EN 13523-11:2004 -
The StandardsDirect Glossary of European / EN Standards
THE EN STANDARDS GLOSSARY
en standards, European standards
Glossary of BC, ISO, and EN Standards

EN 13523-11:2004 Onwards

Standard No Title of Standard
EN 13523-11:2004 Coil coated metals. Test methods. Resistance to solvents (rubbing test)
EN 13523-12:2004 Coil coated metals. Test methods. Resistance to scratching
EN 13523-13:2001 Coil coated metals. Test methods. Resistance to accelerated ageing by the use of heat
EN 13523-14:2001 Coil coated metals. Test methods. Chalking (Helmen method)
EN 13523-15:2002 Coil coated metals. Test methods. Metamerism
EN 13523-16:2004 Coil coated metals. Test methods. Resistance to abrasion
EN 13523-17:2004 Coil coated metals. Test methods. Adhesion of strippable films
EN 13523-18:2002 Coil coated metals. Test methods. Resistance to staining
EN 13523-19:2004 Coil coated metals. Test methods. Panel design and method of atmospheric exposure testing
EN 13523-2:2001 Coil coated metals. Test methods. Specular gloss
EN 13523-20:2004 Coil coated metals. Test methods. Foam adhesion
EN 13523-21:2003 Coil coated metals. Test methods. Evaluation of outdoor exposed panels
EN 13523-22:2003 Coil coated metals. Test methods. Colour difference. Visual comparison
EN 13523-23:2002 Coil coated metals. Test methods. Colour stability in humid atmospheres containing sulfur dioxide
EN 13523-24:2004 Coil coated metals. Test methods. Resistance to blocking and pressure marking
EN 13523-3:2001 Coil coated metals. Test methods. Colour difference. Instrumental comparison
EN 13523-4:2001 Coil coated metals. Test methods. Pencil hardness
EN 13523-5:2001 Coil coated metals. Test methods. Resistance to rapid deformation (impact test)
EN 13523-6:2002 Coil coated metals. Test methods. Adhesion after indentation (cupping test)
EN 13523-7:2001 Coil coated metals. Test methods. Resistance to cracking on bending (T-bend test)
EN 13523-8:2002 Coil coated metals. Test methods. Resistance to salt spray (fog)
EN 13523-9:2001 Coil coated metals. Test methods. Resistance to water immersion
EN 13524:2003 Highway maintenance machines. Safety requirements
EN 13525:2005 Forestry machinery. Wood chippers. Safety
EN 13526:2002 Stationary source emissions. Determination of the mass concentration of total gaseous organic carbon in flue gases from solvent using processes.
EN 13527:2000 Shutters and blinds. Measurement of operating force. Test methods
EN 13528-1:2002 Ambient air quality. Diffusive samplers for the determination of concentrations of gases and vapours. Requirements and test methods. General requirements
EN 13528-2:2002 Ambient air quality. Diffusive samplers for the determination of concentrations of gases and vapours. Requirements and test methods. Specific requirements and test methods
EN 13528-3:2003 Ambient air quality. Diffusive samplers for the determination of concentrations of gases and vapours. Requirements and test methods. Guide to selection, use and maintenance
EN 13529:2003 Products and systems for the protection and repair of concrete structures. Test methods. Determination of resistance to severe chemical attack
EN 1353:1997 Determination of moisture content of autoclaved aerated concrete
EN 13530-1:2002 Cryogenic vessels. Large transportable vacuum insulated vessels. Fundamental requirements
EN 13530-2:2002 Cryogenic vessels. Large transportable vacuum insulated vessels. Design, fabrication, inspection and testing
EN 13530-3:2002 Cryogenic vessels. Large transportable vacuum insulated vessels. Operational requirements
EN 13531:2001 Earth-moving machinery. Tip-over protection structure (TOPS) for compact excavators. Laboratory tests and performance requirements
EN 13532:2002 General requirements for in vitro diagnostic medical devices for self-testing
EN 13535:2001 Fertilizers and liming materials. Classification
EN 13536:2002 Manufactured articles filled with feather and down. Requirements for clothing. Light use
EN 13537:2002 Requirements for sleeping bags
EN 13538-1:2002 Determination of dimensional characteristics of sleeping bags. Internal dimensions
EN 13538-2:2002 Determination of dimensional characteristics of sleeping bags. Thickness and elastic recovery
EN 13538-3:2002 Determination of dimensional characteristics of sleeping bags. Volume under load and easiness of packing
EN 1354:1997 Determination of compressive strength of lightweight aggregate concrete with open structure
EN 13540:2002 Leather. Physical and mechanical tests. Determination of heat resistance of patent leather
EN 13541:2001 Glass in building. Security glazing. Testing and classification of resistance against explosion pressure
EN 13542:2001 Manufactured articles filled with feather and down. Method for determining the compressibility index of clothing
EN 13543:2001 Manufactured articles filled with feather and down. Measurement of water absorption of filling material
EN 13544-1:2001 Respiratory therapy equipment. Nebulizing systems and their components
EN 13544-2:2002 Respiratory therapy equipment. Tubing and connectors
EN 13544-3:2001 Respiratory therapy equipment. Air entrainment devices
EN 13545:2002 Pallet superstructures. Pallet collars. Test methods and performance requirements
EN 13546:2002 Protective clothing. Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goalkeepers, and shin protectors for field players. Requirements and test methods
EN 13549:2001 Cleaning services. Basic requirements and recommendations for quality measuring systems
EN 1355:1997 Determination of creep strains under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure
EN 13551:2003 Inland navigation vessels. Vocabulary
EN 13553:2002 Resilient floor coverings. Polyvinyl chloride floor coverings for use in special wet areas. Specification
EN 13554:2002 Non-destructive testing. Acoustic emission. General principles
EN 13555:2004 Flanges and their joints. Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
EN 13556:2003 Round and sawn timber. Nomenclature of timbers used in Europe
EN 13557:2003 Cranes. Controls and control stations
EN 13558:2003 Specifications for impact modified extruded acrylic sheets for shower trays for domestic purposes
EN 13559:2003 Specifications for impact modified coextruded ABS/Acrylic sheets for baths and shower trays for domestic purposes
EN 1356:1997 Performance test for prefabricated reinforced components of autoclaved aerated concrete or lightweight aggregate concrete with open structure under transverse load
EN 13560:2001 Surface active agents. Determination of amide nitrogen content. Potentiometric titration
EN 13561:2004 External blinds. Performance requirements including safety
EN 13562:2000 Geotextiles and geotextile-related products. Determination of resistance to penetration by water (hydrostatic pressure test)
EN 13564-1:2002 Anti-flooding devices for buildings. Requirements
EN 13564-2:2002 Anti-flooding devices for buildings. Test methods
EN 13564-3:2003 Anti-flooding devices for buildings. Quality assurance
EN 13565-1:2003 Fixed firefighting systems. Foam systems. Requirements and test methods for components
EN 13566-1:2002 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks. General
EN 13566-3:2002 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks. Lining with close fit pipes
EN 13566-4:2002 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks. Lining with cured-in-place pipes
EN 13567:2002 Protective clothing. Hand, arm, chest, abdomen, leg, genital and face protectors for fencers. Requirements and test methods
EN 13569:2001 Cabinet roller towels. Performance requirements and processing
EN 13570:2005 Food processing machinery. Mixers and mixing machines. Safety and hygiene requirements
EN 13571:2002 Footwear. Test methods for uppers, lining and insocks. Tear strength
EN 13572:2002 Footwear. Test methods for uppers, lining and insocks. Seam strength
EN 13573:2001 Inland navigation vessels. Anchoring, coupling, towing, hauling and mooring systems
EN 13574:2001 Inland navigation vessels. Permanently installed climbing devices with a length not exceeding 5 m
EN 13575:2004 Thermoplastics tanks made from blow or rotational moulded polyethylene. Tanks for the above ground storage of chemicals. Requirements and test methods
EN 13578:2003 Products and systems for the protection and repair of concrete structures. Test method. Compatibility on wet concrete
EN 13579:2002 Products and systems for the protection and repair of concrete structures. Test methods. Drying test for hydrophobic impregnation
EN 13580:2002 Products and systems for the protection and repair of concrete structures. Test methods. Water absorption and resistance to alkali for hydrophobic impregnations
EN 13581:2002 Products and systems for the protection and repair of concrete structures. Test methods. Determination of loss of mass of hydrophobic impregnated concrete after freeze-thaw salt stress
EN 13583:2001 Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of hail resistance
EN 13584:2003 Products and systems for the protection and repair of concrete structures. Test methods. Determination of creep in compression for repair products
EN 13585:2002 Foodstuffs. Determination of fumonisins B1 and B2 in maize. HPLC method with solid phase extraction clean-up
EN 13586:2004 Cranes. Access
EN 13587:2003 Methods of test for petroleum and its products. BS2000-519. Bitumen and bituminous binders. Determination of the tensile properties of bituminous binders by the tensile test method
EN 13588:2004 Bitumen and bituminous binders. Determination of cohesion of bituminous binders with pendulum test
EN 13589:2003 Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of the tensile properties of modified bitumen by the force ductility method
EN 1359:1999 Gas meters. Diaphragm gas meters
EN 13590:2003 Packaging. Flexible carrier bags for the transport of various retail goods. General characteristics and test methods for the determination of volume and carrying capacity
EN 13592:2003 Plastics sacks for household waste collection. Types, requirements and test methods
EN 13593:2003 Packaging. Paper sacks for household waste collection. Types, requirements and test methods
EN 13594:2002 Protective gloves for professional motorcycle riders. Requirements and test methods
EN 13595-1:2002 Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits. General requirements
EN 13595-2:2002 Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits. Test method for determination of impact abrasion resistance
EN 13595-3:2002 Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits. Test method for determination of burst strength
EN 13595-4:2002 Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits. Test methods for the determination of impact cut resistance
EN 13596:2004 Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of bond strength
EN 13597:2003 Railway applications. Rubber suspension components. Rubber diaphragms for pneumatic suspension springs
EN 13598-1:2003 Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE).
EN 13599:2002 Copper and copper alloys. Copper plate, sheet and strip for electrical purposes
EN 136:1998 Respiratory protective devices. Full face masks. Requirements, testing, marking
EN 1360:1997 Rubber hoses and hose assemblies for measured fuel dispensing. Specification
EN 13600:2002 Copper and copper alloys. Seamless copper tubes for electrical purposes
EN 136000:1993 Harmonized system of quality assessment for electronic components: generic specification: magnetrons
EN 136001:1996 Specification for harmonized system of quality assessment for electronic components. Blank detail specification: pulsed magnetrons (excluding frequency agile magnetrons)
EN 136002:1996 Specification for harmonized system of quality assessment for electronic components. Blank detail specification: CW magnetrons for RF heating or cooking applications
EN 13601:2002 Copper and copper alloys. Copper rod, bar and wire for general electrical purposes
EN 13602:2002 Copper and copper alloys. Drawn, round copper wire for the manufacture of electrical conductors
EN 13603:2002 Copper and copper alloys. Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes
EN 13604:2002 Copper and copper alloys. Products of high conductivity copper for electronic tubes, semiconductor devices and vacuum applications





To receive a price quote for any EN standard, please review our partners on the right


Return To The EN Standards Glossary Index






HOW TO OBTAIN STANDARDS 
To receive a direct quote for any EN standard, please review our partners below.

OTHER INFORMATION





Copyright StandardsDirect. European Standards.