EN 10149-2:1996 -
The StandardsDirect Glossary of European / EN Standards
THE EN STANDARDS GLOSSARY
en standards, European standards
Glossary of BC, ISO, and EN Standards

EN 10149-2:1996 Onwards

Standard No Title of Standard
EN 10149-2:1996 Specification for hot-rolled flat products made of high yield strength steels for cold forming. Delivery conditions for thermomechanically rolled steels
EN 10149-3:1996 Specification for hot-rolled flat products made of high yield strength steels for cold forming. Delivery conditions for normalized or normalized rolled steels
EN 1015-1:1999 Methods of test for mortar for masonry. Determination of particle size distribution (by sieve analysis)
EN 10151:2002 Stainless steel strip for springs. Technical delivery conditions
EN 1015-10:1999 Methods of test for mortar for masonry. Determination of dry bulk density of hardened mortar
EN 1015-11:1999 Methods of test for mortar for masonry. Determination of flexural and compressive strength of hardened mortar
EN 1015-12:2000 Methods of test for mortar for masonry. Determination of adhesive strength of hardened rendering and plastering mortars on substrates
EN 1015-17:2000 Methods of test for mortar for masonry. Determination of water-soluble chloride content of fresh mortars
EN 1015-18:2002 Methods of test for mortar for masonry. Determination of water absorption coefficient due to capillary action of hardened mortar
EN 1015-19:1999 Methods of test for mortar for masonry. Determination of water vapour permeability of hardened rendering and plastering mortars
EN 1015-2:1999 Methods of test for mortar for masonry. Bulk sampling of mortars and preparation of test mortars
EN 10152:2003 Electrolytically zinc coated cold rolled steel flat products. Technical delivery conditions
EN 1015-21:2002 Methods of test for mortar for masonry. Determination of the compatibility of one-coat rendering mortars with substrates
EN 1015-3:1999 Methods of test for mortar for masonry. Determination of consistence of fresh mortar (by flow table)
EN 1015-4:1999 Methods of test for mortar for masonry. Determination of consistence of fresh mortar (by plunger penetration)
EN 1015-6:1999 Methods of test for mortar for masonry. Determination of bulk density of fresh mortar
EN 1015-7:1999 Methods of test for mortar for masonry. Determination of air content of fresh mortar
EN 1015-9:1999 Methods of test for mortar for masonry. Determination of workable life and correction time of fresh mortar
EN 10160:1999 Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
EN 10162:2003 Cold rolled steel sections. Technical delivery conditions. Dimensional and cross-sectional tolerances
EN 10163-1:2004 Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections. General requirements
EN 10163-2:2004 Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections. Plate and wide flats
EN 10163-3:2004 Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections. Sections
EN 10164:2004 Steel products with improved deformation properties perpendicular to the surface of the product. Technical delivery conditions
EN 10165:1996 Cold rolled electrical alloyed steel sheet and strip delivered in the semi-processed state
EN 10168:2004 Steel products. Inspection documents. List of information and description
EN 10169-1:2003 Continuously organic coated (coil coated) steel flat products. General information (definitions, materials, tolerances, test methods)
EN 10169-3:2003 Continuously organic coated (coil coated) steel flat products. Products for building interior applications
EN 1017:1998 Chemicals used for treatment of water intended for human consumption. Half-burnt dolomite
EN 1018:1998 Chemicals used for treatment of water intended for human consumption. Calcium carbonate
EN 10184:1992 Specification for chemical analysis of ferrous materials. Determination of phosphorus in steels and irons. Spectrophotometric method
EN 1019:1996 Chemicals used for treatment of water intended for human consumption. Sulfur dioxide
EN 1020:1998 Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, incorporating a fan to assist transportation of combustion
EN 10200:1992 Chemical analysis of ferrous materials. Determination of boron in steel. Spectrophotometric method
EN 10202:2001 Cold reduced tinmill products. Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel
EN 10204:2004 Metallic materials. Types of inspection documents
EN 10205:1992 Specification for cold reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide coated steel
EN 10207:2005 Steels for simple pressure vessels. Technical delivery requirements for plates, strips and bars
EN 10208-1:1998 Steel pipes for pipelines for combustible fluids. Technical delivery conditions. Pipes of requirement class A
EN 10208-2:1997 Steel pipes for pipelines for combustible fluids. Technical delivery conditions. Pipes of requirement class B
EN 10209:1996 Cold rolled low carbon steel flat products for vitreous enamelling. Technical delivery conditions
EN 10210-1:1994 Hot finished structural hollow sections of non-alloy and fine grain structural steels. Technical delivery requirements
EN 10210-2:1997 Hot finished structural hollow sections of non-alloy and fine grain structural steels. Tolerances, dimensions and sectional properties
EN 1021-1:1994 Furniture. Assessment of the ignitability of upholstered furniture. Ignition source: smouldering cigarette
EN 10211:1996 Chemical analysis of ferrous materials. Determination of titanium in steel and iron. Flame atomic absorption spectrometric method
EN 1021-2:1994 Furniture. Assessment of the ignitability of upholstered furniture. Ignition source: match flame equivalent
EN 10212:1996 Chemical analysis of ferrous materials. Determination of arsenic in steel and iron. Spectrophotometric method
EN 10213-1:1996 Technical delivery conditions for steel castings for pressure purposes. General
EN 10213-2:1996 Technical delivery conditions for steel castings for pressure purposes. Steel grades for use at room temperature and at elevated temperature
EN 10213-3:1996 Technical delivery conditions for steel castings for pressure purposes. Steels for use at low temperatures
EN 10213-4:1996 Technical delivery conditions for steel castings for pressure purposes. Austenitic and austenitic-ferritic steel grades
EN 10216-1:2002 Seamless steel tubes for pressure purposes. Technical delivery conditions
EN 10216-2:2002 Seamless steel tubes for pressure purposes. Technical delivery conditions. Non-alloy and alloy steel tubes with specified elevated temperature properties
EN 10216-3:2002 Seamless steel tubes for pressure purposes. Technical delivery conditions. Alloy fine grain steel tubes
EN 10216-4:2002 Seamless steel tubes for pressure purposes. Technical delivery conditions
EN 10216-5:2004 Seamless steel tubes for pressure purposes. Technical delivery conditions. Stainless steel tubes
EN 10217-1:2002 Welded steel tubes for pressure purposes. Technical delivery conditions. Non-alloy steel tubes with specified room temperature properties
EN 10217-2:2002 Welded steel tubes for pressure purposes. Technical delivery conditions. Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
EN 10217-3:2002 Welded steel tubes for pressure purposes. Technical delivery conditions. Alloy fine grain steel tubes
EN 10217-4:2002 Welded steel tubes for pressure purposes. Technical delivery conditions. Electric welded non-alloy steel tubes with specified low temperature properties
EN 10217-5:2002 Welded steel tubes for pressure purposes. Technical delivery conditions. Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
EN 10217-6:2002 Welded steel tubes for pressure purposes. Technical delivery conditions. Submerged arc welded non-alloy steel tubes with specified low temperature properties
EN 10217-7:2005 Welded steel tubes for pressure purposes. Technical delivery conditions. Stainless steel tubes
EN 10218-1:1994 Steel wire and wire products. General. Test methods
EN 10218-2:1997 Steel wire and wire products. General. Wire dimensions and tolerances
EN 10219-1:1997 Cold formed welded structural sections of non-alloy and fine grain steels. Technical delivery requirements
EN 10219-2:1997 Cold formed welded structural sections of non-alloy and fine grain steels. Tolerances, dimensions and sectional properties
EN 1022:1997 Domestic furniture. Seating. Determination of stability
EN 10220:2002 Seamless and welded steel tubes. Dimensions and masses per unit length
EN 10221:1996 Specification for surface quality classes for hot-rolled bars and rods. Technical delivery conditions
EN 10222-1:1998 Steel forgings for pressure purposes. General requirements for open die forgings
EN 10222-2:2000 Steel forgings for pressure purposes. Ferritic and martensitic steels with specified elevated temperature properties
EN 10222-3:1999 Steel forgings for pressure purposes. Nickel steels with specified low-temperature properties
EN 10222-4:1999 Steel forgings for pressure purposes. Weldable fine-grain steels with high proof strength
EN 10222-5:2000 Steel forgings for pressure purposes. Martensitic, austenitic and austenitic-ferritic stainless steels
EN 10223-1:1998 Steel wire and wire products for fences. Zinc and zinc alloy coated steel barbed wire
EN 10223-2:1998 Steel wire and wire products for fences. Hexagonal steel wire netting for agricultural, insulation and fencing purposes
EN 10223-3:1998 Steel wire and wire products for fences. Hexagonal steel wire netting for engineering purposes
EN 10223-4:1998 Steel wire and wire products for fences. Steel wire welded mesh fencing
EN 10223-5:1998 Steel wire and wire products for fences. Steel wire woven hinged joint and knotted mesh fencing
EN 10223-6:1998 Steel wire and wire products for fences. Steel wire chain link fencing
EN 10223-7:2002 Steel wire and wire products for fences. Steel wire welded panels. For fencing
EN 10224:2002 Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption. Technical delivery conditions
EN 10225:2001 Weldable structural steels for fixed offshore structures. Technical delivery conditions
EN 10226-1:2004 Pipe threads where pressure tight joins are made on the threads. Taper external threads and parallel internal threads. Dimensions, tolerances and designation
EN 10228-1:1999 Non-destructive testing of steel forgings. Magnetic particle inspection
EN 10228-2:1998 Non-destructive testing of steel forgings. Penetrant testing
EN 10228-3:1998 Non-destructive testing of steel forgings. Ultrasonic testing of ferritic or martensitic steel forgings
EN 10228-4:1999 Non-destructive testing of steel forgings. Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings
EN 10229:1998 Evaluation of resistance of steel products to hydrogen induced cracking (HIC)
EN 10230-1:2000 Steel wire nails. Loose nails for general applications
EN 1023-1:1997 Office furniture. Screens. Dimensions
EN 1023-2:2000 Office furniture. Screens. Mechanical safety requirements
EN 1023-3:2000 Office furniture. Screens. Test methods
EN 10238:1997 Automatically blast cleaned and automatically primed structural steel products
EN 1024:1997 Clay roofing tiles for discontinuous laying. Determination of geometric characteristics
EN 10240:1998 Internal and/or external protective coatings for steel tubes. Specification for hot dip galvanized coatings applied in automatic plants
EN 10241:2000 Steel threaded pipe fittings
EN 10242:1995 Threaded pipe fittings in malleable cast iron
EN 10243-1:1999 Steel die forgings. Tolerances on dimensions. Drop and vertical press forgings
EN 10243-2:1999 Steel die forgings. Tolerances on dimensions. Upset forgings made on horizontal forging machines
EN 10244-1:2001 Steel wire and wire products. Non-ferrous metallic coatings on steel wire. General principles
EN 10244-2:2001 Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Zinc or zinc alloy coatings
EN 10244-3:2001 Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Aluminium coatings
EN 10244-4:2001 Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Tin coatings
EN 10244-5:2001 Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Nickel coatings
EN 10244-6:2001 Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Copper, bronze or brass coatings
EN 10245-1:2001 Steel wire and wire products. Organic coatings on steel wire. General rules
EN 10245-2:2001 Steel wire and wire products. Organic coatings on steel wire. PVC finished wire
EN 10245-3:2001 Steel wire and wire products. Organic coatings on steel wire. PE coated wire
EN 10245-4:2003 Steel wire and wire products. Organic coatings on steel wire. Polyester coated wire
EN 10246-1:1996 Non-destructive testing of steel tubes. Automatic electromagnetic testing of seamless and welded
EN 10246-10:2000 Non-destructive testing of steel tubes. Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections
EN 10246-11:2000 Non-destructive testing of steel tubes. Liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections
EN 10246-12:2000 Non-destructive testing of steel tubes. Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections





To receive a price quote for any EN standard, please review our partners on the right


Return To The EN Standards Glossary Index






HOW TO OBTAIN STANDARDS 
To receive a direct quote for any EN standard, please review our partners below.

OTHER INFORMATION





Copyright StandardsDirect. European Standards.