EN 20140-2:1993 -
The StandardsDirect Glossary of European / EN Standards
THE EN STANDARDS GLOSSARY
en standards, European standards
Glossary of BC, ISO, and EN Standards

EN 20140-2:1993 Onwards

Standard No Title of Standard
EN 20140-2:1993 Determination, verification and application of precision data
EN 20140-9:1994 Acoustics. Measurement of sound insulation in buildings and of building elements.
EN 2015:1989 Specification for bearings - airframe rolling double row, self aligning ball bearings in steel diameter series 2. Dimensions and loads
EN 2017:1989 Specification for bearings - airframe rolling double row self aligning ball bearings in corrosion resisting steel diameter series 2. Dimensions and loads
EN 2018:1989 Specification for bearings - airframe rolling single row, self aligning roller bearings in steel diameter series 3 and 4. Dimensions and loads
EN 20187:1993 Paper, board and pulps. Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
EN 20-2:1993 Wood preservatives. Determination of the protective effectiveness against $7ILyctus brunneus$7R (Stephens). Application by impregnation (laboratory method)
EN 2020:1989 Specification for bearings - airframe rolling single row self aligning roller bearings in corrosion resisting steel diameter series 3 and 4. Dimensions and loads
EN 2022:1990 Specification for bearings, spherical plain in corrosion resisting steel with self-lubricating liner. Light series. Dimensions and loads
EN 20225:1992 Fasteners. Bolts, screws, studs and nuts. Symbols and designations of dimensions
EN 2023:1989 Specification for bearings - spherical plain in corrosion resisting steel with self-lubricating liner. Normal series. Dimensions and loads
EN 20273:1992 Fasteners. Clearance holes for bolts and screws
EN 20286-1:1993 ISO system of limits and fits. ISO system of limits and fits. Bases of tolerances, deviations and fits
EN 20286-2:1993 ISO system of limits and fits. ISO system of limits and fits. Tables of standard tolerance grades and limit deviations for holes and shafts
EN 20287:1994 Paper and board. Determination of moisture content. Oven-drying method
EN 203-1:1993 Specification for gas heated catering equipment. Safety requirements
EN 203-2:1995 Specification for gas heated catering equipment. Rational use of energy
EN 2032-1:2002 Metallic materials. Conventional designation
EN 2032-2:1994 Metallic materials. Coding of metallurgical condition in delivery condition
EN 204:2001 Classification of thermoplastic wood adhesives for non-structural applications
EN 2044:2001 Aerospace series. Round bars, drawn, in aluminium and aluminium alloys. Tolerance class h 11. Diameter 4 mm $3L D $3L 63 mm. Dimensions
EN 2045:2001 Aerospace series. Square bars, drawn, in aluminium and aluminium alloys. Tolerance class h 11. Thickness 6 mm $3L a $3L 50 mm. Dimensions
EN 2046:2001 Hexagonal bars, drawn, in aluminium and aluminium alloys. Tolerance class h 11. Width across flats 7 mm $3L a $3L 50 mm. Dimensions
EN 2047:2001 Aerospace series. Beaded L-section extruded, in aluminium and aluminium alloys. Dimensions
EN 2048:2001 Aerospace series. Extruded L-section in aluminium alloys. Dimensions
EN 2049:2001 Aerospace series. Extruded channel section, in aluminium alloys. Dimensions
EN 205:2003 Adhesives. Wood adhesives for non-structural applications. Determination of tensile shear strength of lap joints
EN 2050:2001 Aerospace series. Extruded T-section, in aluminium alloys. Dimensions
EN 20535:1994 Paper and board. Determination of water absorptiveness. Cobb method
EN 20594-1:1994 Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment. General requirements
EN 206-1:2000 Concrete. Specification, performance, production and conformity
EN 2063:1992 Airframe rolling bearings. Technical specification
EN 20638:1993 Method for determination of dry-matter content of pulps
EN 2064:1992 Bearings, spherical plain in corrosion resisting steel with self lubricating liner. Technical specification
EN 2066:2002 Aerospace series. Extruded section in aluminium alloys. General tolerances
EN 2067:1996 Rod ends with self-aligning ball bearings. Technical specification
EN 2068:1996 Rod ends with self-lubricating self-aligning bearings. Technical specification
EN 20693:1992 Dimensions of seam welding wheel blanks
EN 207:1999 Personal eye-protection. Filters and eye-protectors against laser radiation (laser eye-protectors)
EN 2070-1:1991 Specification for aluminium and aluminium alloy wrought products. Technical specification. General requirements
EN 2070-2:1991 Specification for aluminium and aluminium alloy wrought products. Technical specification. Sheet, strip formed profiles and plate
EN 2070-3:1991 Specification for aluminium and aluminium alloy wrought products. Technical specification. Bar and section
EN 2070-4:1991 Specification for aluminium and aluminium alloy wrought products. Technical specification. Tube for structures
EN 2070-5:1991 Specification for aluminium and aluminium alloy wrought products. Technical specification. Tube used under pressure
EN 2070-6:1991 Specification for aluminium and aluminium alloy wrought products. Technical specification. Rivet wire
EN 2070-7:1991 Specification for aluminium and aluminium alloy wrought products. Technical specification. Wrought forging stock
EN 2071:2002 Aerospace series. Sheets in aluminium and aluminium alloys. Thickness 0,25 mm $3L a $3L 6 mm. Dimensions
EN 2072:1994 Aluminium alloy AL-P1050A-H14. Sheet and strip 0,4 mm $3L a $3L 6 mm
EN 2076-1:1991 Aluminium and magnesium alloy ingots and castings. Technical specification. General requirements
EN 2076-2:1991 Aluminium and magnesium alloy ingots and castings. Technical specification. Ingots for remelting
EN 2076-3:1991 Aluminium and magnesium alloy ingots and castings. Technical specification. Pre-production and production castings
EN 2078:2002 Aerospace series. Metallic materials. Manufacturing schedule, inspection schedule, inspection and test report. Definition, general principles, preparation and approval
EN 2079:1995 Bearings, precision ball with flange in corrosion resisting steel, for instruments and equipment. Dimensions and loads
EN 208:1999 Personal eye-protection. Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)
EN 20811:1992 Textiles. Determination of resistance to water penetration. Hydrostatic pressure test
EN 2082-1:1991 Specification for aluminium alloy forging stock and forgings. Technical specification. General requirements
EN 2082-2:1991 Specification for aluminium alloy forging stock and forgings. Technical specification. Forging stock
EN 2082-3:1991 Specification for aluminium alloy forging stock and forgings. Technical specification. Pre-production and production forgings
EN 2083:2001 Aerospace series. Copper and copper alloy conductors for electrical cables. Product standard
EN 2085:2004 Aerospace series. Aluminium alloy AL-P2618A-T6. Hand and die forgings. a $3L 150 mm
EN 2086:2004 Aerospace series. Aluminium alloy AL-P2618A-T851. Hand and die forgings. a $3L 150 mm
EN 20865:1992 Slots in platens for projection welding machines
EN 2089:1994 Aluminium alloy AL-P2014A-T6 or T62. Sheet and strip 0,4 mm $3L a $3L 6 mm
EN 20898-2:1994 Mechanical properties of fasteners. Nuts with specified proof load values. Coarse thread
EN 20898-7:1995 Mechanical properties of fasteners. Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
EN 209:2000 Steel drums. Removable head (open head) drums with a minimum total capacity of 210 l
EN 2092:1994 Aluminium alloy AL-P7075-T6 or T62. Clad sheet and strip 0,4 mm $3L a $3L 6 mm
EN 2093:1992 Aluminium alloy AL-P7009-T74. Hand forgings 20 mm $3L a $3L 150 mm
EN 2094:1992 Aluminium alloy AL-P7009-T74. Die forgings 3 mm $3L a $3L 150 mm
EN 210:2000 Steel drums. Non-removable head (tight head) drums with a minimum total capacity of 216,5 l
EN 2100:1992 Aluminium alloy AL-P2014A-T4511. Extruded bars and sections a or D $3L 200 mm
EN 2101:1991 Specification for chromic acid anodizing of aluminium and wrought aluminium alloys
EN 2103-1:1992 Steel, nickel base and cobalt base alloy remelting stock and castings. Technical specification. General requirements
EN 2103-2:1991 Steel, nickel base and cobalt base alloy remelting stock and castings. Technical specification. Remelting stock
EN 2103-3:1992 Steel, nickel base and cobalt base alloy remelting stock and castings. Technical specification. Pre-production and production castings
EN 2104:1996 Acrylonitrile-butadiene rubber (NBR). Hardness 40 IRHD
EN 21089:1992 Electrode taper fits for spot welding equipment. Dimensions
EN 212:2003 Wood preservatives. General guidance on sampling and preparation for analysis of wood preservatives and treated timber
EN 2122:1996 Washers, flat, in aluminium alloy, anodized or chromated
EN 2126:1992 Aluminium alloy AL-P7075-T651. Plate 6 mm $0L a $3L 80 mm
EN 2127:1992 Aluminium alloy AL-P7075-T73511. Extruded bars and sections a or D $3L 100 mm
EN 2128:1992 Aluminium alloy AL-P7075-T7351. Drawn bars 6 mm $3L a or D $3L 75 mm
EN 2130:2001 Aerospace Series. Bearings, precision ball in corrosion resisting steel for instruments and equipment. Technical specification
EN 2131:2002 Aerospace series. Plates in aluminium alloys. Thickness 6 mm $0L a $3L 160 mm. Dimensions
EN 2133:1998 Cadmium plating of steels with specified tensile strength $3L 1450 MPa, copper, copper alloys and nickel alloys
EN 2134:2002 Aerospace series. Round bars, extruded in aluminium and aluminium alloys. Diameter 10 mm $3L D $3L 220 mm. Dimensions
EN 2138:2000 Washers, flat, in steel, cadmium plated
EN 2139:1990 Specification for washers, flat heat resisting steel
EN 2143:1993 Rivets, solid, universal head, in aluminium 1050A, inch based series
EN 2144:1993 Rivets, solid, universal head, in aluminium alloy 2117, inch based series
EN 2145:1993 Rivets, solid, universal head, in aluminium alloy 2117, anodized or chromated, inch based series
EN 2146:1993 Rivets, solid, universal head, in aluminium alloy 2017A, inch based series
EN 2148:1993 Rivets, solid, universal head, in aluminium alloy 5056A, inch based series
EN 2149:1996 Rivets, solid, universal head, in aluminium alloy 5056A, anodized or chromated, inch based series
EN 215:2004 Thermostatic radiator valves. Requirements and test methods
EN 2155-12:1997 Specification for test methods for transparent materials for aircraft glazing. Determination of linear thermal expansion
EN 2155-13:1993 Test methods for transparent materials for aircraft glazing. Determination of temperature at deflection under load
EN 2155-14:1993 Test methods for transparent materials for aircraft glazing. Determination of the 1/10 Vicat softening temperature
EN 2155-19:1997 Specification for test methods for transparent materials for aircraft glazing. Determination of craze resistance
EN 2155-2:1993 Specification for test methods for transparent materials for aircraft glazing. Determination of water absorption
EN 2155-21:1989 Specification for test methods for transparent materials for aircraft glazing. Determination of resistance to crack propagation (K factor)
EN 2155-3:1993 Specification for test methods for transparent materials for aircraft glazing. Determination of refractive index
EN 2155-5:1989 Specification for test methods for transparent materials for aircraft glazing. Determination of visible light transmission
EN 2155-7:1997 Specification for test methods for transparent materials for aircraft glazing. Determination of optical deviation
EN 2155-8:1989 Specification for test methods for transparent materials for aircraft glazing. Determination of optical distortion
EN 2155-9:1989 Specification for test methods for transparent materials for aircraft glazing. Determination of haze
EN 2157-1:1993 Steel. Forging stock and forgings. Technical specifications. General requirements
EN 2157-2:1993 Steel. Forging stock and forgings. Technical specifications. Forging stock
EN 2157-3:1993 Steel. Forging stock and forgings. Technical specifications. Pre-production and production forgings
EN 21683:1994 Acoustics. Preferred reference quantities for acoustic levels
EN 21864:1994 Information technology. Unrecorded 12,7 mm (0,5 in) wide magnetic tape for information interchange. 32 ftpmm (800 ftpi) NRZ1, 126 ftpmm (3 200 ftpi) phase encoded and 356 ftpmm NRZ1
EN 21942-1:1992 Dental vocabulary. General and clinical terms
EN 21942-2:1993 Dental vocabulary. Dental materials
EN 21942-3:1994 Dental vocabulary. Dental instruments
EN 21942-4:1994 Dental vocabulary. Dental equipment





To receive a price quote for any EN standard, please review our partners on the right


Return To The EN Standards Glossary Index






HOW TO OBTAIN STANDARDS 
To receive a direct quote for any EN standard, please review our partners below.

OTHER INFORMATION





Copyright StandardsDirect. European Standards.