EN 13889:2003 -
The StandardsDirect Glossary of European / EN Standards
THE EN STANDARDS GLOSSARY
en standards, European standards
Glossary of BC, ISO, and EN Standards

EN 13889:2003 Onwards

Standard No Title of Standard
EN 13889:2003 Forged steel shackles for general lifting purposes. Dee shackles and bow shackles. Grade 6. Safety
EN 1389:2003 Advanced technical ceramics. Ceramic composites. Physical properties. Determination of density and apparent porosity
EN 13890:2002 Workplace atmospheres. Procedures for measuring metals and metalloids in airborne particles. Requirements and test methods
EN 13891:2003 Tensional strapping. Guide to selection and use of tensional strapping
EN 13892-1:2002 Methods of test for screed materials. Sampling, making and curing specimens for test
EN 13892-2:2002 Methods of test for screed materials. Determination of flexural and compressive strength
EN 13892-3:2004 Methods of test for screed materials. Determination of wear resistance-Bohme
EN 13892-4:2002 Methods of test for screed materials. Determination of wear resistance-BCA
EN 13892-5:2003 Methods of test for screed materials. Determination of wear resistance to rolling wheel of screed material for wearing layer
EN 13892-6:2002 Methods of test for screed materials. Determination of surface hardness
EN 13892-7:2003 Methods of test for screed materials. Determination of wear resistance to rolling wheel of screed material with floor coverings
EN 13892-8:2002 Methods of test for screed materials. Determination of bond strength
EN 13893:2002 Resilient, laminate and textile floor coverings. Measurement of dynamic coefficient of friction on dry floor surfaces
EN 13894-1:2003 Products and systems for the protection and repair of concrete structures. Test methods. Determination of fatigue under dynamic loading. During cure
EN 13894-2:2002 Products and systems for the protection and repair of concrete structures. Test methods. Determination of fatigue under dynamic loading. After hardening
EN 13895:2003 Textiles. Monofilaments. Determination of tensile properties
EN 13898:2003 Machine tools. Safety. Sawing machines for cold metal
EN 13899:2003 Roller sports equipment. Roller skates. Safety requirements and test methods
EN 13900-1:2003 Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics. General introduction
EN 13900-2:2003 Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics.
EN 13900-3:2003 Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics.
EN 13900-4:2004 Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics.
EN 13900-5:2005 Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics. Determination by filter pressure value test
EN 13904:2003 Low resistance shower outlets for sanitary tapware
EN 13905:2003 Low resistance shower hoses for sanitary tapware
EN 13906-1:2002 Cylindrical helical springs made from round wire and bar. Calculation and design. Compression springs
EN 13906-2:2001 Cylindrical helical springs made from round wire and bar. Calculation and design. Extension springs
EN 13906-3:2001 Cylindrical helical springs made from round wire and bar. Calculation and design. Torsion springs
EN 1391:1998 Adhesives for leather and footwear materials. A method for evaluating the bondability of materials. Minimum requirements and material classification
EN 13911:2004 Protective clothing for firefighters. Requirements and test methods for fire hoods for firefighters
EN 13913:2003 Railway applications. Rubber suspension components. Elastomer-based mechanical parts
EN 13914-1:2005 Design, preparation and application of external rendering and internal plastering. External rendering
EN 13914-2:2005 Design, preparation and application of external rendering and internal plastering. Design considerations and essential principles for internal plastering
EN 13918:2003 Gas welding equipment. Integrated flowmeter regulators used on cylinders for welding, cutting and allied processes. Classification, specification and tests
EN 13919:2002 Natural stone test methods. Determination of resistance to ageing by SO$d2 action in the presence of humidity
EN 1392:1998 Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Test methods for measuring the bond strength under specified conditions
EN 13920-1:2003 Aluminium and aluminium alloys. Scrap. General requirements, sampling and tests
EN 13920-10:2003 Aluminium and aluminium alloys. Scrap. Scrap consisting of used aluminium beverage cans
EN 13920-11:2003 Aluminium and aluminium alloys. Scrap. Scrap consisting of aluminium-copper radiators
EN 13920-12:2003 Aluminium and aluminium alloys. Scrap. Turnings consisting of one single alloy
EN 13920-13:2003 Aluminium and aluminium alloys. Scrap. Mixed turnings consisting of two or more alloys
EN 13920-14:2003 Aluminium and aluminium alloys. Scrap. Scrap from post-consumer aluminium packagings
EN 13920-15:2003 Aluminium and aluminium alloys. Scrap. Decoated aluminium scrap from post-consumer aluminium packagings
EN 13920-16:2003 Aluminium and aluminium alloys. Scrap. Scrap consisting of skimmings, drosses, spills and metallics
EN 13920-2:2003 Aluminium and aluminium alloys. Scrap. Unalloyed aluminium scrap
EN 13920-3:2003 Aluminium and aluminium alloys. Scrap. Wire and cable scrap
EN 13920-4:2003 Aluminium and aluminium alloys. Scrap. Scrap consisting of one single wrought alloy
EN 13920-5:2003 Aluminium and aluminium alloys. Scrap. Scrap consisting of two or more wrought alloys of the same series
EN 13920-6:2003 Aluminium and aluminium alloys. Scrap. Scrap consisting of two or more wrought alloys
EN 13920-7:2003 Aluminium and aluminium alloys. Scrap. Scrap consisting of castings
EN 13920-8:2003 Aluminium and aluminium alloys. Scrap. Scrap consisting of non-ferrous materials from shredding processes destined to aluminium separation processes
EN 13920-9:2003 Aluminium and aluminium alloys. Scrap. Scrap from aluminium separation processes of non-ferrous shredded materials
EN 13922:2003 Tanks for transport of dangerous goods. Service equipment for tanks. Overfill prevention systems for liquid fuels
EN 13925-1:2003 Non-destructive testing. X-ray diffraction from polycrystalline and amorphous materials. General principles
EN 13925-2:2003 Non-destructive testing. X-ray diffraction from polycrystalline and amorphous materials. Procedures
EN 13925-3:2005 Non-destructive testing. X-ray diffraction from polycrystalline and amorphous materials. Instruments
EN 13926:2003 Surface active agents. Alkoxylated derivatives. Determination of hydroxyl value. N-methyl imidazole method
EN 13927:2003 Non-destructive testing. Visual testing. Equipment
EN 1393:1997 Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of initial longitudinal tensile properties
EN 13938-1:2004 Explosives for civil uses. Propellants and rocket propellants. Requirements
EN 13938-2:2004 Explosives for civil uses. Propellants and rocket propellants. Determination of resistance to electrostatic energy
EN 13938-3:2003 Explosives for civil uses. Propellants and rocket propellants. Determination of deflagration to detonation transition
EN 13938-4:2003 Explosives for civil uses. Propellants and rocket propellants. Determination of burning rate under ambient conditions
EN 13938-5:2004 Explosives for civil uses. Propellants and rocket propellants. Determination of voids and fissures
EN 13938-6:2004 Explosives for civil uses. Propellants and rocket propellants. Solid rocket propellants. Guide for the determination of integrity of inhibitor coatings
EN 13938-7:2004 Explosives for civil uses. Propellants and rocket propellants. Determination of properties of black powder
EN 1394:1997 Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the apparent initial circumferential tensile strength
EN 13941:2003 Design and installation of preinsulated bonded pipe systems for direct heating
EN 13942:2003 Petroleum and natural gas industries. Pipeline transportation. Pipeline valves
EN 13946:2003 Water quality. Guidance standard for the routine sampling and pretreatment of benthic diatoms from rivers
EN 13949:2003 Respiratory equipment. Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen. Requirements, testing, marking
EN 1395:1996 Thermal spraying. Acceptance inspection of thermal spraying equipment
EN 13951:2003 Liquid pumps. Safety requirements. Agrifoodstuffs equipment. Design rules to ensure hygiene in use
EN 13952:2003 LPG cylinders. Filling procedures
EN 13953:2003 Pressure relief valves for transportable refillable cylinders for liquefied petroleum gas (LPG)
EN 13955:2002 Surface active agents. Determination of Krafft point and solubility of ionic surface active agents
EN 13957:2003 Aluminium and aluminium alloys. Extruded round, coiled tube for general applications. Specification
EN 13958:2003 Aluminium and aluminium alloys. Cold drawn, round coiled tube for general applications. Specification
EN 1396:1997 Aluminium and aluminium alloys. Coil coated sheet and strip for general applications. Specifications
EN 13964:2004 Suspended ceilings. Requirements and test methods
EN 13965-1:2004 Characterisation of waste. Terminology. Material related terms and definitions
EN 13965-2:2004 Characterization of waste. Terminology. Management related terms and definitions
EN 13966-1:2003 Determination of the transfer efficiency of atomising and spraying equipment for liquid coating materials. Flat panels
EN 13967:2004 Flexible sheets for waterproofing. Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet. Definitions and characteristics
EN 13969:2004 Flexible sheets for waterproofing. Bitumen damp proof sheets including bitumen basement tanking sheets. Definitions and characteristics
EN 1397:1999 Heat exchangers. Hydronic room fan coil units. Test procedures for establishing the performance
EN 13970:2004 Flexible sheets for waterproofing. Bitumen water vapour control layers. Definitions and characteristics
EN 13971:2002 Carbonate liming materials. Determination of reactivity. Potentiometric titration method with hydrochloric acid
EN 13972:2002 Rigid plastic containers. Definition of nominal, brimful and total capacity and measurement of brimful and total capacity
EN 13973:2002 Rigid plastics containers. Method for determination of drainability
EN 13974:2002 Rigid plastics containers. Specification of tolerance for dimensions, weight and volume
EN 13975:2003 Sampling procedures used for acceptance testing of in vitro diagnostic medical devices. Statistical aspects
EN 13976-1:2003 Rescue systems. Transportation of incubators. Interface conditions
EN 13976-2:2003 Rescue systems. Transportation of incubators. System requirements
EN 13977:2005 Railway applications. Track. Safety requirements for portable machines and trolleys for construction and maintenance
EN 13978-1:2005 Precast concrete products. Precast concrete garages. Requirements for reinforced garages monolithic or consisting of single sections with room dimensions
EN 13979-1:2003 Railway applications. Wheelsets and bogies. Monobloc wheels. Technical approval. Forged and rolled wheels
EN 1398:1998 Dock levellers
EN 13980:2002 Potentially explosive atmospheres. Application of quality systems
EN 13981-1:2003 Aluminium and aluminium alloys. Products for structural railway applications. Technical conditions for inspection and delivery. Extruded products
EN 13981-2:2004 Aluminium and aluminium alloys. Products for structural railway applications. Technical conditions for inspection and delivery. Plates and sheets
EN 13984:2004 Flexible sheets for waterproofing. Plastic and rubber vapour control layers. Definitions and characteristics
EN 13985:2003 Machine tools. Safety. Guillotine shears
EN 13986:2004 Wood-based panels for use in construction. Characteristics, evaluation of conformity and marking
EN 1399:1998 Resilient floor coverings. Determination of resistance to stubbed and burning cigarettes
EN 13990:2004 Wood flooring. Solid softwood floor boards
EN 13991:2003 Derivatives from coal pyrolysis. Coal tar based oils. Creosotes. Specifications and test methods
EN 13996:2002 Surface active agents. Foaming power and antifoaming power. Turbine stirring method
EN 13997:2003 Irrigation techniques. Connection and control accessories for use in irrigation systems. Technical characteristics and testing
EN 14:1995 Dimensions of bed blankets
EN 140:1999 Respiratory protective devices. Half masks and quarter masks. Requirements, testing, marking
EN 1400-1:2002 Child use and care articles. Soothers for babies and young children. General safety requirements and product information
EN 1400-2:2002 Child use and care articles. Soothers for babies and young children. Mechanical requirements and tests
EN 1400-3:2002 Child use and care articles. Soothers for babies and young children. Chemical requirements and tests
EN 14010:2003 Safety of machinery. Equipment for power driven parking of motor vehicles. Safety and EMC requirements for design, manufacturing, erection and commissioning stages





To receive a price quote for any EN standard, please review our partners on the right


Return To The EN Standards Glossary Index






HOW TO OBTAIN STANDARDS 
To receive a direct quote for any EN standard, please review our partners below.

OTHER INFORMATION





Copyright StandardsDirect. European Standards.