EN 2424:1995 -
The StandardsDirect Glossary of European / EN Standards
THE EN STANDARDS GLOSSARY
en standards, European standards
Glossary of BC, ISO, and EN Standards

EN 2424:1995 Onwards

Standard No Title of Standard
EN 2424:1995 Marking of aerospace products
EN 24260:1994 Methods of test for petroleum and its products. Petroleum products and hydrocarbons. Determination of sulfur content. Wickbold combustion method
EN 2428:1995 Ethylene-propylene rubber (EPM/EPDM). Hardness 50 IRHD
EN 2429:1995 Ethylene-propylene rubber (EPM/EPDM). Hardness 60 IRHD
EN 2430:1995 Ethylene-propylene rubber (EPM/EPDM). Hardness 70 IRHD
EN 2431:1995 Ethylene-propylene rubber (EPM/EPDM). Hardness 80 IRHD
EN 2432:1995 Ethylene-propylene rubber (EPM/EPDM). Hardness 90 IRHD
EN 2437:2002 Aerospace series. Chromate conversion coatings (yellow) for aluminium and aluminium alloys
EN 24489:1993 Sintered hardmetals. Sampling and testing
EN 24491-1:1993 Metallic powders. Determination of oxygen content by reduction methods. General guidelines
EN 24491-4:1993 Metallic powders. Determination of oxygen content by reduction methods. Total oxygen by reduction-extraction
EN 24492:1993 Metallic powders, excluding powders for hardmetals. Determination of dimensional changes associated with compacting and sintering
EN 24496:1993 Metallic powders. Determination of acid insoluble content in iron, copper, tin and bronze powders
EN 24497:1993 Metallic powders. Determination of particle size by dry sieving
EN 24498-1:1993 Sintered metal materials, exluding hardmetals. Determination of apparent hardness. Materials of essentially uniform section hardness
EN 24499:1993 Specification for hardmetals. Metallographic determination of microstructure
EN 24501:1994 Hardmetals. Determination of titanium. Photometric peroxide method
EN 24503:1993 Hardmetals. Determination of contents of metallic elements by X-ray fluorescence. Fusion method
EN 24505:1993 Specification for hardmetals. Metallographic determination of porosity and uncombined carbon
EN 24506:1993 Specification for hardmetals. Compression test
EN 246:2003 Sanitary tapware. General specifications for flow rate regulators
EN 24641:1993 Rubber hoses for water suction and discharge. Specification
EN 247:1997 Heat exchangers. Terminology
EN 24766:1992 Slotted set screws with flat point
EN 248:2002 Sanitary tapware. General specification for electrodeposited coatings of Ni-Cr
EN 2484:1989 Specification for microfilming of drawings. Aperture card for 35 mm microfilm
EN 24869-1:1993 Acoustics. Hearing protectors. Sound attenuation of hearing protectors. Subjective method of measurement
EN 24869-3:1994 Acoustics. Hearing protectors. Simplified method for the measurement of insertion loss of ear-muff type protectors for quality inspection purposes
EN 24883:1993 Specification for hardmetals. Determination of contents of metallic elements by X-ray fluorescence. Solution method
EN 24884:1993 Hardmetals. Sampling and testing of powders using sintered test pieces
EN 2489:1995 Fibre reinforced plastics. Determination of the action of test fluids
EN 2491:1997 Molybdenum disulphide dry lubricants. Coating methods
EN 24920:1992 Textiles. Determination of resistance to surface wetting (spray test) of fabrics
EN 24937:1991 Steel and iron. Determination of chromium content. Potentiometric or visual titration method
EN 2495:1991 Specification for single-pole circuit breakers, temperature compensated, rated currents up to 25 A. Product standard
EN 2497:1990 Specification for dry abrasive blasting of titanium and titanium alloys
EN 2498:1990 Specification for rod ends, adjustable self-aligning plain bearing, with self-lubricating liner and threaded shank. Dimensions and loads
EN 2499:1990 Specification for computer output microfiche (com) A6 microfiche
EN 250:2000 Respiratory equipment. Open-circuit self-contained compressed air diving apparatus. Requirements, testing, marking
EN 2501:1992 Bearings, spherical plain in corrosion resisting steel with self-lubricating liner and wide inner ring. Dimensions and loads
EN 25077:1994 Textiles. Determination of dimensional change in washing and drying
EN 251:2003 Shower trays. Connecting dimensions
EN 2515:1990 Specification for rod ends, adjustable single fork and threaded shank. Dimensions and loads
EN 2516:1997 Passivation of corrosion resisting steels and decontamination of nickel base alloys
EN 25163:1994 Methods of test for petroleum and its products. Motor and aviation-type fuels. Determination of knock characteristics. Motor method
EN 25164:1994 Methods of test for petroleum and its products. Motor fuels. Determination of knock characteristics. Research method
EN 25184:1995 Straight resistance spot welding electrodes
EN 25264-3:1994 Pulps. Laboratory beating. Jokro mill method
EN 253:2003 District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks.
EN 2536:1995 Hard anodizing of aluminium alloys
EN 2544:1990 Specification for representation of rivets on drawings for aerospace equipment
EN 2545-1:1995 Titanium and titanium alloy remelting stock and castings. Technical specification. General requirements
EN 2545-2:1995 Titanium and titanium alloy remeling stock and castings. Technical specification. Remelting stock
EN 2545-3:1995 Titanium and titanium alloy remelting stock and castings. Technical specification. Pre-production and production castings
EN 2546:1990 Specification for washers, lock with radial serrations in corrosion resisting steel. Dimensions
EN 2547:1989 Specification for filming of documents. Microfilm 105 mm (Microfiche A6)
EN 2549:1995 Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS$d2 lubricated. Classification: 1100 MPa (at ambient temperature)/315$0DC
EN 2550:1993 Rivets, solid 100$0D normal countersunk head, in aluminium 1050A, inch based series
EN 2551:1993 Rivets, solid, 100$0D normal countersunk head with dome, in aluminium alloy 2117, inch based series
EN 2552:1993 Rivets, solid, 100$0D normal countersunk head with dome, in aluminium alloy 2117, anodized or chromated, inch based series
EN 2553:1993 Rivets, solid, 100$0D normal countersunk head with dome, in aluminium alloy 2017A, inch based series
EN 255-3:1997 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors. Heating mode. Testing and requirements for marking for sanitary hot water units
EN 2555:1993 Rivets, solid, 100$0D normal countersunk head with dome, in aluminium alloy 5056A, inch based series
EN 2556:1993 Rivets, solid, 100$0D normal countersunk head with dome, in aluminium alloy 5056A, anodized or chromated, inch based series
EN 2557:1997 Carbon fibre preimpregnates. Determination of mass per unit area
EN 2558:1997 Carbon fibre preimpregnates. Determination of the volatile content
EN 25580:1992 Specification for minimum requirements for industrial radiographic illuminators for non-destructive testing
EN 2559:1997 Carbon fibre preimpregnates. Determination of the resin and fibre content and the mass of fibre per unit area
EN 2560:1998 Carbon fibre preimpregnates. Determination of the resin flow
EN 2561:1995 Carbon fibre reinforced plastics. Undirectional laminates. Tensile test parallel to the fibre direction
EN 2562:1997 Carbon fibre reinforced plastics. Unidirectional laminates. Flexural test parallel to the fibre direction
EN 2563:1997 Carbon fibre reinforced plastics. Unidirectional laminates. Determination of the apparent interlaminar shear strength
EN 2564:1998 Carbon fibre laminates. Determination of the fibre, resin and void contents
EN 25651:1993 Specification for units for expressing properties of paper, board and pulps
EN 25663:1993 Water quality. Determination of Kjeldahl nitrogen. Method after mineralization with selenium
EN 25667-1:1994 Water quality. Sampling. Guidance on the design of sampling programmes
EN 25667-2:1993 Water quality. Sampling. Guidance on sampling techniques
EN 2569:1991 Control cable fittings and turnbarrels. Technical specification
EN 257:1992 Mechanical thermostats for gas-burning appliances
EN 2570:1996 Nickel-cadmium batteries. Technical specification
EN 2574:1990 Specification for welds. Information on drawings
EN 2575:1989 Specification for filming of documents. 16 mm microfilm
EN 25754:1993 Sintered metal materials, excluding hardmetals. Unnotched impact test piece
EN 25813:1993 Water quality. Determination of dissolved oxygen. Iodometric method
EN 25814:1992 Method for determination of dissolved oxygen in water: electrochemical probe method
EN 25821:1992 Resistance spot welding electrode caps
EN 25822:1992 Spot welding equipment. Taper plug gauges and taper ring gauges
EN 25827:1992 Specification for spot welding. Electrode back-ups and clamps
EN 2583:1997 Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification: 1275 MPa (at ambient temperature)/650$0DC. Technical specification
EN 2584:2001 Aerospace series. Bearings, spherical plain in corrosion resisting steel with self-lubricating liner. Narrow series. Elevated load at ambient temperature. Dimensions and loads
EN 2585:2001 Aerospace series. Bearings, spherical plain in corrosion-resisting steel with self-lubricating liner. Elevated load at ambient temperature. Dimensions and loads
EN 2586:1991 Specification for washers, lock for flight control rods. Dimensions
EN 2587:1990 Specification for rod ends, adjustable double fork and threaded shank. Dimensions and loads
EN 2588:1992 Bearings. Spherical plain in corrosion resisting steel with assembly slots. Dimensions and loads
EN 2591:1992 Elements of electrical and optical connection. Test methods. General
EN 259-1:2001 Wallcoverings in roll form. Heavy duty wallcoverings. Specifications
EN 2591-101:1994 Elements of electrical and optical connection. Test methods. Visual examination
EN 2591-102:1996 Elements of electrical and optical connection. Test methods. Examination of dimensions and mass
EN 2591-201:1996 Elements of electrical and optical connection. Test methods. Contact resistance. Low level
EN 2591-202:1996 Elements of electrical and optical connection. Test methods. Contact resistance at rated current
EN 2591-203:1996 Elements of electrical and optical connection. Test methods. Electrical continuity at microvolt level
EN 2591-204:1996 Elements of electrical and optical connection. Test methods. Discontinuity of contacts in the microsecond range
EN 2591-205:1996 Elements of electrical and optical connection. Test methods. Housing (shell) electrical continuity
EN 2591-206:1996 Elements of electrical and optical connection. Test methods. Measurements of insulation resistance
EN 2591-207:1996 Elements of electrical and optical connection. Test methods. Voltage proof test
EN 2591-208:1996 Elements of electrical and optical connection. Test methods. Temperature rise due to rated current
EN 2591-209:1996 Elements of electrical and optical connection. Test methods. Current temperature derating
EN 2591-210:1998 Elements of electrical and optical connection. Test methods. Electrical overload
EN 2591-211:2002 Elements of electrical and optical connection. Test methods. Capacitance
EN 2591-213:1998 Elements of electrical and optical connection. Test methods. Shielding effectiveness from 100 MHz to 1 GHz
EN 2591-216:1998 Elements of electrical and optical connection. Test methods. Engagement depth of contacts
EN 2591-217:2002 Elements of electrical and optical connection. Test methods. Voltage drop under specified current for terminal lugs and in-line splices
EN 2591-218:2002 Elements of electrical and optical connection. Test methods. Ageing of terminal lugs and in-line splices by temperature and current cycling
EN 2591-219:2002 Elements of electrical and optical connection. Test methods. Voltage strength for insulated terminal lugs and in-line splices
EN 2591-301:1996 Elements of electrical and optical connection. Test methods. Endurance at temperature





To receive a price quote for any EN standard, please review our partners on the right


Return To The EN Standards Glossary Index






HOW TO OBTAIN STANDARDS 
To receive a direct quote for any EN standard, please review our partners below.

OTHER INFORMATION





Copyright StandardsDirect. European Standards.