EN 60495:1994 -
The StandardsDirect Glossary of European / EN Standards
THE EN STANDARDS GLOSSARY
en standards, European standards
Glossary of BC, ISO, and EN Standards

EN 60495:1994 Onwards

Standard No Title of Standard
EN 60495:1994 Single sideband power-line carrier terminals
EN 60503:1998 Spools for broadcast videotape recorders (VTRS)
EN 60505:2004 Evaluation and qualification of electrical insulation systems
EN 60507:1993 Artificial pollution tests on high-voltage insulators to be used on a.c. systems
EN 60510-2-5:1996 Methods of measurement for radio equipment used in satellite earth stations. Measurements for sub-systems. Frequency modulators
EN 60510-2-6:1996 Methods of measurement for radio equipment used in satellite earth stations. Measurements for sub-systems. Frequency demodulators
EN 60510-3-4:1996 Methods of measurement for radio equipment used in satellite earth stations. Methods of measurement on combinations of sub-systems.
EN 60512-1:2001 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. General
EN 60512-10-4:2003 Connectors for electronic equipment. Tests and measurements. Test 10d. Electrical overload (connectors)
EN 60512-1-1:2002 Connectors for electronic equipment. Tests and measurements. General. Test 1a. Visual examination
EN 60512-1-100:2001 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. General. General. Applicable publications
EN 60512-11-1:1999 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Climatic tests. Test 11a. Climatic sequence
EN 60512-11-10:2002 Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11j. Cold
EN 60512-11-11:2002 Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11k. Low air pressure
EN 60512-11-12:2002 Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11m. Damp heat, cyclic
EN 60512-11-13:2002 Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11n. Gas tightness, solderless wrapped connections
EN 60512-11-14:2003 Connectors for electronic equipment. Tests and measurements. Climatic tests. Flowing single gas corrosion test
EN 60512-11-2:2002 Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11b. Combined/sequential cold, low air pressure and damp heat
EN 60512-11-3:2002 Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11c. Damp heat, steady state
EN 60512-11-4:2002 Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11d. Rapid change of temperature
EN 60512-11-5:2002 Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11e. Mould growth
EN 60512-11-6:2002 Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11f. Corrosion, salt mist
EN 60512-11-7:2003 Connectors for electronic equipment. Tests and measurements. Flowing mixed gas corrosion test
EN 60512-11-8:1999 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Climatic tests. Test 11h. Sand and dust
EN 60512-11-9:2002 Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11i. Dry heat
EN 60512-1-2:2002 Connectors for electronic equipment. Tests and measurements. General. Test 1b. Examination of dimension and mass
EN 60512-12-6:1997 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Soldering tests. Test 12f.
EN 60512-12-7:2001 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Soldering tests. Test 12g. Solderability, wetting balance method
EN 60512-1-3:1997 Connectors for electronic equipment. Tests and measurements. General. Test 1c. Electrical engagement length
EN 60512-13-1:1997 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Mechanical operating tests. Test 13a. Engaging and separating forces
EN 60512-1-4:1997 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. General. Test 1d. Contact protection effectiveness (scoop-proof)
EN 60512-14-7:1998 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Sealing tests. Test 14g. Impacting water
EN 60512-15-8:1997 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Mechanical tests on contacts and terminations. Test 15h.
EN 60512-16-20:1997 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Mechanical tests on contacts and terminations. Test 16t.
EN 60512-19-3:1998 Connectors for electronic equipment. Tests and measurements. Chemical resistance tests. Fluid resistance
EN 60512-20-2:2001 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Test 20b. Flammability tests. Fireproofness
EN 60512-2-1:2002 Connectors for electronic equipment. Tests and measurements. Electrical continuity and contact resistance tests. Test 2a. Contact resistance. Millivolt level method
EN 60512-2-2:2003 Connectors for electronic equipment. Tests and measurements. Electrical continuity and contact resistance tests. Test 2b. Contact resistance. Specified test current method
EN 60512-2-3:2002 Connectors for electronic equipment. Tests and measurements. Electrical continuity and contact resistance tests. Test 2c. Contact resistance variation
EN 60512-23-3:2001 Connectors for electronic equipment. Tests and measurements. Test 23c. Shielding effectiveness of connectors and accessories
EN 60512-23-4:2001 Screening and filtering tests. Test 23d: Transmission line reflections in the time domain
EN 60512-23-7:2005 Connectors for electronic equipment. Tests and measurements. Screening and filtering tests. Test 23g. Effective transfer impedance of connectors
EN 60512-2-5:2003 Connectors for electronic equipment. Tests and measurements. Test 2e. Contact disturbance
EN 60512-25-1:2001 Connectors for electronic equipment. Test and measurements. Test 25a. Crosstalk ratio
EN 60512-25-2:2002 Connectors for electronic equipment. Tests and measurements. Test 25b. Attenuation (insertion loss)
EN 60512-25-3:2001 Connectors for electronic equipment. Test and measurements. Test 25c. Rise time degradation
EN 60512-25-4:2001 Connectors for electronic equipment. Test and measurements. Test 25d. Propagation delay
EN 60512-25-5:2004 Connectors for electronic equipment. Tests and measurements. Test 25e. Return loss
EN 60512-25-6:2004 Connectors for electronic equipment. Tests and measurements. Test 25f. Eye pattern and jitter
EN 60512-25-7:2005 Connectors for electronic equipment. Tests and measurements. Test 25g. Impedance, reflection coefficient and voltage standing wave ratio (VSWR)
EN 60512-2-6:2002 Connectors for electronic equipment. Tests and measurements. Electrical continuity and contact resistance tests. Test 2f. Housing (shell) electrical continuity
EN 60512-3-1:2002 Connectors for electronic equipment. Tests and measurements. Insulation tests. Test 3a. Insulation resistance
EN 60512-4-1:2003 Connectors for electronic equipment. Tests and measurements. Voltage stress tests. est 4a. Voltage proof
EN 60512-4-2:2002 Connectors for electronic equipment. Tests and measurements. Voltage stress tests. Test 4b. Partial discharge
EN 60512-4-3:2002 Connectors for electronic equipment. Tests and measurements. Voltage stress tests. Test 4c. Voltage proof of pre-insulated crimp barrels
EN 60512-5-1:2002 Connectors for electronic equipment. Tests and measurements. Current-carrying capacity tests. Test 5a. Temperature rise
EN 60512-5-2:2002 Connectors for electronic equipment. Tests and measurements. Current-carrying capacity tests. Test 5b. Current-temperature derating
EN 60512-6-1:2002 Connectors for electronic equipment. Tests and measurements. Dynamic stress tests. Test 6a. Acceleration, steady state
EN 60512-6-2:2002 Connectors for electronic equipment. Tests and measurements. Dynamic stress tests. Test 6b. Bump
EN 60512-6-3:2002 Connectors for electronic equipment. Tests and measurements. Dynamic stress tests. Test 6c. Shock
EN 60512-6-4:2002 Connectors for electronic equipment. Tests and measurements. Dynamic stress tests. Test 6d. Vibration (sinusoidal)
EN 60512-6-5:2001 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Dynamic stress tests. Test 6e. Random vibration
EN 60514:1995 Acceptance inspection of class 2 alternating-current watthour meters
EN 60517:1997 Gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above
EN 60519-1:2003 Safety in electroheat installations. General requirements
EN 60519-11:1997 Safety in electroheat installations. Particular requirements for installations for electromagnetic stirring, transport or pouring of metal liquids
EN 60519-2:1994 Safety in electroheat installations. Particular requirements for resistance heating equipment
EN 60519-21:1998 Safety in electroheat installations. Particular requirements for resistance heating equipment. Heating and melting glass equipment
EN 60519-3:1996 Safety in electroheat installations. Particular requirements for induction and conduction heating and induction melting installations
EN 60519-4:1997 Safety in electroheat installations. Particular requirements for arc furnace installations
EN 60519-6:2002 Safety in electroheat installations. Specifications for safety in industrial microwave heating equipment
EN 60519-9:1996 Safety in electroheat installations. Particular requirements for high-frequency dielectric heating installations
EN 60521:1995 Class 0.5, 1 and 2 alternating-current watthour meters
EN 60522:1999 Determination of the permanent filtration of X-ray tube assemblies
EN 60523:1993 Direct-current potentiometers
EN 60524:1993 Direct-current resistive volt ratio boxes
EN 60526:2004 High-voltage cable plug and socket connections for medical X-ray equipment
EN 60529:1992 Specification for degrees of protection provided by enclosures (IP code)
EN 60531:2000 Household electric thermal storage room heaters. Methods for measuring performance
EN 60534-1:2005 Industrial-process control valves. Control valve terminology and general considerations
EN 60534-2-1:1999 Industrial-process control valves. Flow capacity. Flow capacity. Sizing equations for fluid flow under installed conditions
EN 60534-2-3:1998 Industrial-process control valves. Flow capacity. Test procedures
EN 60534-2-5:2003 Industrial-process control valves. Flow capacity. Sizing equations for fluid flow through multistage control valves with interstage recovery
EN 60534-3-1:2000 Industrial-process control valves. Dimensions. Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions
EN 60534-3-2:2001 Industrial-process control valves. Dimensions. Face-to-face dimensions for rotary control valves except butterfly valves
EN 60534-3-3:1998 Industrial-process control valves. Dimensions. End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves
EN 60534-5:2004 Industrial-process control valves. Marking
EN 60534-6-1:1998 Industrial-process control valves. Mounting details for attachment of positioners to control valves. Positioner mounting on linear actuators
EN 60534-6-2:2001 Industrial-process control valves. Mounting details for attachment of positioners to control valves. Positioner mounting on rotary actuators
EN 60534-8-1:2001 Industrial-process control valves. Noise considerations. Laboratory measurement of noise generated by aerodynamic flow through control valves
EN 60534-8-2:1993 Industrial-process control valves. Noise considerations. Laboratory measurement of noise generated by hydrodynamic flow through control valves
EN 60534-8-3:2000 Industrial-process control valves. Noise considerations. Control valve aerodynamic noise prediction method
EN 60534-8-4:1994 Industrial-process control valves. Noise considerations. Prediction of noise generated by hydrodynamic flow
EN 60539-1:2002 Directly heated negative temperature coefficient thermistors. Generic specification
EN 60539-2:2004 Directly heated negative temperature coefficient thermistors. Sectional specification. Surface mount negative temperature coefficient thermistors
EN 60544-1:1995 Electrical insulating materials. Determination of the effects of ionizing radiation. Radiation interaction and dosimetry
EN 60544-4:2003 Electrical insulating materials. Determination of the effects of ionizing radiation. Classification system for service in radiation environments
EN 60544-5:2003 Electrical insulating materials. Determination of the effects of ionizing radiation. Procedures for assessment of ageing in service
EN 60546-1:1993 Controllers with analogue signals for use in industrial-process control systems. Controllers with analogue signals for use in industrial-process control systems.
EN 60546-2:1993 Controllers with analogue signals for use in industrial-process control systems. Guidance for inspection and routine testing
EN 60554-2:2002 Cellulosic papers for electrical purposes. Methods of test
EN 60564:1993 D.C. bridges for measuring resistance
EN 60567:1993 Guide for the sampling of gases and of oil from oil-filled electrical equipment and for the analysis of free and dissolved gases
EN 60570:1997 Electrical supply track systems for luminaires
EN 60570:2003 Electrical supply track systems for luminaires
EN 60570-2-1:1995 Electrical supply track systems for luminaires. Mixed supply systems. Classes I and III
EN 60574-21:1994 Specification for audiovisual, video and television equipment and systems. Video tape leader and trailer for education and training applications
EN 60580:2000 Dose area product meters
EN 60584-1:1996 Thermocouples. Reference tables
EN 60584-2:1993 Thermocouples. Tolerances
EN 60598-1:1997 Luminaires. General requirements and tests
EN 60598-1:2000 Luminaires. General requirements and tests
EN 60598-1:2004 Luminaires. General requirements and tests
EN 60598-2-10:2003 Luminaires. Particular requirements. Portable luminaires for children
EN 60598-2-18:1994 Luminaires. Particular requirements. Luminaires for swimming pools and similar applications





To receive a price quote for any EN standard, please review our partners on the right


Return To The EN Standards Glossary Index






HOW TO OBTAIN STANDARDS 
To receive a direct quote for any EN standard, please review our partners below.

OTHER INFORMATION





Copyright StandardsDirect. European Standards.