EN 21974:1994 -
The StandardsDirect Glossary of European / EN Standards
THE EN STANDARDS GLOSSARY
en standards, European standards
Glossary of BC, ISO, and EN Standards

EN 21974:1994 Onwards

Standard No Title of Standard
EN 21974:1994 Paper. Determination of tearing resistance (Elmendorf method)
EN 22063:1994 Metallic and other inorganic coatings. Thermal spraying. Zinc, aluminium and their alloys
EN 22206:1993 Complete, filled transport packages. Method for identifying parts when testing
EN 22248:1993 Complete, filled transport packages. Method for determination of resistance to vertical impact by dropping
EN 22313:1992 Textile fabrics. Determination of the recovery from creasing of a horizontally folded specimen by measuring the angle of recovery
EN 22339:1992 Taper pins, unhardened
EN 22340:1992 Clevis pins without head
EN 22341:1992 Clevis pins with head
EN 2236:1992 Pins, headed, close tolerance shank, in alloy steel. Technical specification
EN 22401:1994 Covered electrodes. Determination of the efficiency, metal recovery and deposition coefficient
EN 2243-2:1991 Structural adhesives. Test methods. Peel metal-metal
EN 2243-3:1992 Structural adhesives. Test methods. Peeling test metal-honeycomb core
EN 2243-4:1991 Structural adhesives. Test methods. Metal-honeycomb core flatwise tensile test
EN 2243-5:1992 Test methods for structural adhesives. Ageing tests
EN 22553:1995 Welded, brazed and soldered joints. Symbolic representation on drawings
EN 2256:2004 Aerospace series. Aluminium alloy AL-P2618A-T852. Hand and die forgings. a $3L 150 mm
EN 2257:1997 Circular tubes for structures in aluminium and aluminium alloys. Diameter 6 mm $3L $iD $3L 100 mm. Thickness 1 mm $3L $ia $3L 6 mm. Dimensions
EN 2258:1997 Circular tubes for fluids in aluminium and aluminium alloys. Diameter 3,2 mm $3L $iD $3L 100 mm. Thickness 0,6 mm $3L $ia $3L 2,5 mm. Dimensions
EN 2259:1995 Silicone rubber (VMQ). Hardness 50 IRHD
EN 2260:1995 Silicone rubber (VMQ). Hardness 60 IRHD
EN 2261:1995 Silicone rubber (VMQ). Hardness 70 IRHD
EN 2262:1995 Silicone rubber (VMQ/PVMQ) with high tear strength. Hardness 50 IRHD
EN 2264:1996 Nuts, anchor, self-locking, floating, two lug, incremental counterbore, in alloy steel, cadmium plated MoS$d2 lubricated. Classification: 900 MPa (at ambient temperature) /235$0DC
EN 22768-1:1993 General tolerances. Tolerances for linear and angular dimensions without individual tolerance indications
EN 22768-2:1993 General tolerances. Geometrical tolerances for features without individual tolerance indications
EN 228:2004 Automotive fuels. Unleaded petrol. Requirements and test methods
EN 2282:1992 Characteristics of aircraft electrical supplies
EN 2283:1996 Testing of aircraft wiring
EN 2284:1991 Specification for sulfuric acid anodizing of aluminium and wrought aluminium alloys
EN 2285:1990 Specification for bushes plain, aluminium alloy with self-lubricating liner. Dimensions and loads
EN 22858:1993 End-suction centrifugal pumps (rating 16 bar). Designation, nominal duty point and dimensions
EN 2286:1990 Specification for bushes flanged, aluminium alloy with self-lubricating liner. Dimensions and loads
EN 2287:1990 Specification for bushes plain, corrosion resisting steel with self-lubricating liner. Dimensions and loads
EN 22872:1993 Complete, filled transport packages. Method for determination of resistance to compression
EN 22874:1993 Complete, filled transport packages. Method of test for stacking using compression tester
EN 22876:1993 Complete, filled transport packages. Method for determination of resistance to damage by rolling
EN 2288:1990 Specification for bushes flanged, corrosion resisting steel with self-lubricating liner. Dimensions and loads
EN 2289:1996 Rod bodies in aluminium alloy for flight controls. Technical specification
EN 2290-1:1998 Rod bodies, flight control in aluminium alloy, for adjustable end fittings. Dimensions and loads
EN 230:1991 Specification for monobloc oil burners. Safety, control and regulation devices and safety times
EN 230:2005 Automatic burner control systems for oil burners
EN 23015:1994 Petroleum products. Determination of cloud point
EN 23035:1994 Single-faced and single-wall corrugated fibreboard. Determination of flat crush resistance
EN 2309:1990 Specification for hole sizes for solid rivets
EN 2310:1991 Test methods for the flame resistance rating of non-metallic materials
EN 2311:1990 Specification for bushes with self-lubricating liner. Technical specification
EN 2318:1992 Aluminium alloy AL-P2024-T3511. Extruded bars and sections 1,2 mm $3L a or D $3L 150 mm
EN 232:2003 Baths. Connecting dimensions
EN 2326:1992 Aluminium alloy AL-P6082-T6. Extruded bars and sections a or D $3L 200 mm
EN 2327:1989 Specification for washers, lock with radial serrations in alloy steel. Dimensions
EN 23270:1991 Specification for temperatures and humidities for conditioning and testing paints, varnishes and their raw materials
EN 2328:1990 Specification for washers, tab for flight control rods. Dimensions
EN 2329:1993 Textile glass fibre preimpregnates. Test method for the determination of mass per unit area
EN 233:1999 Wallcoverings in roll form. Specification for finished wallpapers, wall vinyls and plastics wallcoverings
EN 2330:1993 Textile glass fibre preimpregnates. Test method for the determination of the content of volatile matter
EN 2331:1993 Textile glass fibre preimpregnates. Test method for the determination of the resin and fibre content and mass of fibre per unit area
EN 23312:1993 Sintered metal materials and hardmetals. Determination of Young modulus
EN 2332:1993 Textile glass fibre preimpregnates. Test method for the determination of the resin flow
EN 23326:1993 Specification for hardmetals. Determination of (the magnetization) coercivity
EN 23327:1993 Hardmetals. Determination of transverse rupture strength
EN 2334:1997 Chromic-sulphuric acid pickle of aluminium and aluminium alloys
EN 2335:1990 Specification for bearings-spherical plain in corrosion resisting steel without assembly slot. Dimensions and loads
EN 2336:1990 Specification for bearings-spherical plain in steel with assembly slots. Dimensions and loads
EN 23369:1993 Impermeable sintered metal materials and hardmetals. Determination of density
EN 2337:1996 Spherical plain bearings. Technical specification
EN 2338:2001 Aerospace series. Sheets, hot rolled in titanium and titanium alloys. Thickness 0,8 mm $3L a $3L 6 mm. Dimensions
EN 2339:2001 Aerospace series. Sheets, cold rolled in titanium and titanium alloys. Thickness 0,2 mm $3L a $3L 6 mm. Dimensions
EN 234:1997 Wallcoverings in roll form. Specification for wallcoverings for subsequent decoration
EN 2344:2001 Aerospace series. Round bars, machined in heat resisting alloys. Diameter 10 mm $0L D $0L 180 mm. Dimensions
EN 2348:1989 Specification for control cable assemblies. Technical specification
EN 235:2002 Wallcoverings. Vocabulary and symbols
EN 2350:1991 Circuit breakers. Technical specification
EN 2353:1989 Specification for turnbarrels, control cable in corrosion resisting steel. Dimensions and loads
EN 2354:1989 Specification for eye-ends, threaded, control cable in corrosion resisting steel. Dimensions and loads
EN 2355:1989 Specification for fork-ends, threaded, control cable in corrosion resisting steel. Dimensions and loads
EN 2356:1989 Specification for fork-ends threaded, control cable for rolling bearings in corrosion resisting steel. Dimensions and loads
EN 2357:1989 Specification for stud-ends in corrosion resisting steel swaged on type, control cable. Dimensions and loads
EN 2358:1989 Specification for eye-ends in corrosion resisting steel swaged on type, control cable. Dimensions and loads
EN 2359:1989 Specification for fork-ends in corrosion resisting steel swaged on type, control cable. Dimensions and loads
EN 2360:1989 Specification for fork-ends for rolling bearings in corrosion resisting steel swaged on type, control cable. Dimensions and loads
EN 2361:1989 Specification for ball-ends, double shank in corrosion resisting steel swaged on type, control cable. Dimensions and loads
EN 2362:1989 Specification for ball-ends in corrosion resisting steel swaged on type, control cable. Dimensions and loads
EN 2363:1989 Specification for locking clips for turnbuckles of control cables. Dimensions
EN 2364:1989 Specification for pins, shear headed, close tolerance
EN 2365:1989 Specification for collars, aluminium alloy
EN 23661:1993 End-suction centrifugal pumps. Baseplate and installation dimensions
EN 2367:1990 Specification for split pins in steel EN 2573
EN 237:1996 Methods of test for petroleum and its products. Liquid petroleum products. Petrol. Determination of low lead concentrations by atomic absorption spectrometry
EN 2374:1991 Specification for glass fibre reinforcing mouldings and sandwich composites. Production of test panels
EN 2375:1992 Resin preimpregnated materials. Production batch sampling procedure
EN 23758:1994 Textiles. Care labelling code using symbols
EN 2377:1989 Specification for glass fibre reinforced plastics. Test method. Determination of apparent interlaminar shear strength
EN 2378:1994 Fibre reinforced plastics. Determination of water absorption by immersion
EN 238:1996 Methods of test for petroleum and its products. Liquid petroleum products. Petrol. Determination of the benzene content by infrared spectrometry
EN 2381:1992 Aluminium alloy AL-P7009-T7452. Hand forgings 40 mm $3L a $3L 150 mm
EN 2384:1992 Aluminium alloy AL-P2014A-T6511. Extruded bars and sections a or D $3L 150 mm
EN 2385:1992 Aluminium alloy AL-P7009-T74511. Extruded bars and sections a or D $3L 125 mm
EN 23878:1993 Hardmetals. Vickers hardness test
EN 23907:1993 Hardmetals. Determination of total carbon content. Gravimetric method
EN 23908:1993 Hardmetals. Determination of insoluble (free) carbon content. Gravimetric method
EN 23909:1994 Hardmetals. Determination of cobalt. Potentiometric method
EN 23923-1:1993 Metallic powders. Determination of apparent density. Funnel method
EN 23923-2:1993 Metallic powders. Determination of apparent density. Scott volumeter method
EN 2395:1994 Aluminium alloy AL-P2014A-T4 or T42. Sheet and strip 0,4 mm $3L a $3L 6 mm
EN 23954:1993 Powders for powder metallurgical purposes. Sampling
EN 23995:1993 Specification for metallic powders. Determination of green strength by transverse rupture of rectangular compacts
EN 24003:1993 Permeable sintered metal materials. Determination of bubble test pore size
EN 24006:1993 Measurement of fluid flow in closed conduits. Vocabulary and symbols
EN 24015:1992 Hexagon head bolts. Product grade B. Reduced shank (shank diameter pitch diameter)
EN 241:2000 Methods of test for petroleum and its products. Liquid petroleum products. Determination of sodium content. Atomic absorption spectrometric method
EN 2413:1995 Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature)/235$0DC
EN 24178:1993 Specification for information to be recorded in distribution trials involving complete, filled transport packages
EN 24180-1:1993 Guide to compilation of performance test schedules for complete, filled transport packages. General principles
EN 24180-2:1993 Guide to compilation of performance test schedules for complete, filled transport packages. Quantitative data
EN 24185:1993 Measurement of fluid flow in closed conduits. Weighing method





To receive a price quote for any EN standard, please review our partners on the right


Return To The EN Standards Glossary Index






HOW TO OBTAIN STANDARDS 
To receive a direct quote for any EN standard, please review our partners below.

OTHER INFORMATION





Copyright StandardsDirect. European Standards.