EN 1335-1:2000 -
The StandardsDirect Glossary of European / EN Standards
THE EN STANDARDS GLOSSARY
en standards, European standards
Glossary of BC, ISO, and EN Standards

EN 1335-1:2000 Onwards

Standard No Title of Standard
EN 1335-1:2000 Office furniture. Office work chair. Dimensions. Determination of dimensions
EN 1335-2:2000 Office furniture. Office work chair. Safety requirements
EN 13352:2002 Specification for the performance of automatic tank contents gauges
EN 1335-3:2000 Office furniture. Office work chair. Safety test methods
EN 13353:2003 Solid wood panels (SWP). Requirements
EN 13355:2004 Coating plants. Combined booths. Safety requirements
EN 13356:2001 Visibility accessories for non-professional use. Test methods and requirements
EN 13357:2002 Methods of test for petroleum and its products. BS 2000-502. Bitumen and bituminous binders. Determination of the efflux time of petroleum cut-back and fluxed bitumens
EN 13358:2004 Methods of test for petroleum and its products. BS 2000-525. Bitumen and bituminous binders. Determination of the distillation characteristics of petroleum cut-back bitumen products
EN 13360:2002 Rubber- or plastics-coated fabrics. Terminology
EN 13361:2004 Geosynthetic barriers. Characteristics required for use as a fluid barrier in the construction of reservoirs and dams
EN 13363-1:2003 Solar protection devices combined with glazing. Calculation of solar and light transmittance. Simplified method
EN 13364:2002 Natural stone test methods. Determination of the breaking load at dowel hole
EN 13365:2002 Transportable gas cylinders. Cylinder bundles for permanent and liquefied gases (excluding acetylene). Inspection at time of filling
EN 13366:2001 Fertilizers. Treatment with a cation exchange resin for the determination of the chelated micro-nutrient content and of the chelated fraction of micro-nutrients
EN 13368-1:2001 Fertilizers. Determination of chelating agents in fertilizers by ion chromatography. EDTA, HEDTA and DTPA
EN 13368-2:2001 Fertilizers. Determination of chelating agents in fertilizers by ion chromatography. EDDHA and EDDHMA
EN 13369:2004 Common rules for precast concrete products
EN 13370:2003 Characterization of waste. Analysis of eluates. Determination of Ammonium, AOX, conductivity, Hg, phenol index, TOC, easily liberatable CN$u-, F$u-
EN 1337-1:2000 Structural bearings. General design rules
EN 13371:2002 Cryogenic vessels. Couplings for cryogenic service
EN 1337-10:2003 Structural bearings. Inspection and maintenance
EN 1337-11:1998 Structural bearings. Transport, storage and installation
EN 1337-2:2001 Structural bearings. Sliding elements
EN 13372:2004 Road transport and traffic telematics (RTTT). Dedicated short-range communication. Profiles for RTTT applications
EN 13373:2003 Natural stone test methods. Determination of geometric characteristics on units
EN 13374:2004 Temporary edge protection systems. Product specification, test methods
EN 1337-4:2004 Structural bearings. Roller bearings
EN 13375:2004 Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Specimen preparation
EN 1337-6:2004 Structural bearings. Rocker bearings
EN 1337-7:2001 Structural bearings. Spherical and cylindrical PTFE bearings
EN 13377:2002 Prefabricated timber formwork beams. Requirements, classification and assessment
EN 13378:2001 Pasta processing plants. Pasta presses. Safety and hygiene requirements
EN 1337-9:1998 Structural bearings. Protection
EN 13379:2001 Pasta processing plants. Spreader, stripping and cutting machine, stick return conveyor, stick magazine. Safety and hygiene requirements
EN 1338:2003 Concrete paving blocks. Requirements and test methods
EN 13380:2001 General requirements for components used for renovation and repair of drain and sewer systems outside buildings
EN 13382:2002 Flat pallets for materials handling. Principal dimensions
EN 13383-1:2002 Armourstone. Specification
EN 13383-2:2002 Armourstone. Test methods
EN 13384-1:2002 Chimneys. Thermal and fluid dynamic calculation methods. Chimneys serving one appliance
EN 13384-2:2003 Chimneys. Thermal and fluid dynamic calculation methods. Chimneys serving more than one heating appliance
EN 13385:2002 Transportable gas cylinders. Battery vehicles for permanent and liquefied gases (excluding acetylene). Inspection at time of filling
EN 1339:2003 Concrete paving flags. Requirements and test methods
EN 13390:2002 Food processing machinery. Pie and tart machines. Safety and hygiene requirements
EN 13391:2004 Mechanical tests for post-tensioning systems
EN 13392:2001 Textiles. Monofilaments. Determination of linear density
EN 13393:2001 Packaging. Specification for edge protectors
EN 13394:2001 Packaging. Specification for non-metallic tensional strapping
EN 13395-1:2002 Products and systems for the protection and repair of concrete structures. Test methods. Determination of workability. Test for flow of thixotropic mortars
EN 13395-2:2002 Products and systems for the protection and repair of concrete structures. Test methods. Determination of workability. Test for flow of grout or mortar
EN 13395-3:2002 Products and systems for the protection and repair of concrete structures. Test methods. Determination of workability. Test for flow of repair concrete
EN 13395-4:2002 Products and systems for the protection and repair of concrete structures. Test methods. Determination of workability. Application of repair mortar overhead
EN 13396:2004 Products and systems for the protection and repair of concrete structures. Test methods. Measurement of chloride ion ingress
EN 13397:2002 Industrial valves. Diaphragm valves made of metallic materials
EN 13398:2003 Methods of test for petroleum and its products. BS2000-516. Bitumen and bituminous binders. Determination of the elastic recovery of modified bitumen
EN 13399:2003 Methods of test for petroleum and its products. BS2000-517. Bitumen and bituminous binders. Determination of storage stability of modified bitumen
EN 134:1998 Respiratory protective devices. Nomenclature of components
EN 1340:2003 Concrete kerb units. Requirements and test methods
EN 13400:2002 Footwear. Sampling location, preparation and duration of conditioning of samples and test pieces
EN 134000:1995 Harmonized system of quality assessment for electronic components. Generic specification: variable capacitors. (Qualification approval and capability approval)
EN 13402-1:2001 Size designation of clothes. Terms, definitions and body measurement procedure
EN 13402-2:2002 Size designation of clothes. Primary and secondary dimensions
EN 13402-3:2004 Size designation of clothes. Measurements and intervals
EN 13403:2003 Ventilation for buildings. Non metallic ducts. Ductwork made from insulation ductboards
EN 13405:2002 Surface active agents. Determination of dialkyl-tetralins content in linear alkylbenzene by high performance liquid chromatography (HPLC)
EN 13406:2002 Agricultural machinery. Slurry tankers and spreading devices. Environmental protection. Requirements and test methods for the spreading precision
EN 13408:2002 Methods of test for hydraulic setting floor smoothing and/or levelling compounds. Determination of bond strength
EN 13409:2002 Methods of test for hydraulic setting floor smoothing and/or levelling compounds. Determination of setting time
EN 1341:2001 Slabs of natural stone for external paving. Requirements and test methods
EN 13410:2001 Gas-fired overhead radiant heaters. Ventilation requirements for non-domestic premises
EN 134100:1996 Harmonized system of quality assessment for electronic components. Sectional specification: variable capacitors (Qualification approval)
EN 134101:1995 Specification for harmonized system of quality assessment for electronic components. Blank detail specification: single turn disc trimmer capacitors (qualification approval)
EN 134102:1995 Specification for harmonized system of quality assessment for electronic components. Blank detail specification: multi turn concentric capacitors (qualification approval)
EN 134103:1995 Specification for harmonized system of quality assessment for electronic components. Blank detail specification: vane type air dielectric capacitors (qualification approval)
EN 134104:1995 Specification for harmonized system of quality assessment for electronic components. Blank detail specification: compression type trimmer capacitors (qualification approval)
EN 13411-1:2002 Terminations for steel wire ropes. Safety. Thimbles for steel wire rope slings
EN 13411-2:2001 Terminations for steel wire ropes. Safety. Splicing of eyes for wire rope slings
EN 13411-3:2004 Terminations for steel wire ropes. Safety. Ferrules and ferrule-securing
EN 13411-4:2002 Terminations for steel wire ropes. Safety. Metal and resin socketing
EN 13411-5:2003 Terminations for steel wire ropes. Safety. U-bolt wire rope grips
EN 13411-6:2004 Terminations for steel wire ropes. Safety. Asymmetric wedge socket
EN 13412:2002 Products and systems for the protection and repair of concrete structures. Test methods. Determination of modulus of elasticity in compression
EN 13413:2002 Resilient floor coverings. Polyvinyl chloride floor coverings on a filled fibrous backing. Specification
EN 13414-1:2003 Steel wire rope slings. Safety. Slings for general lifting service
EN 13414-2:2003 Steel wire rope slings. Safety. Specification for information for use and maintenance to be provided by the manufacturer
EN 13414-3:2003 Steel wire rope slings. Safety. Grommets and cable-laid slings
EN 13415:2002 Adhesives. Test of adhesives for floor coverings. Determination of the electrical resistance of adhesive films
EN 13416:2001 Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Rules for sampling
EN 13417-1:2001 Reinforcement. Specifications for woven fabrics. Designation
EN 13417-2:2001 Reinforcement. Specifications for woven fabrics. Methods of test and general requirements
EN 13417-3:2001 Reinforcement. Specifications for woven fabrics. Specific Requirements
EN 13418:2004 Rubber and plastics machines. Winding machines for film or sheet. Safety requirements
EN 1342:2001 Setts of natural stone for external paving. Requirements and test methods
EN 13422:2004 Vertical road signs. Portable deformable warning devices and delineators. Portable road traffic signs. Cones and cylinders
EN 13423:2000 Compressed natural gas vehicle operations
EN 13427:2004 Packaging. Requirements for the use of European Standards in the field of packaging and packaging waste
EN 13428:2004 Packaging. Requirements specific to manufacturing and composition. Prevention by source reduction
EN 13429:2004 Packaging. Reuse
EN 1343:2001 Kerbs of natural stone for external paving. Requirements and test methods
EN 13430:2004 Packaging. Requirements for packaging recoverable by material recycling
EN 13431:2004 Packaging. Requirements for packaging recoverable in the form of energy recovery, including specification of minimum inferior calorific value
EN 13432:2000 Packaging. Requirements for packaging recoverable through composting and biodegradation. Test scheme and evaluation criteria for the final acceptance of packaging
EN 13435:2002 Surface active agents. Determination of free amine content of alkyl dimethyl betaines
EN 13437:2003 Packaging and material recycling. Criteria for recycling methods. Description of recycling processes and flow chart
EN 13439:2003 Packaging. Rate of energy recovery. Definition and method of calculation
EN 1344:2002 Clay pavers. Requirements and test methods
EN 13440:2003 Packaging. Rate of recycling. Definition and method of calculation
EN 13441:2002 Biotechnology. Laboratories for research, development and analysis. Guidance on containment of genetically modified plants
EN 13442:2002 Wood and parquet flooring and wood panelling and cladding. Determination of the resistance to chemical agents
EN 13443-1:2002 Water conditioning equipment inside buildings. Mechanical filters. Performance rating 80 $Gmm to 150 $Gmm. Requirements for performances, safety and testing
EN 13444-1:2001 Electrically propelled road vehicles. Measurement of emissions of hybrid vehicles. Electrically propelled road vehicles. Measurement of emissions of hybrid vehicles.
EN 13445-1:2002 Unfired pressure vessels. General
EN 13445-2:2002 Unfired pressure vessels. Materials
EN 13445-3:2002 Unfired pressure vessels. Design





To receive a price quote for any EN standard, please review our partners on the right


Return To The EN Standards Glossary Index






HOW TO OBTAIN STANDARDS 
To receive a direct quote for any EN standard, please review our partners below.

OTHER INFORMATION





Copyright StandardsDirect. European Standards.