EN 14361:2004 -
The StandardsDirect Glossary of European / EN Standards
THE EN STANDARDS GLOSSARY
en standards, European standards
Glossary of BC, ISO, and EN Standards

EN 14361:2004 Onwards

Standard No Title of Standard
EN 14361:2004 Aluminium and aluminium alloys. Chemical analysis. Sampling from metal melts
EN 14362-1:2003 Textiles. Methods for the determination of certain aromatic amines derived from azo colorants. Detection of the use of certain azo colorants accessible without extraction
EN 14362-2:2003 Textiles. Methods for the determination of certain aromatic amines derived from azo colorants. Detection of the use of certain azo colorants accessible by extracting the fibres
EN 14366:2004 Laboratory measurement of noise from waste water installations
EN 14368:2003 Products used for treatment of water intended for human consumption. Manganese dioxide coated limestone
EN 14369:2003 Products used for treatment of water intended for human consumption. Iron-coated granular activated alumina
EN 1437:2002 Plastics piping systems. Piping systems for underground drainage and sewerage. Test method for resistance to combined temperature cycling and external loading
EN 14370:2004 Surface active agents. Determination of surface tension
EN 14371:2004 Surface active agents. Determination of foamability and degree of foamability. Circulation test method
EN 14372:2004 Child use and care articles. Cutlery and feeding utensils. Safety requirements and tests
EN 14374:2004 Timber structures. Structural laminated veneer lumber. Requirements
EN 14375:2003 Child-resistant non-reclosable packaging for pharmaceutical products. Requirements and testing
EN 1438:1998 Symbols for timber and wood-based products
EN 14382:2002 Safety devices for gas pressure regulating stations and installations. Gas safety shut-off devices for operating pressure up to 100 bar
EN 14385:2004 Stationary source emissions. Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V
EN 14387:2004 Respiratory protective devices. Gas filter(s) and combined filter(s). Requirements, testing, marking
EN 14389-2:2004 Road traffic noise reducing devices. Procedures for assessing long term performance. Non-acoustical characteristics
EN 1439:1997 Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG). Procedure for checking before, during and after filling
EN 14395-1:2004 Influence of organic materials on water intended for human consumption. Organoleptic assessment of water in storage systems. Test method
EN 14396:2004 Fixed ladders for manholes
EN 14397-2:2004 Fertilizers and liming materials. Determination of carbon dioxide. Method for liming materials
EN 14398-1:2003 Cryogenic vessels. Large transportable non-vacuum insulated vessels. Fundamental requirements
EN 14398-2:2003 Cryogenic vessels. Large transportable non-vacuum insulated vessels. Design, fabrication, inspection and testing
EN 14398-3:2003 Cryogenic vessels. Large transportable non-vacuum insulated vessels. Operational requirements
EN 1440:1997 Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG). Periodic requalification
EN 14404:2004 Personal protective equipment. Knee protectors for work in the kneeling position
EN 14406:2004 Products and systems for the protection and repair of concrete structures. Test methods. Determination of the expansion ratio and expansion evolution
EN 14407:2004 Water quality. Guidance standard for the identification, enumeration and interpretation of benthic diatom samples from running waters
EN 144-1:2000 Respiratory protective devices. Gas cylinder valves. Thread connections for insert connector
EN 14410:2003 Self adhesive tapes. Measurement of breaking strength and elongation at break
EN 14411:2003 Ceramic tiles. Definitions, classification, characteristics and marking
EN 14412:2004 Indoor air quality. Diffusive samplers the determination of concentrations of gases and vapours. Guide for selection, use and maintenance
EN 14413-1:2004 Recreational diving services. Safety related minimum requirements for the training of scuba instructors. Level 1
EN 14413-2:2004 Recreational diving services. Safety related minimum requirements for the training of scuba instructors. Level 2
EN 14414:2004 Geosynthetics. Screening test method for determining chemical resistance for landfill applications
EN 14415:2004 Geosynthetic barriers. Test method for determining the resistance to leaching
EN 14419:2003 District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Surveillance systems
EN 1442:1998 Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG). Design and construction
EN 144-2:1999 Respiratory protective devices. Gas cylinder valves. Outlet connections
EN 14427:2004 Transportable refillable fully wrapped composite cylinders for Liquefied Petroleum Gases (LPG). Design and construction
EN 14428:2004 Shower enclosures. Functional requirements and test methods
EN 1443:2003 Chimneys. General requirements
EN 144-3:2003 Respiratory protective devices. Gas cylinder valves. Outlet connections for diving gases Nitrox and oxygen
EN 14430:2004 Vitreous and porcelain enamels. High voltage test
EN 14431:2004 Vitreous and porcelain enamels. Characteristics of the enamel coatings applied to steel panels intended for architecture
EN 14434:2004 Writing boards for educational institutions. Ergonomic, technical and safety requirements and their test methods
EN 14435:2004 Respiratory protective devices. Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only.
EN 14436:2004 Copper and copper alloys. Electrolytically tinned strip
EN 14437:2004 Determination of the uplift resistance of clay or concrete tiles for roofing. Roof system test method
EN 1444:2001 Fibre-cement pipelines. Guide for laying and on-site work practices
EN 14450:2005 Secure storage units. Requirements, classification and methods of test for resistance to burglary. Secure safe cabinets
EN 14456:2004 Products used for treatment of water intended for human consumption. Bone charcoal
EN 14457:2004 General requirements for components specifically designed for use in trenchless construction of drains and sewers
EN 14458:2004 Personal eye-equipment. Faceshields and visors for use with firefighters and high performance industrial safety helmets used by firefighters, ambulance and emergency services
EN 1446:1996 Plastics piping and ducting systems.Thermoplastics pipes. Determination of ring flexibility
EN 14462:2005 Surface treatment equipment. Noise test code for surface treatment equipment including its ancillary handling equipment. Accuracy grades 2 and 3
EN 14465:2003 Textiles. Upholstery fabrics. Specification and methods of test
EN 14466:2005 Fire fighting pumps. Portable pumps. Safety and performance requirements, tests
EN 14467:2004 Recreational diving services. Requirements for recreational scuba diving service providers
EN 14468-2:2005 Table tennis. Posts for net assemblies. Requirements and test methods
EN 14469-1:2004 Pigments and extenders. Testing of colouring materials in plasticized polyvinyl chloride (PVC-P). Composition and preparation of basic mixtures
EN 14469-2:2004 Pigments and extenders. Testing of colouring materials in plasticized polyvinyl chloride (PVC-P). Preparation of test specimens
EN 14469-3:2004 Pigments and extenders. Testing of colouring materials in plasticized polyvinyl chloride (PVC-P). Determination of the relative tinting strength of white pigments
EN 14469-4:2004 Pigments and extenders. Testing of colouring materials in plasticized polyvinyl chloride (PVC-P). Determination of bleeding of colouring materials
EN 1447:1997 Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of long-term resistance to internal pressure
EN 14470-1:2004 Fire safety storage cabinets. Safety storage cabinets for flammable liquids
EN 14474:2004 Precast concrete products. Concrete with wood-chips as aggregate. Requirements and test methods
EN 14476:2005 Chemical disinfectants and antiseptics. Virucidal quantitative suspension test for chemical disinfectants and antiseptics used in human medicine.
EN 14478:2005 Railway applications. Braking. Generic vocabulary
EN 1448:1997 Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) components. Test methods to prove the design of rigid locked socket-and-spigot joints with elastomeric seals
EN 14480:2004 Surface active agents. Determination of anionic surface active agents. Potentiometric two-phase titration method
EN 14481:2003 Materials and articles in contact with foodstuffs. Plastics. Test methods for the determination of fatty contact
EN 14483-1:2004 Vitreous and porcelain enamels. Determination of resistance to chemical corrosion. Determination of resistance to chemical corrosion by acids at room temperature
EN 14483-2:2004 Vitreous and porcelain enamels. Determination of resistance to chemical corrosion. Determination of resistance to chemical corrosion by boiling acids, neutral liquids and/or their vapours
EN 14483-3:2004 Vitreous and porcelain enamels. Determination of resistance to chemical corrosion. Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel
EN 14483-4:2004 Vitreous and porcelain enamels. Determination of resistance to chemical corrosion. Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel
EN 14483-5:2004 Vitreous and porcelain enamels. Determination of resistance to chemical corrosion. Determination of resistance to chemical corrosion in closed systems
EN 14484:2003 Health informatics. International transfer of personal health data covered by the EU data protection directive. High level security policy
EN 14485:2003 Health informatics. Guidance for handling personal health data in international applications in the context of the EU data protection directive
EN 14486:2005 Water quality. Detection of human enteroviruses by monolayer plaque assay
EN 1449:1997 Plastics piping systems. Glass reinforced thermosetting plastics (GRP) components. Test methods to prove the design of cemented socket-and-spigot joints
EN 14493:2002 Structural adhesives. Determination of dynamic resistance to cleavage of high strength adhesive bonds under impact conditions. Wedge impact method
EN 14499:2004 Textile floor coverings. Minimum requirements for carpet underlays
EN 145:1998 Respiratory protective devices. Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type. Requirements, testing, marking
EN 1450:1997 Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) components. Test methods to prove the design of bolted flange joints
EN 14503:2003 Inland navigation vessels. Harbours for inland navigation
EN 14504:2004 Inland navigation vessels. Floating landing stages. Requirements, tests
EN 14505:2005 Cathodic protection of complex structures
EN 14508:2003 Postal services. Quality of service. Measurement of the transit time of end-to-end services for single piece non-priority mail and second class mail
EN 14510:2005 Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Determination of sole positioning tack (spotting tack)
EN 1451-1:2000 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP). Specifications for pipes, fittings and the system
EN 14511-1:2004 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling. Terms and definitions
EN 14511-2:2004 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling. Test conditions
EN 14511-3:2004 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling. Test methods
EN 14511-4:2004 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling. Requirements
EN 14514:2004 Space engineering standards. Functional analysis
EN 14517:2004 Methods of test for petroleum and its products. BS 2000-526: Liquid petroleum products. Determination of hydrocarbon types and oxygenates in petrol.
EN 1452-1:2000 Plastics piping systems for water supply. Unplasticized poly(vinyl chloride) (PVC-U). General
EN 14521:2004 Resilient floor coverings. Specification for smooth rubber floor coverings with or without foam backing with a decorative layer
EN 1452-2:2000 Plastics piping systems for water supply. Unplasticized poly(vinyl chloride) (PVC-U). Pipes
EN 1452-3:2000 Plastics piping systems for water supply. Unplasticized poly(vinyl chloride) (PVC-U). Fittings
EN 1452-4:2000 Plastics piping systems for water supply. Unplasticized poly(vinyl chloride) (PVC-U). Valves and ancillary equipment
EN 14524:2004 Foodstuffs. Determination of okadaic acid in mussels. HPLC method with solid phase extraction clean-up, derivatization and fluorimetric detection
EN 1452-5:2000 Plastics piping systems for water supply. Unplasticized poly(vinyl chloride) (PVC-U). Fitness for purpose of the system
EN 14526:2004 Foodstuffs. Determination of saxitoxin and dc-saxitoxin in mussels. HPLC method using pre-column derivatization with peroxide or periodate oxidation
EN 14530:2004 Workplace atmospheres. Determination of diesel particulate matter. General requirements
EN 1453-1:2000 Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings. Unplasticized poly (vinyl chloride) (PVC-U).
EN 14531-1:2005 Railway applications. Methods for calculation of stopping distances, slowing distances and immobilization braking. General algorithms
EN 14532-1:2004 Welding consumables. Test methods and quality requirements. Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys
EN 14532-2:2004 Welding consumables. Test methods and quality requirements. Supplementary mekthods and conformity assessment of consumables for steel, nickel and nickel alloys
EN 14532-3:2004 Welding consumables. Test methods and quality requirements. Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys
EN 14533:2003 Textiles and textile products. Burning behaviour of bedding items. Classification scheme
EN 14534:2003 Postal services. Quality of service. Measurement of the transit time of end-to-end services for bulk mail
EN 1454:1997 Portable, hand-held, internal combustion cutting-off machines. Safety
EN 14540:2004 Fire-fighting hoses. Non-percolating layflat hoses for fixed systems





To receive a price quote for any EN standard, please review our partners on the right


Return To The EN Standards Glossary Index






HOW TO OBTAIN STANDARDS 
To receive a direct quote for any EN standard, please review our partners below.

OTHER INFORMATION





Copyright StandardsDirect. European Standards.