EN 1934:1998 -
The StandardsDirect Glossary of European / EN Standards
THE EN STANDARDS GLOSSARY
en standards, European standards
Glossary of BC, ISO, and EN Standards

EN 1934:1998 Onwards

Standard No Title of Standard
EN 1934:1998 Thermal performance of buildings. Determination of thermal resistance by hot box method using heat flow meter. Masonry
EN 1935:2002 Building hardware. Single-axis hinges. Requirements and test methods
EN 1936:1999 Natural stone test methods. Determination of real density and apparent density and of total and open porosity
EN 1937:1999 Test method for hydraulic setting floor smoothing and/or levelling compounds. Standard mixing procedures
EN 1938:1999 Personal eye protection. Goggles for motorcycle and moped users
EN 1939:2003 Self adhesive tapes. Determination of peel adhesion properties
EN 1940:1996 Self adhesive tapes. Measurement of breaking strength
EN 1941:1996 Self adhesive tapes. Measurement of elongation at break
EN 1942:2003 Self adhesive tapes. Measurement of thickness
EN 1943:2002 Self adhesive tapes. Measurement of static shear adhesion
EN 1944:1996 Self adhesive tapes. Measurement of unwind adhesion at low speed
EN 1945:1996 Self adhesive tapes. Measurement of quick stick
EN 1946-1:1999 Thermal performance of building products and components. Specific criteria for the assessment of laboratories measuring heat transfer properties. Common criteria
EN 1946-2:1999 Thermal performance of building products and components.
EN 1946-3:1999 Thermal performance of building products and components. Specific criteria for the assessment of laboratories measuring heat transfer properties. Measurements by heat flow meter method
EN 1946-4:2000 Measurements by hot box methods
EN 1946-5:2000 Thermal performance of building products and components. Specific criteria for the assessment of laboratories measuring heat transfer properties. Measurements by pipe test methods
EN 1947:2002 Fire-fighting hoses. Semi-rigid delivery hoses and hose assemblies for pumps and vehicles
EN 1948-1:1997 Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs. Sampling
EN 1948-2:1997 Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs. Extraction and clean-up
EN 1948-3:1997 Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs. Identification and quantification
EN 1949:2002 Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and in other road vehicles
EN 1953:1999 Atomizing and spraying equipment for coating materials. Safety requirements
EN 1957:2000 Domestic furniture. Beds and mattresses. Test methods for the determination of functional characteristics
EN 196000:1993 Harmonized system of quality assessment for electronic components. Generic specification. Electromechanical switches
EN 196-1:2005 Methods of testing cement. Determination of strength
EN 196103:2000 Blank detail specification: Rotary switches. Assessment level Y
EN 196-2:2005 Methods of testing cement. Chemical analysis of cement
EN 1963:1998 Textile floor coverings. Tests using the Lisson Tretrad machine
EN 196-3:2005 Methods of testing cement. Determination of setting time and soundness
EN 196403:2000 Harmonized systems of quality assessment for electronic components. Blank detail specification: push button switches. Assessment level Y
EN 1964-1:2000 Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres.
EN 1964-2:2001 Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres.
EN 1964-3:2000 Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres.
EN 196-5:2005 Methods of testing cement. Pozzolanicity test for pozzolanic cements
EN 196500:1993 Harmonized system of quality assessment for electronic components. Sectional specification. Membrane switches including blank detail specification EN 196501
EN 1965-1:2001 Structural adhesives. Corrosion. Determination and classification of corrosion to a copper substrate
EN 1965-2:2001 Structural adhesives. Corrosion. Determination and classification of corrosion to a brass substrate
EN 196-6:1992 Methods of testing cement. Determination of fineness
EN 1966:2002 Structural adhesives. Characterisation of a surface by measuring adhesion by means of the three point bending method
EN 196-7:1992 Methods of testing cement. Methods of taking and preparing samples of cement
EN 1967:2002 Structural adhesives. Evaluation of the effectiveness of surface treatment techniques for aluminium using a wet peel test in association with the floating roller method
EN 1968:2002 Transportable gas cylinders. Periodic inspection and testing of seamless steel gas cylinders
EN 196-8:2003 Methods of testing cement. Heat of hydration. Solution method
EN 1969:2000 Surfaces for sports areas. Determination of thickness of synthetic sports surfaces
EN 196-9:2003 Methods of testing cement. Heat of hydration. Semi-adiabatic method
EN 1970:2000 Adjustable beds for disabled persons. Requirements and test methods
EN 1971:1999 Copper and copper alloys. Eddy current test for tubes
EN 197-1:2000 Cement. Composition, specifications and conformity criteria for low heat common cements
EN 1972:1997 Diving accessories. Snorkels. Safety requirements and test methods
EN 197-2:2000 Cement. Conformity evaluation
EN 1974:1998 Food processing machinery. Slicing machines. Safety and hygiene requirements
EN 197-4:2004 Cement. Composition, specifications and conformity criteria for low early strength blastfurnace cements
EN 1975:2000 Transportable gas cylinders.
EN 1976:1998 Copper and copper alloys. Cast unwrought copper products
EN 1977:1998 Copper and copper alloys. Copper drawing stock (wire rod)
EN 1978:1998 Copper and copper alloys. Copper cathodes
EN 1979:1999 Plastics piping and ducting systems. Thermoplastics spirally-formed structured-wall pipes. Determination of the tensile strength of a seam
EN 1981:2003 Copper and copper alloys. Master alloys
EN 1982:1999 Copper and copper alloys. Ingots and castings
EN 1984:2000 Industrial valves. Steel gate valves
EN 1985:1999 Walking aids. General requirements and test methods
EN 1986-1:1997 Electrically propelled road vehicles. Measurement of energy performances. Pure electric vehicles
EN 1986-2:2001 Electrically propelled road vehicles. Measurement of energy performances. Thermal electric hybrid vehicles
EN 1987-1:1997 Electrically propelled road vehicles. Specific requirements for safety. On board energy storage
EN 1987-2:1997 Electrically propelled road vehicles. Specific requirements for safety. Functional safety means and protection against failures
EN 1987-3:1998 Electrically propelled road vehicles. Specific requirements for safety. Protection of users against electrical hazards
EN 1988-1:1998 Foodstuffs. Determination of sulfite. Optimized Monier-Williams method
EN 1988-2:1998 Foodstuffs. Determination of sulfite. Enzymatic method
EN 1989:2000 Thermoplastics piping systems. Joints for buried non-pressure sewerage applications.
EN 1990:2002 Eurocode. Basis of structural design
EN 1990:2002 (Package) Eurocode. Basis of structural design. Compilation of BS EN 1990:2002 and the National Annex.
EN 1991-1-1:2002 Eurocode 1. Actions on structures. General actions. Densities, self-weight, imposed loads for buildings
EN 1991-1-2:2002 Eurocode 1. Actions on structures. General actions. Actions on structures exposed to fire
EN 1991-1-3:2003 Eurocode 1. Actions on structures. General actions. Snow loads
EN 1991-1-4:2005 Eurocode 1. Actions on structures. General actions. Wind actions
EN 1991-1-5:2003 Eurocode 1. Actions on structures. General actions. Thermal actions
EN 1991-2:2003 Eurocode 1. Actions on structures. Traffic loads on bridges
EN 1992-1-1:2004 Eurocode 2. Design of concrete structures. General rules and rules for buildings
EN 1992-1-2:2004 Eurocode 2. Design of concrete structures. General rules. Structural fire design
EN 1993-1-1:2005 Eurocode 3. Design of steel structures. General rules and rules for buildings
EN 1993-1-10:2005 Eurocode 3. Design of steel structures. Material toughness and through-thickness properties
EN 1993-1-2:2005 Eurocode 3. Design of steel structures. General rules. Structural fire design
EN 1993-1-8:2005 Eurocode 3. Design of steel structures. Design of joints
EN 1993-1-9:2005 Eurocode 3. Design of steel structures. Fatigue
EN 1994-1-1:2004 Eurocode 4. Design of composite steel and concrete structures
EN 1995-1-1:2004 Eurocode 5. Design of timber structures. General. Common rules and rules for buildings
EN 1995-1-2:2004 Eurocode 5. Design of timber structures. General. Structural fire design
EN 1995-2:2004 Eurocode 5. Design of timber structures. Bridges
EN 1996-1-2:2005 Eurocode 6. Design of masonry structures. General rules. Structural fire design
EN 1997-1:2004 Eurocode 7. Geotechnical design. General rules
EN 1998-1:2004 Eurocode 8. Design of structures for earthquake resistance. General rules, seismic actions and rules for buildings
EN 1998-5:2004 Eurocode 8. Design of structures for earthquake resistance. Foundations, retaining structures and geotechnical aspects
EN 2:1992 Classification of fires
EN 200:1992 Sanitary tapware. General technical specifications for single taps and mixer taps (nominal size 1/2) PN 10. Minimum flow pressure of 0.05 MPa (0.5 bar)
EN 2000:1992 Quality assurance. EN aerospace products. Approval of the quality system of manufacturers
EN 2004-1:1993 Test methods for aluminium and aluminium alloy products. Determination of electrical conductivity of wrought aluminium alloys
EN 2004-5:1993 Test methods for aluminium and aluminium alloy products. Determination of cladding thickness and copper diffusion of clad semi-finished products
EN 2009:1992 Bearings. Airframe rolling rigid, single row ball bearings in steel diameter series 8 and 9. Dimensions and loads
EN 20-1:1992 Wood preservatives. Determination of the protective effectiveness against $7ILyctus brunneus$7R (Stephens). Application by surface treatment (laboratory method)
EN 201:1997 Rubber and plastics machines. Injection moulding machines. Safety requirements
EN 20105-A02:1994 Textiles. Tests for colour fastness. Grey scale for assessing change in colour (including half-steps)
EN 20105-A02:1995 Textiles. Tests for colour fastness. Grey scale for assessing change in colour
EN 20105-A03:1994 Textiles. Tests for colour fastness. Grey scale for assessing staining (including half-steps)
EN 20105-A03:1995 Textiles. Tests for colour fastness. Grey scale for assessing staining
EN 20105-C01:1992 Textiles. Tests for colour fastness. Colour fastness to washing: Test 1
EN 20105-C02:1993 Textiles. Tests for colour fastness. Colour fastness to washing: Test 2
EN 20105-C03:1993 Textiles. Tests for colour fastness. Colour fastness to washing: Test 3
EN 20105-C04:1993 Textiles. Tests for colour fastness. Colour fastness to washing: Test 4
EN 20105-C05:1993 Textiles. Tests for colour fastness. Colour fastness to washing: Test 5
EN 20105-N01:1995 Textiles. Tests for colour fastness. Colour fastness to bleaching: hypochlorite
EN 2011:1989 Specification for bearings - airframe rolling rigid single row ball bearings in corrosion resisting steel diameter series 8 and 9. Dimensions and loads
EN 2012:1989 Specification for bearings - airframe rolling rigid, single row ball bearings in steel diameter series 0 and 2. Dimensions and loads
EN 2014:1989 Specification for bearings - airframe rolling rigid single row ball bearings in corrosion resisting steel diameter series 0 and 2. Dimensions and loads
EN 20140-10:1992 Acoustics. Measurement of sound insulation in buildings and of building elements. Laboratory measurement of airborne sound insulation of small building elements





To receive a price quote for any EN standard, please review our partners on the right


Return To The EN Standards Glossary Index






HOW TO OBTAIN STANDARDS 
To receive a direct quote for any EN standard, please review our partners below.

OTHER INFORMATION





Copyright StandardsDirect. European Standards.