EN 50174-2:2001 -
The StandardsDirect Glossary of European / EN Standards
THE EN STANDARDS GLOSSARY
en standards, European standards
Glossary of BC, ISO, and EN Standards

EN 50174-2:2001 Onwards

Standard No Title of Standard
EN 50174-2:2001 Information technology. Cabling installation. Installation planning and practices inside buildings
EN 50174-3:2003 Installation technology. Cabling installation. Installation planning and practices outside buildings
EN 50176:1997 Automatic electrostatic spraying installations for flammable liquid spraying material
EN 50177:1997 Automatic electrostatic spraying installations for flammable coating powder
EN 50178:1998 Electronic equipment for use in power installations
EN 50180:1999 Bushings above 1 kV up to 36 kV and from 250 A to 3,15 kA for liquid filled transformers
EN 50181:1999 Plug-in type bushings above 1 kV up to 36 kV and from 250 A to 1.25 kA for equipment other than liquid filled transformers
EN 50182:2001 Conductors for overhead lines. Round wire concentric lay stranded conductors
EN 50183:2000 Conductors for overhead lines. Aluminium-magnesium-silicon alloy wires
EN 50186-1:1999 Live-line washing systems for power installations with nominal voltages above 1 kV. Common requirements
EN 50186-2:1999 Live-line washing systems for power installations with nominal voltages above 1 kV. National annexes
EN 50187:1997 Gas-filled compartments for a.c. switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
EN 50189:2000 Conductors for overhead lines. Zinc coated steel wires
EN 50191:2001 Erection and operation of electrical test equipment
EN 50193:1997 Closed electrical instantaneous water heaters. Methods for measuring performance
EN 50194:2000 Electrical apparatus for the detection of combustible gases in domestic premises. Test methods and performance requirements
EN 50195:1997 Code of practice for the safe use of fully enclosed askarel-filled electrical equipment
EN 502:2000 Roofing products from metal sheet. Specification for fully supported products of stainless steel sheet
EN 50200:2000 Method of test for resistance to fire of unprotected small cables for use in emergency circuits
EN 50201:2001 Interfaces for DVB-IRD
EN 50203:1997 Automatic channel installation (ACI)
EN 50205:2002 Relays with forcibly guided (mechanically linked) contacts
EN 50206-1:1999 Railway applications. Rolling stock. Pantographs: characteristics and tests. Pantographs for main line vehicles
EN 50206-2:1999 Railway applications. Rolling stock. Pantographs: characteristics and tests. Pantographs for metros and light rail vehicles
EN 50207:2001 Railway applications. Electronic power converters for rolling stock
EN 50209:1999 Test of insulation of bars and coils of high-voltage machines
EN 50212:1997 Connectors for thermoelectric sensors
EN 50214:1998 Flexible cables for lifts
EN 50215:1999 Railway applications. Testing of rolling stock after completion of construction and before entry into service
EN 50216-1:2002 Power transformers and reactor fittings. General
EN 50216-2:2002 Power transformers and reactor fittings. Gas and oil actuated relay for liquid immersed transformers and reactors with conservator
EN 50216-3:2002 Power transformers and reactor fittings. Protective relay for hermetically sealed liquid-immersed transformers and reactors without gaseous cushion
EN 50216-4:2002 Power transformers and reactor fittings. Basic accessories (earthing terminal, drain and filling devices, thermometer pocket, wheel assembly)
EN 50216-5:2002 Power transformers and reactor fittings. Liquid level, pressure devices and flow indicators
EN 50216-6:2002 Power transformers and reactor fittings. Cooling equipment. Removable radiators for oil-immersed transformers
EN 50216-7:2002 Power transformers and reactor fittings. Electric pumps for transformer oil
EN 50221:1997 Common interface specification for conditional access and other digital video broadcasting decoder applications
EN 50223:2001 Automatic electrostatic application equipment for flammable flock material
EN 50225:1997 Code of practice for the safe use of fully enclosed oil-filled electrical equipment which may be contaminated with PCBs
EN 50227:1999 Control circuit devices and switching elements proximity sensors, d.c. interface for proximity sensors and switching amplifiers (NAMUR)
EN 50229:2001 Electric clothes washer-dryers for household use. Methods of measuring the performance
EN 50238:2003 Railway applications. Compatibility between rolling stock and train detection systems
EN 50239:2000 Railway applications. Radio remote control system of traction vehicle for freight traffic
EN 50240:2004 Electromagnetic compatibilty (EMC). Product standard for resistance welding equipment
EN 50241-1:1999 Specification for open path apparatus for the detection of combustible or toxic gases and vapours. General requirements and test methods
EN 50241-2:1999 Specification for open path apparatus for the detection of combustible or toxic gases and vapours. Performance requirements for apparatus for the detection of combustible gases
EN 50242:1999 Electric dishwashers for household use. Test methods for measuring the performance
EN 50243:2002 Outdoor bushings for 24 kV and 36 kV and for 5 kA and 8 kA, for liquid filled transformers
EN 50244:2000 Electrical apparatus for the detection of combustible gases in domestic premises. Guide on the selection, installation, use and maintenance
EN 50248:2001 Characteristics of DAB receivers
EN 50249:2002 Electromagnetic locators for buried pipes and cables. Performance and safety
EN 50250:2002 Conversion adaptors for industrial use
EN 50256:1998 Characteristics of DVB receivers
EN 50260-1:2002 Safety of hand-held battery-powered motor-operated tools and battery packs. General requirements
EN 50260-2-1:2002 Safety of hand-held battery-powered motor-operated tools and battery packs. Particular requirements for drills
EN 50260-2-10:2002 Safety of hand-held battery-powered motor-operated tools and battery packs. Particular requirements for reciprocating saws
EN 50260-2-14:2002 Safety of hand-held battery-powered motor-operated tools and battery packs. Particular requirements for routers and laminate trimmers
EN 50260-2-2:2002 Safety of hand-held battery-powered motor-operated tools and battery packs. Particular requirements for screwdrivers and impact wrenches
EN 50260-2-4:2002 Safety of hand-held battery-powered motor-operated tools and battery packs. Particular requirements for sanders
EN 50260-2-5:2002 Safety of hand-held battery-powered motor-operated tools and battery packs. Particular requirements for circular saws and circular knives
EN 50260-2-6:2002 Safety of hand-held battery-powered motor-operated tools and battery packs. Particular requirements for hammers
EN 50260-2-7:2002 Safety of hand-held battery-powered motor-operated tools and battery packs. Particular requirements for spray guns
EN 50261:1999 Railway applications. Mounting of electronic equipment
EN 50262:1999 Cable glands for electrical installations
EN 50264-1:2002 Railway applications. Railway rolling stock cables having special fire performance. Standard wall. General requirements
EN 50264-2:2002 Railway applications. Railway rolling stock cables having special fire performance. Standard wall. Single core cables
EN 50264-3:2002 Railway applications. Railway rolling stock cables having special fire performance. Standard wall. Multicore cables
EN 50266-1:2001 Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Apparatus
EN 50266-2-1:2001 Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Procedures. Category A F/R
EN 50266-2-2:2001 Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Procedures. Category A
EN 50266-2-3:2001 Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Procedures. Category B
EN 50266-2-4:2001 Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Procedures. Category C
EN 50266-2-5:2001 Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Procedures. Small cables. Category D
EN 50267-1:1999 Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables. Apparatus
EN 50267-2-1:1999 Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables. Procedures. Determination of the amount of halogen acid gas
EN 50267-2-2:1999 Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables. Procedures.
EN 50267-2-3:1999 Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables. Procedures.
EN 50268-1:2000 Common test methods for cables under fire conditions. Measurement of smoke density of cables burning under defined conditions. Apparatus
EN 50268-2:2000 Common test methods for cables under fire conditions. Measurement of smoke density of cables burning under defined conditions. Procedure
EN 50270:1999 Electromagnetic compatibility. Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
EN 50271:2002 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen. Requirements and tests for apparatus using software and/or digital technologies
EN 50272-2:2001 Safety requirements for secondary batteries and battery installations. Stationary batteries
EN 50272-3:2002 Safety requirements for secondary batteries and battery installations. Traction batteries
EN 50274:2002 Low-voltage switchgear and controlgear assemblies. Protection against electric shock. Protection against unintentional direct contact with hazardous live parts
EN 50281-1-1:1999 Electrical apparatus for use in the presence of combustible dust. Electrical apparatus protected by enclosures. Construction and testing
EN 50281-1-2:1999 Electrical apparatus for use in the presence of combustible dust. Electrical apparatus protected by enclosures. Selection, installation and maintenance
EN 50281-2-1:1999 Electrical apparatus for use in the presence of combustible dust. Test methods. Methods of determining minimum ignition temperatures
EN 50285:1999 Energy efficiency of electric lamps for household use. Measurement methods
EN 50286:2001 Electrical insulating protective clothing for low-voltage installations
EN 50288-1:2003 Multi-element metallic cables used in analogue and digital communication and control. Generic specification
EN 50288-2-1:2003 Multi-element metallic cables used in analogue and digital communication and control. Horizontal and building backbone cables
EN 50288-2-2:2003 Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for screened cables characterized up to 100 MHz.
EN 50288-3-1:2003 Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for unscreened cables characterized up to 100 MHz.
EN 50288-3-2:2003 Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for unscreened cables. Work area and patch cord cables
EN 50288-4-1:2003 Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for screened cables characterized up to 600 MHz. s
EN 50288-4-2:2003 Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for screened cables ch aracterized up to 600 MHz.
EN 50288-5-1:2003 Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for screened cables characterized up to 250 MHz.
EN 50288-5-2:2003 Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for screened cables characterized up to 250 MHz
EN 50288-6-1:2003 Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for unscreened cables characterised up to 250 MHz
EN 50288-6-2:2003 Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for unscreened cables characterised up to 250 MHz
EN 50289-1-1:2001 Communication cables. Specifications for test methods. Electrical test methods. General requirements
EN 50289-1-10:2002 Communication cables. Specifications for test methods. Electrical test methods. Crosstalk
EN 50289-1-11:2002 Communication cables. Specifications for test methods. Electrical test methods. Characteristic impedance, input impedance, return loss
EN 50289-1-13:2004 Communication cables. Specifications for test methods. Electrical test methods
EN 50289-1-14:2004 Communication cables. Specifications for test methods. Electrical test methods
EN 50289-1-15:2004 Communication cables. Specifications for test methods. Electromagnetic performance
EN 50289-1-2:2001 Communication cables. Specifications for test methods. Electrical test methods. DC resistance
EN 50289-1-3:2001 Communication cables. Specifications for test methods. Electrical test methods. Dielectric strength
EN 50289-1-4:2001 Communication cables. Specifications for test methods. Electrical test methods. Insulation resistance
EN 50289-1-5:2001 Communication cables. Specifications for test methods. Electrical test methods. Capacitance
EN 50289-1-6:2002 Communication cables. Specifications for test methods. Electrical test methods. Electromagnetic performance
EN 50289-1-7:2001 Communication cables. Specifications for test methods. Electrical test methods. Velocity of propagation
EN 50289-1-8:2001 Communication cables. Specifications for test methods. Electrical test methods. Attentuation
EN 50289-1-9:2002 Communication cables. Specifications for test methods. Electrical test methods. Unbalance attenuation (longitudinal conversion loss, longitudinal conversion transfer loss)
EN 50289-3-1:2001 Communication cables. Specifications for test methods. Mechanical test methods. General requirements





To receive a price quote for any EN standard, please review our partners on the right


Return To The EN Standards Glossary Index






HOW TO OBTAIN STANDARDS 
To receive a direct quote for any EN standard, please review our partners below.

OTHER INFORMATION





Copyright StandardsDirect. European Standards.