EN 60127-4:1998 -
The StandardsDirect Glossary of European / EN Standards
THE EN STANDARDS GLOSSARY
en standards, European standards
Glossary of BC, ISO, and EN Standards

EN 60127-4:1998 Onwards

Standard No Title of Standard
EN 60127-4:1998 Miniature fuses. Universal modular fuse-links (UMF)
EN 60127-5:1991 Miniature fuses. Guide for the quality assessment of miniature fuse-links
EN 60127-6:1994 Miniature fuses. Fuse-holders for miniature cartridge fuse-links
EN 60130-17:1999 Connectors for frequencies below 3 MHz. Detail specification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries
EN 60130-9:2001 Connectors for frequencies below 3 MHz. Circular connectors for radio and associated sound equipment
EN 60133:2001 Dimensions of pot-cores made of magnetic oxides and associated parts
EN 60137:1996 Insulated bushings for alternating voltages above 1 kV
EN 60137:2003 Insulated bushings for alternating voltages above 1000 V
EN 60139:2001 Preparation of outline drawings for cathode-ray tubes, their components, connections and gauges
EN 60143-1:1993 Series capacitors for power systems. General. Performance, testing and rating. Safety requirements. Guide for installation
EN 60143-2:1995 Series capacitors for power systems. Protective equipment for series capacitor banks
EN 60143-3:1998 Series capacitors for power systems. Internal fuses
EN 60146-1-1:1993 Semiconductor convertors. General requirements and line commutated convertors. Specifications of basic requirements
EN 60146-1-3:1993 Semiconductor convertors. General requirements and line commutated convertors. Transformers and reactors
EN 60146-2:2000 Semiconductor convertors. General requirements and line commutated convertors. Self-commutated semiconductor converters including direct d.c. converters
EN 60154-1:1996 Flanges for waveguides. General requirements
EN 60154-2:1997 Flanges for waveguides. Relevant specifications for flanges for ordinary rectangular waveguides
EN 60155:1995 Glow-starters for fluorescent lamps
EN 60156:1996 Insulating liquids. Determination of the breakdown voltage at power frequency. Test method
EN 60168:1995 Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000V
EN 60169-21:1997 Radio-frequency connectors. Two types of radio-frequency connectors with inner diameter of outer conductor 9,5 mm (0,374 in) with different versions of screw coupling.
EN 60169-23:1994 Radio-frequency connectors. Pin and socket connector for use with 3,5 mm rigid precision coaxial lines with inner diameter of outer conductor 3,5 mm (0,1378 in)
EN 60169-24:1994 Radio-frequency connectors. Radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (Type F)
EN 60169-25:1994 Radio-frequency connectors. Two-pole screw ($9L-20 UNEF) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor
EN 60172:1996 Test procedure for the determination of the temperature index of enamelled winding wires
EN 60182-2:1991 Basic dimensions of winding wires. Specification for maximum overall diameters of enamelled round winding wires
EN 60188:2001 High-pressure mercury vapour lamps. Performance specifications
EN 60191-3:2000 Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of integrated circuits
EN 60191-4:2000 Mechanical standardization of semiconductor devices. Coding system and classification into forms of package outlines for semiconductor device packages
EN 60191-6:2004 Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packages
EN 60191-6-1:2001 Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packages
EN 60191-6-10:2003 Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packages
EN 60191-6-12:2002 Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packages
EN 60191-6-2:2002 Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packages
EN 60191-6-3:2001 Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packages
EN 60191-6-4:2003 Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packages
EN 60191-6-5:2001 Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packages
EN 60191-6-6:2001 Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packages
EN 60191-6-8:2001 Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packages
EN 60192:2001 Low pressure sodium vapour lamps. Performance specification
EN 602:2004 Aluminium and aluminium alloys. Wrought products. Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff
EN 60204-1:1993 Safety of machinery. Electrical equipment of machines. Specification for general requirements
EN 60204-1:1998 Safety of machinery. Electrical equipment of machines. General requirements
EN 60204-11:2001 Safety of machinery. Electrical equipment of machines. Requirements for HV equipment for voltages above 1000 V a.c. or 1500 V d.c. and not exceeding 36 kV
EN 60204-31:1998 Safety of machinery. Electrical equipment of machines. Particular safety and EMC requirements for sewing machines, units and systems
EN 60204-32:1998 Safety of machinery. Electrical equipment of machines. Requirements for hoisting machines
EN 60205:2001 Calculation of the effective parameters of magnetic piece parts
EN 60214:1998 On-load tap-changers
EN 60214-1:2003 Tap-changers. Performance requirements and test methods
EN 60215:1996 Safety requirements for radio transmitting equipment
EN 60216-1:2002 Guide for the determination of thermal endurance properties of electrical insulating materials. Ageing procedures and evaluation of test results
EN 60216-3:2002 Electrical insulating materials. Thermal endurance properties. Instructions for calculating thermal endurance characteristics
EN 60216-4-2:2001 Guide for the determination of thermal endurance properties of electrical insulating materials. Electrical insulating materials. Thermal endurance properties.
EN 60216-4-3:2000 Guide for the determination of thermal endurance properties of electrical insulating materials. Electrical insulating materials. Thermal endurance properties. Ageing ovens. Multi-chamber ovens
EN 60216-5:2003 Electrical insulating materials. Thermal endurance properties. Determination of relative thermal endurance index (RTE) of an insulating material
EN 60216-6:2004 Electrical insulating materials. Thermal endurance properties. Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method
EN 60228:2005 Conductors of insulated cables
EN 60230:2002 Impulse tests on cables and their accessories
EN 60238:1999 Edison screw lampholders
EN 60238:2004 Edison screw lampholders
EN 60239:1997 Nominal dimensions of cylindrical machined graphite electrodes with threaded sockets and nipples for use in electric arc furnaces
EN 60240-1:1994 Characteristics of electric infra-red emitters for industrial heating. Short wave infra-red emitters
EN 60243-1:1998 Methods of test for electric strength of solid insulating materials. Tests at power frequencies
EN 60243-2:2001 Methods of test for electric strength of solid insulating materials. Additional requirements for tests using direct voltage
EN 60243-3:2002 Methods of test for electric strength of solid insulating materials. Additional requirements for 1,2/50 $Gms impulse tests
EN 60244-1:2000 Methods of measurement for radio transmitters. General characteristics for broadcast transmitters
EN 60244-10:1993 Methods of measurement for radio transmitters. Methods of measurement for television transmitters and transposers employing insertion test signals
EN 60244-11:1993 Methods of measurement for radio transmitters. Transposers for FM sound broadcasting
EN 60244-12-1:1994 Methods of measurement for radio transmitters. Guideline for drawing up descriptive leaflets for transmitters and transposers for sound and television broadcasting.
EN 60244-12-2:1994 Methods of measurement for radio transmitters. Guideline for drawing up descriptive leaflets for transmitters and transposers for sound and television broadcasting. Specification sheets
EN 60244-13:1993 Methods of measurement for radio transmitters. Performance characteristics for FM sound broadcasting
EN 60244-14:1997 Methods of measurement for radio transmitters. External intermodulation products caused by two or more transmitters using the same or adjacent antennas
EN 60244-15:2000 Methods of measurement for radio transmitters. Amplitude-modulated transmitters for sound broadcasting
EN 60244-5:1995 Methods of measurement for radio transmitters. Performance characteristics of television transmitters
EN 60244-8:1995 Methods of measurement for radio transmitters. Performance characteristics of vestigial-sideband demodulators used for testing television transmitters and transposers
EN 60244-9:1995 Methods of measurement for radio transmitters. Performance characteristics for television transposers
EN 60247:2004 Insulating liquids. Measurement of relative permittivity, dielectric dissipation factor (tan $Gd) and d.c. resistivity
EN 60249-1:1993 Base materials for printed circuits. Base materials for printed circuits. Test methods
EN 60249-2-1:1994 Specifications. Specification for phenolic cellulose paper copper-clad laminated sheet, high electrical quality
EN 60249-2-10:1994 Specifications. Epoxide non-woven/woven glass reinforced copper-clad laminated sheet of defined flammability (vertical burning test)
EN 60249-2-11:1994 Specifications. Specification for thin epoxide woven glass fabric copper-clad laminated sheet, general purpose grade, for use in the fabrication of multilayer printed boards
EN 60249-2-12:1994 Specifications. Thin epoxide woven glass fabric copper-clad laminated sheet of defined flammability, for use in the fabrication of multilayer printed boards
EN 60249-2-13:1994 Base material for printed circuits. Specifications. Flexible copper-clad polyimide film, general purpose grade
EN 60249-2-14:1994 Specifications. Phenolic cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test), economic quality
EN 60249-2-15:1994 Specifications. Flexible copper-clad polyimide film, of defined flammability
EN 60249-2-16:1993 Specifications. Specification No. 16. Polyimide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test)
EN 60249-2-17:1993 Specifications. Specification No. 17. Thin polyimide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printed boards
EN 60249-2-18:1993 Specifications. Specification No. 18. Bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test)
EN 60249-2-19:1993 Specifications. Specification No. 19. Thin bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of defined flammability
EN 60249-2-2:1994 Specifications. Specification for phenolic cellulose paper copper-clad laminated sheet, economic quality
EN 60249-2-3:1994 Specifications. Metal-clad base materials for printed wiring boards. Copper-clad base material. Specification for epoxide cellulose paper copper-clad laminated sheet of defined flammability
EN 60249-2-4:1994 Specifications. Specification for epoxide woven glass fabric copper-clad laminated sheet, general purpose grade
EN 60249-2-5:1994 Specifications. Specification No 5. Epoxide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test)
EN 60249-2-6:1994 Specifications. Specification No.6. Phenolic cellulose paper copper-clad laminated sheet of defined flammability (horizontal burning test)
EN 60249-2-7:1994 Specifications. Specification No.7. Phenolic cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test)
EN 60249-2-8:1995 Specifications. Specification for flexible copper-clad polyester (PETP) film
EN 60249-2-9:1994 Specifications. Epoxide cellulose paper core, epoxide glass cloth surfaces copper-clad laminated sheet of defined flammability (vertical burning test)
EN 60252-1:2001 A.C. motor capacitors. General. Performance, testing and rating. Safety requirements. Guide for installation and operation
EN 60252-2:2003 A.C. motor capacitors. Motor start capacitors
EN 60254-1:1997 Lead-acid traction batteries. General requirements and methods of test
EN 60254-2:1997 Lead-acid traction batteries. Dimensions of cells and terminals and marking of polarity on cells
EN 60255-21-1:1996 Electrical relays. Vibration, shock, bump and seismic tests on measuring relays and protection equipment. Vibration tests (sinusoidal)
EN 60255-21-2:1996 Electrical relays. Vibration, shock, bump and seismic tests on measuring relays and protection equipment. Shock and bump tests
EN 60255-21-3:1995 Electrical relays. Vibration, shock, bump and seismic tests on measuring relays and protection equipment. Seismic tests
EN 60255-22-2:1997 Electrical relays. Electrical disturbance tests for measuring relays and protection equipment. Electrostatic discharge tests
EN 60255-22-3:2001 Electrical relays. Electrical disturbance tests for measuring relays and protection equipment. Radiated electromagnetic field disturbance tests
EN 60255-22-4:2002 Electrical relays. Electrical disturbance tests for measuring relays and protection equipment. Electrical fast transient/burst immunity test
EN 60255-22-5:2002 Electrical relays. Electrical disturbance tests for measuring relays and protection equipment. Surge immunity test
EN 60255-22-6:2001 Electrical relays. Electrical disturbance tests for measuring relays and protection equipment. Immunity to conducted disturbances induced by radio frequency fields
EN 60255-22-7:2003 Electrical relays. Electrical disturbance tests for measuring relays and protection equipment. Power frequency immunity tests
EN 60255-23:1997 Electrical relays. Contact performance
EN 60255-24:2001 Electrical relays. Common format for transient data exchange (COMTRADE) for power systems
EN 60255-25:2000 Electrical relays. Electromagnetic emission tests for measuring relays and protection equipment
EN 60255-26:2005 Electrical relays. Electromagnetic compatibility requirements for measuring relays and protection equipment
EN 60255-3:1998 Electrical relays. Single input energizing quantity measuring relays with dependent or independent time





To receive a price quote for any EN standard, please review our partners on the right


Return To The EN Standards Glossary Index






HOW TO OBTAIN STANDARDS 
To receive a direct quote for any EN standard, please review our partners below.

OTHER INFORMATION





Copyright StandardsDirect. European Standards.