EN 26:1998 -
The StandardsDirect Glossary of European / EN Standards
THE EN STANDARDS GLOSSARY
en standards, European standards
Glossary of BC, ISO, and EN Standards

EN 26:1998 Onwards

Standard No Title of Standard
EN 26:1998 Gas-fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners
EN 2601:1996 Fork ends, adjustable. Technical specification
EN 2609:1989 Specification for turnbarrels, control cable in copper-zinc alloys. Dimensions and loads
EN 26098:1994 Information processing. Self-loading cartridges for 12,7 mm (0,5 in) wide magnetic tape
EN 26157-1:1992 Fasteners. Surface discontinuities. Bolts, screws and studs for general requirements
EN 26157-3:1992 Fasteners. Surface discontinuities. Bolts, screws and studs for special requirements
EN 2617:2001 Aerospace Series. Plates in titanium and titanium alloys. Thickness 6 mm $0L a $3L 100 mm. Dimensions
EN 2622:2001 Aerospace Series. Circular tubes, for fluids in heat resisting alloys. Diameter 3,2 mm $3L D $3L 100 mm. Dimensions
EN 263:2002 Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes
EN 2630:1994 Aluminium alloy AL-P7009-T74511. Extruded bars and sections a or D $3L 125 mm with peripheral coarse grain control
EN 2632:1994 Aluminium alloy AL-P7075-T73511. Extruded bars and sections a or D $3L 100 mm with peripheral coarse grain control
EN 2633:1994 Aluminium alloy AL-P2024-T3511. Extruded bars and sections 1,2 mm $3L a or D $3L 150 mm with peripheral coarse grain control
EN 2636:1994 Aluminium alloy AL-P6082-T6. Extruded bars and sections a or D $3L 200 mm with peripheral coarse grain control
EN 264:1991 Specification for safety requirements and testing of safety shut-off devices for combustion plants using liquid fuels
EN 2641:1989 Specification for control cable assemblies. Combinations and dimensions
EN 2644:1998 Rod assemblies for flight controls. Technical specification
EN 26461-1:1993 Water quality. Detection and enumeration of the spores of sulfite-reducing anaerobes ($7IClostridia$7R). Method by enrichment in a liquid medium
EN 26461-2:1993 Water quality. Detection and enumeration of the spores of sulfite-reducing anaerobes ($7IClostridia$7R). Method by membrane filtration
EN 2647:1995 Nuts, hexagonal, self-locking, ball seat, in alloy steel, cadmium plated, MoS$d2 lubricated. Classification: 900 MPa (at ambient temperature)/235$0DC
EN 2648:1995 Washers, concave, in alloy steel, cadmium plated
EN 2649:1995 Screws, pan head, slotted, threaded to head, in alloy steel, cadmium plated. Classification. 900 MPa (at ambient temperature)/235$0DC
EN 2650:1997 Screws, pan head, slotted, threaded to head, in corrosion resisting steel, passivated. Classification: 600 MPa (at ambient temperature) /425$0DC
EN 26501:1992 Ferronickel. Specification and delivery requirements
EN 2651:1997 Screws, pan head, slotted, threaded to head, in brass, tin plated. Classification: 380 MPa (at ambient temperature)/80$0DC
EN 2652:1997 Screws, 100$0D countersunk normal head, slotted, threaded to head, in alloy steel, cadmium plated. Classification: 900 MPa (at ambient temperature)/235$0DC
EN 2653:1997 Screws, 100$0D countersunk normal head, slotted, threaded to head, in corrosion resisting steel, passivated. Classification: 600 MPa (at ambient temperature) /425$0DC
EN 2654:1997 Screws, 100$0D countersunk normal head, slotted, threaded to head, in brass, tin plated. Classification: 380 MPa (at ambient temperature)/80$0DC
EN 26553:1991 Specification for marking of automatic steam traps
EN 26554:1991 Specification for face-to-face dimensions for flanged automatic steam traps
EN 2656:2001 Aerospace series. Pipe coupling. Coupling end, welded. Geometric configuration
EN 26590-1:1993 Packaging. Sacks. Vocabulary and types. Paper sacks
EN 26590-2:1993 Packaging. Sacks. Vocabulary and types. Sacks made from thermoplastic flexible film
EN 26591-1:1993 Packaging. Sacks. Description and method of measurement. Empty paper sacks
EN 26591-2:1993 Packaging. Sacks. Description and method of measurement. Empty sacks made from thermoplastic flexible film
EN 26595:1993 Water quality. Determination of total arsenic. Silver diethyldithiocarbamate spectrophotometric method
EN 26599-1:1993 Packaging. Sacks. Conditioning for testing. Paper sacks
EN 266:1992 Specification for textile wallcoverings
EN 2665-001:1999 Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A. Technical specification
EN 2665-003:1999 Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A. Metric thread terminals. Product standard
EN 2665-004:1999 Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A. UNC thread terminals. Product standard
EN 2667-6:2001 Aerospace series. Non-metallic materials. Foaming structural adhesives. Test methods. Determination of water absorption
EN 267:1999 Forced draught oil burners. Definitions, requirements, testing, marking
EN 26704:1991 Classification of automatic steam traps
EN 26777:1993 Water quality. Physical, chemical and biochemical methods. Determination of nitrite: molecular absorption spectrometric method
EN 268:1991 Specification for propellants for commercial ammunition. Requirements and test methods
EN 26801:1993 Rubber or plastics hoses. Determination of volumetric expansion
EN 26802:1993 Rubber and plastics hoses and hose assemblies. Wire reinforced. Hydraulic impulse test with flexing
EN 2681:2004 Aerospace series. Aluminium alloy AL-P7010-T74. Hand and die forgings. a $3L 150 mm
EN 2684:2004 Aerospace series. Aluminium alloy AL-P7010-T7651. Plate. 6 mm $0L a $3L 140 mm
EN 2687:2004 Aerospace series. Aluminium alloy AL-P7010-T7451. Plate. 6 mm $0L a $3L 160 mm
EN 26874:1992 Specification for dental resin-based pit and fissure sealants
EN 26891:1991 Timber structures. Joints made with mechanical fasteners. General principles for the determination of strength and deformation characteristics
EN 269:1995 Respiratory protective devices. Specification for powered fresh air hose breathing apparatus incorporating a hood
EN 26922:1993 Adhesives. Determination of tensile strength of butt joints
EN 26927:1991 Building construction. Jointing products. Sealants. Vocabulary
EN 2693:1994 Aluminium alloy. AL-P5086-H111. Sheet and strip 0,3 mm $3L a $3L 6 mm
EN 2694:1994 Aluminium alloy. AL-P6061-T6 or T62. Sheet and strip 0,4 mm $3L a $3L 6 mm
EN 26948:1991 Specification for production and performance characteristic tests for automatic steam traps
EN 2695:1994 Aluminium alloy. AL-P6081-T6. Sheet and strip 0,3 mm $3L a $3L 6 mm
EN 2696:1994 Aluminium alloy. AL-P7075-T6 or T62. Sheet and strip 0,4 mm $3L a $3L 6 mm
EN 27023:1993 Packaging. Sacks. Method of sampling empty sacks for testing
EN 27201-1:1994 Fire protection. Fire extinguishing media. Halogenated hydrocarbons. Specifications for halon 1211 and halon 1301
EN 27201-2:1994 Fire protection. Fire extinguishing media. Halogenated hydrocarbons. Code of practice for safe handling and transfer procedures
EN 27213:1993 Method for sampling pulps for testing
EN 27243:1994 Hot environments. Estimation of the heat stress on working man, based on the $7IWBGT$7R-index (wet bulb globe temperature)
EN 27286:1992 Graphical symbols for resistance welding equipment
EN 273:1992 Wood preservatives. Determination of the curative action against $7ILyctus brunneus$7R (Stephens) (Laboratory method)
EN 27326:1993 Rubber and plastics hoses. Assessment of ozone resistance under static conditions
EN 274-1:2002 Waste fittings for sanitary appliances. Requirements
EN 274-2:2002 Waste fitting for sanitary appliances. Test methods
EN 2743:2002 Aerospace series. Fibre reinforced plastics. Standard procedures for conditioning prior to testing unaged materials
EN 274-3:2002 Waste fittings for sanitary appliances. Quality control
EN 27434:1992 Slotted set screws with cone point
EN 27435:1992 Slotted set screws with long dog point
EN 27436:1992 Slotted set screws with cup point
EN 2744:1992 Non-metallic materials. Preferred test temperatures
EN 2746:1998 Glass fibre reinforced plastics. Flexural test. Three point bend method
EN 2747:1998 Glass fibre reinforced plastics. Tensile test
EN 275:1992 Wood preservatives. Determination of the protective effectiveness against marine borers
EN 2752:1990 Specification for nuts, anchor, self locking fixed, two lug, reduced series, with counterbore. Classification: 1100 MPa/235$0DC
EN 2753:1996 Nuts, anchor, self-locking, fixed, single lug, with counterbore, in alloy steel, cadmium plated, MoS$d2 lubricated. Classification. 1100 MPa (at ambient temperature) / 235$0DC
EN 27627-1:1993 Hardmetals. Chemical analysis by flame atomic absorption spectrometry. General requirements
EN 27627-2:1993 Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Determination of calcium, potassium, magnesium and sodium in contents from 0,001 to 0,02 % ($7Im/m$7R)
EN 27627-3:1993 Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Determination of cobalt, iron, manganese and nickel in contents from 0,01 to 0,5 % ($7Im/m$7R)
EN 27627-4:1993 Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Determination of molybdenum, titanium and vanadium in contents from 0,01 to 0,5 % ($7Im/m$7R)
EN 27627-5:1993 Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0,5 to 2 %
EN 27627-6:1993 Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Determination of chromium in contents 0,01 to 2 % ($7Im/m$7R)
EN 277:1996 Sacks for the transport of food aid. Sacks made of woven polypropylene fabric
EN 27721:1992 Countersunk head screws. Head configuration and gauging
EN 27740:1992 Specification for dimensions of surgical scalpels with detatchable blades
EN 27787-3:1994 Specification for dental rotary instruments. Cutters. Carbide laboratory cutters for milling machines
EN 278:1991 Specification for rubber materials for diaphragms in domestic appliances using combustible gases up to 200 mbar
EN 2781:1998 Non-metallic materials. Structural adhesives. Test methods. Determination of the primer thickness
EN 27828:1994 Water quality. Methods for biological testing. Methods of biological sampling: guidance on handnet sampling of aquatic benthic macro-invertebrates
EN 27841:1991 Methods for determination of steam loss of automatic steam traps
EN 27842:1991 Methods for determination of discharge capacity of automatic steam traps
EN 27888:1993 Water quality. Method for the determination of electrical conductivity
EN 279:1991 Specification for homogenous rubber materials for dynamic seals in domestic appliances using combustible gases up to 200 mbar
EN 2790:1991 Rod ends, adjustable, self-aligning plain bearing with self-lubricating liner and threaded shank with engagement: 1.5 thread. Dimensions and loads
EN 2791:1991 Rod ends, adjustable, single fork and threaded shank with engagement: 1.5 thread diameter. Dimensions and loads
EN 2792:1991 Rod ends, adjustable, double fork and threaded shank with engagement: 1.5 thread diameter. Dimensions and loads
EN 27931:1992 Specification for insulation caps and bushes for resistance welding equipment
EN 2794-001:1999 Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A. Technical specification
EN 2794-003:1999 Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A. Metric thread terminals. Product standard
EN 2794-004:1999 Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A. UNC thread terminals. Product standard
EN 27941:1994 Methods of test for petroleum and its products. Commercial propane and butane. Analysis by gas chromatography
EN 27963:1992 Specification for calibration block No. 2 for ultrasonic examination of welds
EN 27965-1:1993 Packaging. Sacks. Drop test. Paper sacks
EN 280:2001 Mobile elevating work platforms. Design calculations. Stability criteria. Construction. Safety. Examinations and tests
EN 28029:1993 Plastics hose. General purpose collapsible water hose, textile reinforced. Specification
EN 28033:1993 Rubber and plastics hose. Determination of adhesion between components
EN 28049:1992 Ferronickel shot. Sampling for analysis
EN 28050:1992 Ferronickel ingots or pieces. Sampling for analysis
EN 28064:1994 Information processing. Reels for 12,7 mm (0,5 in) wide magnetic tapes. Sizes 16, 18 and 22
EN 2808:1997 Anodizing of titanium and titanium alloys





To receive a price quote for any EN standard, please review our partners on the right


Return To The EN Standards Glossary Index






HOW TO OBTAIN STANDARDS 
To receive a direct quote for any EN standard, please review our partners below.

OTHER INFORMATION





Copyright StandardsDirect. European Standards.