EN 29367-2:1995 -
The StandardsDirect Glossary of European / EN Standards
THE EN STANDARDS GLOSSARY
en standards, European standards
Glossary of BC, ISO, and EN Standards

EN 29367-2:1995 Onwards

Standard No Title of Standard
EN 29367-2:1995 Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships. General requirements. Semi-trailers
EN 2937:1994 Screws, hexagon head, threaded to head in heat resisting steel FE-PA92HT (A286) classification: 900 MPa (at ambient temperature)/650$0DC
EN 2938:1996 Screws, hexagon head, threaded to head, in heat resisting steel FE-PA92HT (A 286), silver plated. Classification: 900 MPa (at ambient temperature)/650$0DC
EN 2939:1994 Screws, 100$0D countersunk head, offset cruciform recess, threaded to head in heat resisting steel FE-PA92HT (A286). Classification: 900 MPa (at ambient temperature)/650$0DC
EN 294:1992 Safety of machinery. Safety distances to prevent danger zones being reached by the upper limbs
EN 2940:1996 Screws, 100$0D countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A 286), silver plated. Classification: 900MPa (at ambient temperature)
EN 2942:1998 Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750), silver plated
EN 2943:1998 Inserts, screw thread, helical coil, self-locking. Technical specification
EN 2944:1998 Inserts, screw thread, helical coil, self-locking, in corrosion resisting steel FE-PA3004
EN 2945:1998 Inserts, screw thread, helical coil, self-locking. Assembly procedure
EN 29453:1994 Soft solder alloys. Chemical compositions and forms
EN 29454-1:1994 Soft soldering fluxes. Classification and requirements. Classification, labelling and packaging
EN 29455-1:1994 Soft soldering fluxes. Test methods. Determination of non-volatile matter, gravimetric method
EN 29455-11:1993 Soft soldering fluxes. Test methods. Solubility of flux residues
EN 29455-14:1993 Soft soldering fluxes. Test methods. Assessment of tackiness of flux residues
EN 29455-5:1993 Soft soldering fluxes. Test methods. Copper mirror test
EN 29455-8:1993 Soft soldering fluxes. Test methods. Determination of zinc content
EN 2948:1997 Washers, tab, in heat resisting steel, passivated
EN 2949:1997 Washers, wire locking, in corrosion resisting steel, passivated
EN 295-1:1991 Vitrified clay pipes and fittings and pipe joints for drains and sewers. Requirements
EN 29519:1994 Shipbuilding and marine structures. Rungs for dog-step ladders
EN 295-2:1991 Vitrified clay pipes and fittings and pipe joints for drains and sewers. Quality control and sampling
EN 295-3:1991 Vitrified clay pipes and fittings and pipe joints for drains and sewers. Test methods
EN 29539:1992 Specification for materials for equipment used in gas welding, cutting and allied processes
EN 295-4:1995 Vitrified clay pipes and fittings and pipe joints for drains and sewers. Requirements for special fittings, adaptors and compatible accessories
EN 2955:1993 Recycling of titanium and titanium alloy scrap
EN 295-5:1994 Vitrified clay pipes and fittings and pipe joints for drains and sewers. Requirements for perforated vitrified clay pipes and fittings
EN 295-6:1996 Vitrified clay pipes and fittings and pipe joints for drains and sewers. Requirements for vitrified clay manholes
EN 295-7:1996 Vitrified clay pipes and fittings and pipe joints for drains and sewers. Requirements for vitrified clay pipes and joints for pipe jacking
EN 297:1994 Gas-fired central heating boilers. Type B$d1$d1 and B$d1$d1$dB$dS boilers fitted with atmospheric burners of nominal heat input not exceeding 70 kW
EN 29775:1993 Small craft. Remote steering systems for single outboard motors of 15 kW to 40 kW power
EN 298:1994 Automatic gas burner control systems for gas burners and gas burning appliances with or without fans
EN 298:2003 Automatic gas burner control systems for gas burners and gas burning appliances with or without fans
EN 2985:1996 Nickel-cadmium batteries of format A type
EN 2986:1996 Nickel-cadmium batteries of format B type
EN 29865:1993 Textiles. Determination of water repellency of fabrics by the Bundesmann rain-shower test
EN 2987:1996 Nickel-cadmium batteries of format C type
EN 2988:1996 Nickel-cadmium batteries of format D type
EN 29885:1994 Wide-mouth glass containers. Deviation from flatness of top sealing surface. Test methods
EN 299:1999 Oil pressure atomizing nozzles. Determination of the angle and spray characteristics
EN 2991:1996 Nickel-cadmium batteries of format E type
EN 2993:1996 Nickel-cadmium batteries of format F type
EN 2997-1:1997 Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175$0DC continuous, 200$0DC continuous, 260$0DC peak.
EN 2997-10:1997 Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175$0DC continuous, 200$0DC continuous, 260$0DC peak.
EN 2997-11:1997 Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175$0DC continuous, 200$0DC continuous, 260$0DC peak.
EN 2997-2:1997 Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175$0DC continuous, 200$0DC continuous, 260$0DC peak.
EN 2997-3:1997 Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175$0DC continuous, 200$0DC continuous, 260$0DC peak.
EN 2997-4:1997 Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175$0DC continuous, 200$0DC continuous, 260$0DC peak
EN 2997-5:1997 Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175$0DC continuous, 200$0DC continuous, 260$0DC peak
EN 2997-6:1997 Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175$0DC continuous, 200$0DC continuous, 260$0DC peak
EN 2997-7:1997 Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175$0DC continuous, 200$0DC continuous, 260$0DC peak
EN 2997-8:1997 Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175$0DC continuous, 200$0DC continuous, 260$0DC peak
EN 2997-9:1997 Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175$0DC continuous, 200$0DC continuous, 260$0DC peak
EN 2998:1996 Washers, flat, in heat resisting steel, passivated
EN 300:1997 Oriented strand boards (OSB). Definitions, classification and specifications
EN 3004:1997 Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286). Classification: 1100 MPa (at ambient temperature)/650$0DC. Technical specification
EN 30042:1994 Arc-welded joints in aluminium and its weldable alloys. Guidance on quality levels for imperfections
EN 3005:2004 Aerospace series. Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated or uncoated.
EN 3006:1994 Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286). Classification: 900 MPa (at ambient temperature)/650$0DC
EN 3007:1996 Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), Silver plated. Classification: 900 MPa (at ambient temperature)/650$0DC
EN 3008:1998 Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718). Classification:1275 MPa (at ambient temperature)/650$0DC
EN 3009:1998 Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated. Classification. 1275 MPa (at ambient temperature)/650$0DC
EN 301:1992 Adhesives, phenolic and aminoplastic, for load-bearing timber structures: classification and performance requirements
EN 3010:1998 Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy). Classification: 1210 MPa (at ambient temperature)/730$0DC
EN 3011:1998 Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated. Classification:1210 MPa (at ambient temperature)/730 $0DC
EN 30-1-1:1998 Domestic cooking appliances burning gas. Safety. General
EN 3012:1996 Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy). Classification: 1210 MPa (at ambient temperature)/730$0DC
EN 30-1-2:1999 Domestic cooking appliances burning gas. Safety. Appliances having forced-convection ovens and/or grills
EN 3013:1996 Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated. Classification: 1210 MPa (at ambient temperature)/730$0DC
EN 30-1-3:2003 Domestic cooking appliances burning gas. Safety. Appliances having a glass ceramic hotplate
EN 30139-1:1994 Dentistry. Resilient lining materials for removable dentures. Specification for short-term materials
EN 3014:2001 Aerospace series. Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286). Classification: 1100 MPa (at ambient temperature)/650$0DC
EN 30-1-4:2002 Domestic cooking appliances burning gas. Safety. Appliances having one or more burners with an automatic burner control system
EN 3015:2001 Aerospace series. Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286), silver plated. Classification: 1100 MPa (at ambient temperature)/650$0DC
EN 30-2-1:1998 Domestic cooking appliances burning gas. Rational use of energy. General
EN 302-1:2004 Adhesives for load bearing timber structures. Test methods. Determination of bond strength in longitudinal tensile shear strength
EN 30-2-2:1999 Domestic cooking appliances burning gas. Rational use of energy. Appliances having forced-convection ovens and/or grills
EN 302-2:2004 Adhesives for load-bearing timber structures. Test methods. Determination of resistance to delamination
EN 302-3:2004 Adhesives for load-bearing timber structures. Test methods. Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength
EN 302-4:2004 Adhesives for load-bearing timber structures. Test methods. Determination of the effects of wood shrinkage on the shear strength
EN 3026:1994 Test method for dry film lubricants. Corrosion test on steel specimens
EN 302-6:2004 Adhesives for load-bearing timber structures. Test methods. Determination of the conventional pressing time.
EN 3027:1994 Test method for dry film lubricants. Salt spray test
EN 302-7:2004 Adhesives for load-bearing timber structures. Test methods. Determination of the conventional working life
EN 3030:1994 Test method for dry film lubricants. Solids content
EN 303-1:1999 Heating boilers. Heating boilers with forced draught burners. Terminology, general requirements, testing and marking
EN 3032:1994 Test method for dry film lubricants. Thickness measurement
EN 303-2:1999 Heating boilers. Heating boilers with forced draught burners. Special requirements for boilers with atomizing oil burners
EN 30326-1:1994 Mechanical vibration. Laboratory method for evaluating vehicle seat vibration. Basic requirements
EN 303-3:1999 Heating boilers. Gas-fired central heating boilers. Assembly comprising a boiler body and a forced draught burner
EN 303-4:1999 Heating boilers. Heating boilers with forced draught burners. Heating boilers with forced draught burners.
EN 3035:1997 Screws, 100$0D countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification: 1100 MPa
EN 303-5:1999 Heating boilers. Heating boilers with forced draught burners. Heating boilers for solid fuels, hand and automatically fired, nominal heat output of up to 300 kW.
EN 303-6:2000 Heating boilers. Heating boilers with forced draught burners.
EN 3037:1997 Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS$d2 lubricated. Classification: 1100 MPa
EN 3038:1997 Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated. Classification: 1100 Mpa 425$0DC
EN 304:1992 Heating boilers. Test code for heating boilers for atomizing oil burners
EN 3044:1998 Installation holes for inserts, screw thread, helical coil, self-locking. Design standard
EN 3045:1994 Bearings, airframe rolling. Rigid single row ball bearings in steel. Diameter series 0 and 2. Reduced clearance category. Dimensions and loads
EN 3046:1994 Bearings, airframe rolling. Rigid single row ball bearings in steel, cadmium plated. Diameter series 0 and 2. Reduced clearance category. Dimensions and loads
EN 3047:1994 Bearings, airframe rolling. Rigid single row ball bearings in corrosion resisting steel. Diameter series 0 and 2. Reduced clearance category. Dimensions and loads
EN 3048:2001 Bearings, spherical plain in corrosion resisting steel with self-lubricating liner. Light series. Elevated load at ambient temperature. Dimensions and loads
EN 3049:1998 O-rings, in fluorocarbon rubber (FKM), low compression set. Hardness 80 IRHD
EN 305:1997 Heat exchangers. Definitions of performance of heat exchangers and the general test procedure for establishing performance of all heat exchangers
EN 3050:1998 O-rings, in fluorocarbon rubber (FKM), low compression set. Technical specification
EN 3052:1994 Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated. Classification: 1100 MPa (at ambient temperature)/425$0DC
EN 3053:1994 Bearings, airframe rolling. Single row self-aligning roller bearings in steel. Dimensions and loads
EN 3054:1994 Bearings, airframe rolling. Single row self-aligning roller bearings in steel, cadmium plated. Dimensions and loads
EN 3055:1994 Bearings, airframe rolling. Single row self-aligning roller bearings in corrosion resisting steel. Dimensions and loads
EN 3056:1994 Bearings, airframe rolling. Rigid double row ball bearings in steel. Dimensions and loads
EN 3057:1994 Bearings, airframe rolling. Rigid double row ball bearings in steel, cadmium plated. Dimensions and loads
EN 3058:1994 Bearings, airframe rolling. Rigid double row ball bearings in corrosion resisting steel. Dimensions and loads
EN 306:1997 Heat exchangers. Methods of measuring the parameters necessary for establishing the performance
EN 3063:1994 Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy). Classification: 1210 MPa (at ambient temperature)
EN 3064:1996 Shank nuts, self-locking, serrated. Installation procedure





To receive a price quote for any EN standard, please review our partners on the right


Return To The EN Standards Glossary Index






HOW TO OBTAIN STANDARDS 
To receive a direct quote for any EN standard, please review our partners below.

OTHER INFORMATION





Copyright StandardsDirect. European Standards.