EN 566:1997 -
The StandardsDirect Glossary of European / EN Standards
THE EN STANDARDS GLOSSARY
en standards, European standards
Glossary of BC, ISO, and EN Standards

EN 566:1997 Onwards

Standard No Title of Standard
EN 566:1997 Mountaineering equipment. Slings. Safety requirements and test methods
EN 567:1997 Mountaineering equipment. Rope clamps. Safety requirements and test methods
EN 568:1997 Mountaineering equipment. Ice anchors. Safety requirements and test methods
EN 569:1997 Mountaineering equipment. Pitons. Safety requirements and test methods
EN 570:1995 Aluminium and aluminium alloys. Impact extrusion slugs obtained from wrought products. Specifications
EN 571-1:1997 Non-destructive testing. Penetrant testing. General principles
EN 572-1:2004 Glass in building. Basic soda lime silicate glass products. Definitions and general physical and mechanical properties
EN 572-2:2004 Glass in building. Basic soda lime silicate glass products. Float glass
EN 572-3:2004 Glass in building. Basic soda lime silicate glass products. Polished wire glass
EN 572-4:2004 Glass in building. Basic soda lime silicate glass products. Drawn sheet glass
EN 572-5:2004 Glass in building. Basic soda lime silicate glass products. Patterned glass
EN 572-6:2004 Glass in building. Basic soda lime silicate glass products. Wired patterned glass
EN 572-7:2004 Glass in building. Basic soda lime silicate glass products. Wired or unwired channel shaped glass
EN 572-8:2004 Glass in building. Basic soda lime silicate glass products. Supplied and final cut sizes
EN 572-9:2004 Glass in building. Basic soda lime silicate glass products. Evaluation of conformity/Product standard
EN 573-1:2004 Aluminium and aluminium alloys. Chemical composition and form of wrought products. Numerical designation system
EN 573-2:1995 Aluminium and aluminium alloys. Chemical composition and form of wrought products. Chemical symbol based designation system
EN 573-3:2003 Aluminium and aluminium alloys. Chemical composition and form of wrought products. Chemical composition
EN 573-4:2004 Aluminium and aluminium alloys. Chemical composition and form of wrought products. Forms of products
EN 574:1997 Safety of machinery. Two-hand control devices. Functional aspects. Principles for design
EN 575:1996 Aluminium and aluminium alloys. Master alloys produced by melting. Specifications
EN 576:2003 Aluminium and aluminium alloys. Unalloyed aluminium ingots for remelting. Specifications
EN 577:1996 Aluminium and aluminium alloys. Liquid metal. Specifications
EN 578:1994 Plastics piping systems. Plastics pipes and fittings. Determination of the opacity
EN 579:1994 Plastics piping systems. Crosslinked polyethylene (PE-X) pipes. Determination of degree of crosslinking by solvent extraction
EN 58:2004 Bitumen and bituminous binders. Sampling bituminous binders
EN 580:2003 Plastics piping Systems. Unplasticized poly(vinyl chloride) (PVC-U) pipes. Test methods for the resistance to dichloromethane at a specified temperature (DCMT)
EN 581-1:1997 Outdoor furniture. Seating and tables for camping, domestic and contract use. General safety requirements
EN 581-3:1999 Outdoor furniture. Seating and tables for camping, domestic and contract use. Mechanical safety requirements and test methods for tables
EN 582:1994 Thermal spraying. Determination of tensile adhesive strength
EN 583-1:1999 Non-destructive testing. Ultrasonic examination. General principles
EN 583-2:2001 Non-destructive testing. Ultrasonic examination. Sensitivity and range setting
EN 583-3:1997 Non-destructive testing. Ultrasonic examination. Transmission technique
EN 583-4:2002 Non-destructive testing. Ultrasonic examination. Examination for discontinuities perpendicular to the surface
EN 583-5:2001 Non-destructive testing. Ultrasonic examination. Characterization and sizing of discontinuities
EN 584-1:1995 Non-destructive testing. Industrial radiographic film. Classification of film systems for industrial radiography
EN 584-2:1997 Non-destructive testing. Industrial radiographic film. Control of film processing by means of reference values
EN 586-1:1998 Aluminium and aluminium alloys. Forgings. Technical conditions for inspection and delivery
EN 586-2:1994 Aluminium and aluminium alloys. Forgings. Mechanical properties and additional property requirements
EN 586-3:2001 Aluminium and aluminium alloys. Forgings. Tolerances on dimensions and form
EN 588-1:1997 Fibre-cement pipes for sewers and drains. Pipes, joints and fittings for gravity systems
EN 588-2:2001 Fibre-cement pipes for sewers and drains. Manholes and inspection chambers
EN 589:2004 Automotive fuels. LPG. Requirements and test methods
EN 590:2004 Automotive fuels. Diesel. Requirements and test methods
EN 591:2001 Instructions for use for in vitro diagnostic instruments for professional use
EN 592:2002 Instructions for use for in vitro diagnostic instruments for self-testing
EN 593:2004 Industrial valves. Metallic butterfly valves
EN 594:1996 Timber structures. Test methods. Racking strength and stiffness of timber frame wall panels
EN 595:1995 Timber structures. Test methods. Test of trusses for the determination of strength and deformation behaviour
EN 596:1995 Timber structures. Test methods. Soft body impact test of timber framed walls
EN 597-1:1995 Furniture. Assessment of the ignitability of mattresses and upholstered bed bases. Ignition source: smouldering cigarette
EN 597-2:1995 Furniture. Assessment of the ignitability of mattresses and upholstered bed bases. Ignition source: match flame equivalent
EN 598:1995 Ductile iron pipes, fittings, accessories and their joints for sewerage applications. Requirements and test methods
EN 599-1:1997 Durability of wood and wood-based products. Performance of preservatives as determined by biological tests. Specification according to hazard class
EN 599-2:1997 Durability of wood and wood-based products. Performance of preservatives as determined by biological tests. Classification and labelling
EN 600:1996 Natural rubber latex male condoms
EN 60034-1:1998 Rotating electrical machines. Rating and performance
EN 60034-11:2004 Rotating electrical machines. Thermal protection
EN 60034-12:2002 Rotating electrical machines. Starting performance of single-speed three-phase cage induction motors
EN 60034-14:1998 Rotating electrical machines. Mechanical vibration of certain machines with shaft heights 56 mm and higher. Measurement, evaluation and limits of vibration
EN 60034-14:2004 Rotating electrical machines. Mechanical vibration of certain machines with shaft heights 56mm and higher. Measurement, evaluation and limits of the vibration severity
EN 60034-15:1996 Rotating electrical machines. Impulse voltage withstand levels of rotating a.c. machines with form-wound stator coils
EN 60034-16-1:1996 Rotating electrical machines. Excitation systems for synchronous machines. Definitions
EN 60034-18-1:1994 Rotating electrical machines. Functional evaluation of insulation systems. General guidelines
EN 60034-18-21:1994 Rotating electrical machines. Functional evaluation of insulation systems. Test procedures for wire-wound windings. Thermal evaluation and classification.
EN 60034-18-22:2001 Rotating electrical machines. Functional evaluation of insulation systems. Test procedures for wire-wound windings. Classification of changes and insulation component substitutions
EN 60034-18-31:1994 Rotating electrical machines. Functional evaluation of insulation systems. Test procedures for form-wound windings.
EN 60034-2:1999 Rotating electrical machines. Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles)
EN 60034-22:1998 Rotating electrical machines. A.C. generators for reciprocating internal combustion (RIC) engine driven generating sets
EN 60034-3:1996 Rotating electrical machines. Specific requirements for turbine-type synchronous machines
EN 60034-4:1995 Rotating electrical machines. Methods for determining synchronous machine quantities from tests
EN 60034-5:2001 Rotating electrical machines. Degrees of protection provided by the integral design of rotating electrical machines (IP code). Classification
EN 60034-6:1994 Rotating electrical machines. Methods of cooling (IC Code)
EN 60034-7:1993 Rotating electrical machines. Classification of types of constructions and mounting arrangements (IM Code)
EN 60034-8:2002 Rotating electrical machines. Terminal markings and direction of rotation
EN 60034-9:1998 Rotating electrical machines. Noise limits
EN 60041:1995 Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines
EN 60044-1:1999 Instrument transformers. Current transformers
EN 60044-2:1999 Instrument transformers. Inductive voltage transformers
EN 60044-3:2003 Instrument transformers. Combined transformers
EN 60044-5:2004 Instrument transformers. Capacitor voltage transformers
EN 60044-6:1999 Instrument transformers. Requirements for protective current transformers for transient performance
EN 60044-7:2000 Instrument transformers. Electronic voltage transformers
EN 60044-8:2002 Instrument transformers. Electronic current transformers
EN 60045-1:1993 Guide to steam turbine procurement. Guide to steam turbine procurement
EN 60051-1:1999 Direct acting indicating analogue electrical measuring instruments and their accessories. Definitions and general requirements common to all parts
EN 60052:2002 Voltage measurement by means of standard air gaps
EN 60059:1999 IEC standard current ratings
EN 60060-2:1995 High-voltage test techniques. Measuring systems
EN 60061-1:1997 Specification for lamp caps and holders together with gauges for the control of interchangeability and safety. Lamps caps
EN 60061-2:1997 Specification for lamp caps and holders together with gauges for the control of interchangeability and safety. Lampholders
EN 60061-3:1997 Lamps caps and holders together with gauges for the control of interchangeability and safety. Gauges
EN 60061-4:1992 Specification for lamp caps and holders together with gauges for the control of interchangeability and safety. Guidelines and general information
EN 60062:1994 Marking codes for resistors and capacitors
EN 60064:1996 Tungsten filament lamps for domestic and similar general lighting purposes. Performance requirements
EN 60065:1998 Audio, video and similar electronic apparatus. Safety requirements
EN 60065:2002 Audio, video and similar electronic apparatus. Safety requirements
EN 60068-1:1995 Environmental testing. General and guidance
EN 60068-2-1:1993 Environmental testing. Test methods. Tests A. Cold
EN 60068-2-11:1999 Environmental testing. Test methods. Tests. Test KA. Salt mist
EN 60068-2-13:1999 Environmental testing. Test methods. Tests. Test M. Low air pressure
EN 60068-2-14:2000 Environmental testing. Test methods. Test N. Change of temperature
EN 60068-2-17:1995 Environmental testing. Test methods. Test Q. Sealing
EN 60068-2-18:2001 Environmental testing. Test methods. Tests R and guidance. Water
EN 60068-2-2:1993 Environmental testing. Test methods. Tests B. Dry heat
EN 60068-2-21:1997 Environmental testing. Test methods. Test U. Robustness of terminations and integral mounting devices
EN 60068-2-21:1999 Environmental testing. Test methods. Test U. Robustness of terminations and integral mounting devices
EN 60068-2-27:1993 Environmental testing. Test methods. Environmental testing procedures. Tests. Test Ea and guidance. Shock
EN 60068-2-29:1993 Environmental testing. Test methods. Environmental testing procedures. Tests. Test Eb and guidance. Bump
EN 60068-2-30:1999 Environmental testing. Test methods. Test Db and guidance: damp heat, cyclic (12 + 12 hour cycle)
EN 60068-2-31:1993 Environmental testing. Test methods. Test Ec. Drop and topple, primarily for equipment-type specimens
EN 60068-2-32:1993 Environmental testing. Test methods. Test Ed. Free fall
EN 60068-2-33:2000 Environmental testing. Test methods. Guidance on change of temperature tests
EN 60068-2-38:1999 Environmental testing. Test methods. Tests. Test Z/AD:composite temperature/humidity cyclic test
EN 60068-2-39:1999 Environmental testing. Test methods. Tests. Test Z/AMD. Combined sequential cold, low air pressure and damp heat test





To receive a price quote for any EN standard, please review our partners on the right


Return To The EN Standards Glossary Index






HOW TO OBTAIN STANDARDS 
To receive a direct quote for any EN standard, please review our partners below.

OTHER INFORMATION





Copyright StandardsDirect. European Standards.