EN 3446:1995 -
The StandardsDirect Glossary of European / EN Standards
THE EN STANDARDS GLOSSARY
en standards, European standards
Glossary of BC, ISO, and EN Standards

EN 3446:1995 Onwards

Standard No Title of Standard
EN 3446:1995 Bearings, precision ball without flange in corrosion resisting steel, for instruments and equipment. Dimensions and loads
EN 3475-100:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. General
EN 3475-201:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Visual examination
EN 3475-202:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Mass
EN 3475-301:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Ohmic resistance per unit length
EN 3475-302:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Voltage proof test
EN 3475-303:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Insulation resistance
EN 3475-304:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Surface resistance
EN 3475-305:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Overload resistance
EN 3475-401:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Accelerated ageing
EN 3475-402:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Shrinkage and delamination
EN 3475-403:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Delamination and blocking
EN 3475-404:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Thermal shock
EN 3475-405:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Bending at ambient temperature
EN 3475-406:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Cold bend test
EN 3475-407:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Flammability
EN 3475-409:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Air-excluded ageing
EN 3475-410:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Thermal endurance
EN 3475-412:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Humidity resistance
EN 3475-413:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Wrap back test
EN 3475-501:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Dynamic cut-through
EN 3475-502:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Notch propagation
EN 3475-503:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Scrape abrasion
EN 3475-504:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Torsion
EN 3475-505:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Tensile tests on conductors and strands
EN 3475-506:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Plating continuity
EN 3475-507:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Adherence of plating
EN 3475-508:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Plating thickness
EN 3475-509:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Solderability
EN 3475-510:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Tensile strength and elongation of extruded insulation, sheath and jacket material
EN 3475-511:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Cable-to-cable abrasion
EN 3475-512:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Flexure endurance
EN 3475-603:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Resistance to wet arc tracking
EN 3475-604:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Resistance to dry arc propagation
EN 3475-605:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Wet short circuit test
EN 3475-701:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Strippability and adherence of insulation to the conductor
EN 3475-702:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Screen pushback capability
EN 3475-703:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Permanence of manufacturer's marking
EN 3475-704:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Flexibility
EN 3475-705:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Contrast measurement
EN 3475-801:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Capacitance per unit length
EN 3475-802:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Capacitance unbalance
EN 3475-803:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Capacitance variation
EN 3475-804:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Velocity of propagation
EN 3475-805:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Characteristic impedance
EN 3475-806:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Attenuation
EN 3475-807:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Transfer impedance
EN 3475-808:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Cross-talk
EN 348:1992 Protective clothing. Determination of behaviour of materials on impact of small splashes of molten metal
EN 349:1993 Safety of machinery. Minimum gaps to avoid crushing of parts of the human body
EN 35:2000 Pedestal bidets with over-rim supply. Connecting dimensions
EN 350-1:1994 Durability of wood and wood-based products. Natural durability of solid wood. Guide to the principles of testing and classification of natural durability of wood
EN 350-2:1994 Durability of wood and wood-based products. Natural durability of solid wood. Guide to natural durability and treatability of selected wood species of importance in Europe
EN 3506:2001 Aerospace series. Hot rolled sheets and plates in heat resisting alloys. Thickness 2,0 mm $3L a $3L 100 mm. Dimensions
EN 351-1:1996 Durability of wood and wood-based products. Preservative-treated solid wood. Classification of preservative penetration and retention
EN 351-2:1996 Durability of wood and wood-based products. Preservative-treated solid wood. Guidance on sampling for the analysis of preservative-treated wood
EN 352-1:2002 Hearing protectors. Safety requirements and testing. Ear-muffs
EN 352-2:2002 Hearing protectors. Safety requirements and testing. Ear-plugs
EN 352-3:2002 Hearing protectors. Safety requirements and testing. Ear-muffs attached to an industrial safety helmet
EN 352-4:2001 Hearing protectors. Safety requirements and testing. Level-dependent ear-muffs
EN 352-5:2002 Hearing protectors. Safety requirements and testing. Active noise reduction ear-muffs
EN 352-6:2002 Hearing protectors. Safety requirements and testing. Ear-muffs with electrical audio input
EN 352-7:2002 Hearing protectors. Safety requirements and testing. Level-dependent ear-plugs
EN 353-1:2002 Personal protective equipment against falls from a height. Guided type fall arresters including a rigid anchor line
EN 353-2:2002 Personal protective equipment against falls from a height. Guided type fall arresters including a flexible anchor line
EN 354:2002 Personal protective equipment against falls from a height. Lanyards
EN 3541:1992 Rod ends, adjustable, self-aligning ball bearing with threaded shank. Dimensions, torques, clearances and loads
EN 3542:1998 Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750)
EN 3543:1997 Screws, 100$0D countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated.
EN 355:2002 Personal protective equipment against falls from a height. Energy absorbers
EN 3553:2004 Aerospace series. Aluminium alloy AL-P2618A-T6511. Extruded bar and section. a or D $3L 160 mm
EN 356:2000 Glass in building. Security glazing. Testing and classification of resistance against manual attack
EN 3561:2001 Aerospace series. Pipe coupling 8$0D30' in titanium alloy. Ferrules with dynamic beam seal end, welded and reduced at pipe end
EN 3566:2001 Aerospace series. Pipe coupling 8$0D30' in titanium alloy. Adaptor with lockring
EN 3567-001:2001 Aerospace series. In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B. Technical specification
EN 3567-003:2001 Aerospace series. In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B. Single in-line couplers. Product standard
EN 3567-004:2001 Aerospace series. In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B. Double in-line couplers. Product standard
EN 357:2004 Glass in building. Fire resistant glazed elements with transparent or translucent glass products. Classification of fire resistance
EN 358:2000 Personal protective equipment for work positioning and prevention of falls from a height. Belts for work positioning and restraint and work positioning lanyards
EN 3-6:1996 Portable fire extinguishers. Provisions for the attestation of conformity of portable fire extinguishers in accordance with EN 3 Part 1 to Part 5
EN 36:1999 Wall-hung bidets with over-rim supply. Connecting dimensions
EN 360:2002 Personal protective equipment against falls from a height. Retractable type fall arresters
EN 361:2002 Personal protective equipment against falls from a height. Full body harnesses
EN 3611:1995 Spigots. Dimensions and fit selection. Design standard
EN 3612:1997 Undercuts for splines. Design standard
EN 362:2004 Personal protective equipment against falls from a height. Connectors
EN 363:2002 Personal protective equipment against falls from a height. Fall arrest systems
EN 364:1993 Personal protective equipment against falls from a height. Test methods
EN 3642:1997 Rivets, solid, 100$0D countersunk normal head, with dome, in titanium TI-PO2, anodized, inch based series
EN 3643:1997 Rivets, solid, 100$0D countersunk normal head, in titanium TI-PO2, anodized, inch based series
EN 3644:1997 Rivets, solid, universal head, in titanium TI-PO2, anodized, inch based series
EN 365:2004 Personal protective equipment against falls from a height. General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging
EN 3663:2001 Aerospace Series. Pipe coupling. O-rings in rubber NBR, 75 IRHD, temperature range: $-55$0DC to + 135$0DC
EN 3665:1997 Test methods for paints and varnishes. Filiform corrosion resistance test on aluminium alloys
EN 367:1992 Protective clothing. Protection against heat and fire. Method for determining heat transmission on exposure to flame
EN 3676:1998 Inserts, thin wall, self-locking. Design standard
EN 3688:2001 Aerospace series. T-ring fillers in titanium alloy for welded pipes. 14000 kPa nominal pressure
EN 3689:2001 Aerospace series. T-ring fillers in titanium alloy for welding pipes. 28000 kPa nominal pressure
EN 3690:2001 Aerospace series. Pipe coupling 8$0D30' in titanium alloy. Unions, bulkhead, long
EN 3691:2001 Aerospace series. Pipe coupling 8$0D30' in titanium alloy. Unions, bulkhead, long welded
EN 3696:2001 Aerospace series. Washers in heat resisting steel
EN 37:1999 Pedestal W.C. pans with independent water supply. Connecting dimensions
EN 3-7:2004 Portable fire extinguishers. Characteristics, performance requirements and test methods
EN 370:1993 Wood preservatives. Determination of eradicant efficacy in preventing emergence of $7IAnobium punctatum$7R (De Geer)
EN 3720:1995 Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS$d2 coated. Classification: 1100 MPa (at ambient temperature)/425$0DC
EN 3721:1995 Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel, FE-PA92HT (A 286), MoS$d2 coated. Classification: 1100 MPa (at ambient temperature)/425$0DC
EN 3722:1995 Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A 286), MoS$d2 coated. Classification: 1100 MPa (at ambient temperature)/425$0DC
EN 3723:1996 Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS$d2 coated. Classification: 1100 MPa (at ambient temperature)/425$0DC
EN 3724:2004 Bolts, double hexagon head, relieved shank, long thread, in titanium alloy TI-P64001, MoS$d2 coated. Strength class: 1100 MPa (at ambient temperature)
EN 3725:2004 Aerospace series. Screws, pan head, six lobe recess, normal shank, long thread, in titanium alloy TI-P64001, anodized, MoS$d2 coated. Strength class: 1100 MPa (at ambient temperature)
EN 3726:2004 Aerospace series. Nuts, self-locking, clip, in heat resisting steel FE-PA2601 (A286), MoS$d2 coated. Classification: 1100 MPa (at ambient temperature)/425$0DC
EN 373:1993 Protective clothing. Assessment of resistance of materials to molten metal splash
EN 3730:2001 Aerospace series. Clamps, saddle. Fixed and sliding version in aluminium alloy with rubber cushioning. Dimensions. Masses
EN 3740:1997 Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS$d2 lubricated. Classification: 1100 MPa (at ambient temperature)/315$0DC
EN 374-1:2003 Protective gloves against chemicals and micro-organisms. Terminology and performance requirements





To receive a price quote for any EN standard, please review our partners on the right


Return To The EN Standards Glossary Index






HOW TO OBTAIN STANDARDS 
To receive a direct quote for any EN standard, please review our partners below.

OTHER INFORMATION





Copyright StandardsDirect. European Standards.