles. Minimum requirements
EN 12643:1998 Earth-moving machinery. Rubber-tyred machines. Steering requirements
EN 1264-3:1998 Floor heating. Systems and components. Floor heating. Systems and components. Dimensioning
EN 1264-4:2001 Floor heating. Systems and components. Installation
EN 12644-1:2001 Cranes. Information for use and testing. Instructions
EN 12644-2:2000 Cranes. Information for use and testing. Marking
EN 12645:1999 Pressure gauges. Apparatus for inspection of pressure and/or inflation of tyres for motor vehicles. Metrology, requirements and testing
EN 1265:1999 Noise test code for foundry machines and equipment
EN 12653:2000 Footwear, leather and imitation leather manufacturing machines. Nailing machines. Safety requirements
EN 12654-1:1999 Textile glass. Yarns. Designation
EN 12654-2:1999 Textile glass. Yarns. Methods of test and general specifications
EN 12654-3:1999 Textile glass. Yarns. General requirements for general applications
EN 12655:1998 Gymnastic equipment. Hanging rings. Functional and safety requirements, test methods
EN 12659:1999 Lead and lead alloys. Lead
EN 1266:2002 Independent gas-fired convection heaters incorporating a fan to assist transportation of combustion air and/or flue gases
EN 12662:1998 Methods of test for petroleum and its products. Liquid petroleum products. Determination of contamination in middle distillates
EN 12663:2000 Railway applications. Structural requirements of railway vehicle bodies
EN 12664:2001 Thermal performance of building materials and products. Determination of thermal resistance by means of guarded hot plate and heat flow meter methods.
EN 12665:2002 Light and lighting. Basic terms and criteria for specifying lighting requirements
EN 12667:2001 Thermal performance of building materials and products. Determination of thermal resistance by means of guarded hot plate and heat flow meter methods.
EN 12668-1:2000 Non-destructive testing. Characterization and verification of ultrasonic examination equipment. Instruments
EN 12668-2:2001 Non-destructive testing. Characterization and verification of ultrasonic examination equipment. Probes





To receive a price quote for any EN standard, please review our partners on the right


Return To The EN Standards Glossary Index






HOW TO OBTAIN STANDARDS 
To receive a direct quote for any EN standard, please review our partners below.

OTHER INFORMATION





Copyright StandardsDirect. European Standards.