EN 480-13:2002 -
The StandardsDirect Glossary of European / EN Standards
THE EN STANDARDS GLOSSARY
en standards, European standards
Glossary of BC, ISO, and EN Standards

EN 480-13:2002 Onwards

Standard No Title of Standard
EN 480-13:2002 Admixtures for concrete, mortar and grout. Test methods. Reference masonry mortar for testing mortar admixtures
EN 480-2:1997 Admixtures for concrete, mortar and grout. Test methods. Determination of setting time
EN 480-4:1997 Admixtures for concrete, mortar and grout. Test methods. Determination of bleeding of concrete
EN 480-5:1997 Admixtures for concrete, mortar and grout. Test methods. Determination of capillary absorption
EN 480-6:1997 Admixtures for concrete, mortar and grout. Test methods. Infrared analysis
EN 480-8:1997 Admixtures for concrete, mortar and grout. Test methods. Determination of the conventional dry material content
EN 481:1993 Workplace atmospheres. Size fraction definitions for measurement of airborne particles
EN 482:1994 Workplace atmospheres. General requirements for the performance of procedures for the measurement of chemical agents
EN 483:2000 Gas-fired central heating boilers. Type C boilers of nominal heat input not exceeding 70 kW
EN 484:1998 Specification for dedicated liquefied petroleum gas appliances. Independent hotplates, including those incorporating a grill for outdoor use
EN 485-1:1994 Aluminium and aluminium alloys. Sheet, strip and plate. Technical conditions for inspection and delivery
EN 485-2:2004 Aluminium and aluminium alloys. Sheet, strip and plate. Mechanical properties
EN 485-3:2003 Aluminium and aluminium alloys. Sheet, strip and plate. Tolerances on dimensions and form for hot-rolled products
EN 485-4:1994 Aluminium and aluminium alloys. Sheet, strip and plate. Tolerances on shape and dimensions for cold-rolled products
EN 486:1994 Aluminium and aluminium alloys. Extrusion ingots. Specifications
EN 487:1994 Aluminium and aluminium alloys. Rolling ingots. Specifications
EN 488:2003 District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks.
EN 489:2003 District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks.
EN 490:2004 Concrete roofing tiles and fittings for roof covering and wall cladding. Product specifications
EN 491:2004 Concrete roofing tiles and fittings for roof covering and wall cladding. Test methods
EN 49-1:2005 Wood preservatives. Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival. Application by surface treatment (laboratory method)
EN 492:2004 Fibre-cement slates and fittings. Product specification and test methods
EN 49-2:2005 Wood preservatives. Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival. Application by impregnation (laboratory method)
EN 494:2004 Fibre-cement profiled sheets and fittings. Product specification and test methods
EN 495-5:2001 Flexible sheets for waterproofing. Determination of foldability at low temperature. Plastic and rubber sheets for roof waterproofing
EN 497:1998 Specification for dedicated liquefied petroleum gas appliances. Multi-purpose boiling burners for outdoor use
EN 498:1998 Specification for dedicated liquefied petroleum gas appliances. Barbecues for outdoor use
EN 499:1995 Welding consumables. Covered electrodes for manual metal arc welding of non alloy and fine grain steels. Classification
EN 500-1:1996 Mobile road construction machinery. Safety. Common requirements
EN 50014:1998 Electrical apparatus for potentially explosive atmospheres. General requirements
EN 50015:1994 Electrical apparatus for potentially explosive atmospheres. Oil immersion 'o'
EN 50015:1998 Electrical apparatus for potentially explosive atmospheres. Oil immersion "o"
EN 50016:2002 Electrical apparatus for potentially explosive atmospheres. Pressurized apparatus "p"
EN 50017:1994 Electrical apparatus for potentially explosive atmospheres. Powder filling 'q'
EN 50017:1998 Electrical apparatus for potentially explosive atmospheres. Powder filling "q"
EN 50018:2000 Electrical apparatus for potentially explosive atmospheres. Flameproof enclosure 'd'
EN 50019:2000 Electrical apparatus for potentially explosive atmospheres. Increased safety 'e'
EN 500-2:1996 Mobile road construction machinery. Safety. Specific requirements for road-milling machines
EN 50020:1995 Electrical apparatus for potentially explosive atmospheres. Intrinsic safety 'i'
EN 50020:2002 Electrical apparatus for potentially explosive atmospheres. Intrinsic safety 'i'
EN 50021:1999 Electrical apparatus for potentially explosive atmospheres. Type of protection "n"
EN 500-3:1996 Mobile road construction machinery. Safety. Specific requirements for soil stabilization machines
EN 50033:1991 Specification for construction and testing of miners' caplamps in relation to the risk of explosion, for mines susceptible to firedamp
EN 500-4:1996 Mobile road construction machinery. Safety. Specific requirements for compaction machines
EN 50049-1:1998 Domestic and similar electronic equipment interconnection requirements. Peritelevision connector
EN 50050:2001 Electrical apparatus for potentially explosive atmospheres. Electrostatic hand-held spraying equipment
EN 50059:1991 Specification for electrostatic hand-held spraying equipment for non-flammable material for painting and finishing
EN 50062:1992 Specification for ceramic pressurized hollow insulators for high-voltage switchgear and controlgear
EN 50065-1:2001 Specification for signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz. General requirements, frequency bands and electromagnetic disturbances
EN 50065-2-1:2003 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz
EN 50065-2-2:2003 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz
EN 50065-2-3:2003 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz
EN 50065-4-1:2002 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz. Low voltage decoupling filters. Generic specification
EN 50065-4-2:2002 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz. Low voltage decoupling filters. Safety requirements
EN 50065-4-3:2003 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz. Low voltage decoupling filters. Incoming filter
EN 50065-4-4:2003 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz. Low voltage decoupling filters. Impedance filter
EN 50065-4-5:2003 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz. Low voltage decoupling filters. Segmentation filter
EN 50065-4-6:2004 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz. Low voltage decoupling filters. Phase coulper
EN 50065-7:2001 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz. Equipment impedance
EN 50066:1993 Specification for mini-couplers for the interconnection of electrical mains supplied equipment in road vehicles
EN 50068:1991 Specification for wrought steel enclosures for gas-filled high-voltage switchgear and controlgear
EN 50069:1991 Specification for welded composite enclosures of cast and wrought aluminium alloys for gas-filled high-voltage switchgear and controlgear
EN 50072:1992 Medical electrical equipment. Particular requirements for safety. Specification for peritoneal dialysis equipment
EN 50073:1999 Guide for selection, installation, use and maintenance of apparatus for the detection and measurement of combustible gases or oxygen
EN 50075:1991 Specification for flat non-wirable two-pole plugs 2.5 A 250 V, with cord, for the connection of class II-equipment for household and similar purposes
EN 50077:1993 Specification for low profile connectors (IS-1) for implantable pacemakers
EN 50080:1991 Specification for RF characteristics of MAC AM-VSB cable receivers
EN 50083-1:1994 Cabled distribution systems for television and sound signals. Safety requirements
EN 50083-10:2002 Cabled distribution systems for television and sound signals. System performance for return paths
EN 50083-2:2001 Cabled distribution systems for television and sound signals. Electromagnetic compatibility for equipment
EN 50083-3:2002 Cabled distribution systems for television and sound signals. Active wideband equipment for coaxial cable networks
EN 50083-4:1999 Cabled distribution systems for television and sound signals. Passive wideband equipment for coaxial cable networks
EN 50083-5:2002 Cabled distribution systems for television and sound signals. Headend equipment
EN 50083-7:1997 Cabled distribution systems for television and sound signals. System performance
EN 50083-8:2002 Cabled distribution systems for television and sound signals. Electromagnetic compatibility for networks
EN 50083-9:2002 Cabled distribution systems for television and sound signals. Interfaces for CATV/SMATV headends and similar professional equipment for DVB/MPEG-2 transport streams
EN 50085-1:1999 Cable trunking and cable ducting systems for electrical installations. General requirements
EN 50085-2-3:2001 Cable trunking and cable ducting systems for electrical installations. Particular requirements for slotted cable trunking systems intended for installation in cabinets
EN 50086-1:1994 Specification for conduit systems for cable management. General requirements
EN 50086-2-1:1996 Specification for conduit systems for cable management. Particular requirements. Rigid conduit systems
EN 50086-2-2:1996 Specification for conduit systems for cable management. Particular requirements. Pliable conduit systems
EN 50086-2-3:1996 Specification for conduit systems for cable management. Particular requirements. Flexible conduit systems
EN 50086-2-4:1994 Specification for conduit systems for cable management. Particular requirements. Conduit systems buried underground
EN 50087:1993 Safety of household and similar electrical appliances. Particular requirements for bulk-milk coolers
EN 50088:1996 Safety of electric toys
EN 50089:1992 Specification for cast resin partitions for metal-enclosed gas-filled high-voltage switchgear and controlgear
EN 50090-2-1:1996 Home and Building Electronic Systems (HBES). System overview. Architecture
EN 50090-2-2:1997 Home and Building Electronic Systems (HBES). System overview. General technical requirements
EN 50090-2-3:2005 Home and building electronic systems (HBES). System overview. General functional safety requirements for products intended to be integrated in HBES
EN 50090-3-1:1996 Home and Building Electronic Systems (HBES). Aspects of application. Introduction to the application structure
EN 50090-3-2:2004 Home and Building Electronic Systems (HBES). Aspects of application
EN 50090-4-1:2004 Home and Building Electronic Systems (HBES). Media independent layers
EN 50090-4-2:2004 Home and Building Electronic Systems (HBES). Media independent layers
EN 50090-5-1:2005 Home and Building Electronic Systems (HBES). Media and media dependent layers. Power line for HBES Class 1
EN 50090-5-2:2004 Home and Building Electronic Systems (HBES). Media and media dependent layers
EN 50090-7-1:2004 Home and Building Electronic Systems (HBES). System management
EN 50090-8:2001 Home and Building Electronic Systems (HBES). Conformity assessment of products
EN 50090-9-1:2004 Home and building electronic systems (HBES). Installation requirements
EN 50091-1-1:1997 Uninterruptible power systems (UPS). General and safety requirements for UPS used in operator access areas
EN 50091-1-2:1999 Specification for uninterruptible power systems (UPS). General and safety requirements for UPS used in restricted access locations
EN 50091-2:1996 Specification for uninterruptible power systems (UPS). EMC requirements
EN 50094:1993 Access control system for the MAC/packet family: EUROCRYPT
EN 50098-1:1999 Customer premises cabling for information technology. ISDN basic access
EN 50098-2:1996 Customer premises cabling for information technology. 2048 kbit/s ISDN primary access and leased line network interface
EN 501:1994 Roofing products from metal sheet. Specifications for fully supported roofing products of zinc sheet
EN 50103:1996 Guidance on the application of EN 29001 and EN 46001 and of EN 29002 and EN 46002 for the active (including active implantable) medical device industry
EN 50104:2002 Electrical apparatus for the detection and measurement of oxygen. Performance requirements and test methods
EN 50106:1997 Specification for safety of household and similar electrical appliances. Particular rules for routine tests referring to appliances under the scope of BS EN 60335-1 and BS EN 60967
EN 50107-1:2002 Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV. General requirements
EN 50107-2:2005 Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV.
EN 50109-1:1996 Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications. General requirements and tests
EN 50109-2-1:1996 Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications. Particular requirements.
EN 50109-2-2:1996 Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications. Particular requirements.
EN 50109-2-3:1996 Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications. Particular requirements.
EN 50109-2-4:1996 Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications. Particular requirements.





To receive a price quote for any EN standard, please review our partners on the right


Return To The EN Standards Glossary Index






HOW TO OBTAIN STANDARDS 
To receive a direct quote for any EN standard, please review our partners below.

OTHER INFORMATION





Copyright StandardsDirect. European Standards.