EN 61247:1997 -
The StandardsDirect Glossary of European / EN Standards
THE EN STANDARDS GLOSSARY
en standards, European standards
Glossary of BC, ISO, and EN Standards

EN 61247:1997 Onwards

Standard No Title of Standard
EN 61247:1997 PM-cores made of magnetic oxides and associated parts. Dimensions
EN 61248-1:1997 Transformers and inductors for use in electronic and telecommunication equipment. Generic specification
EN 61248-2:1997 Transformers and inductors for use in electronic and telecommunication equipment. Sectional specification for signal transformers on the basis of the capability approval procedure
EN 61248-3:1997 Transformers and inductors for use in electronic and telecommunication equipment. Sectional specification for power transformers on the basis of the capability approval procedure
EN 61248-4:1997 Transformers and inductors for use in electronic and telecommunication equipment.
EN 61248-5:1997 Transformers and inductors for use in electronic and telecommunication equipment. Sectional specification for pulse transformers on the basis of the capability approval procedure
EN 61248-6:1997 Transformers and inductors for use in electronic and telecommunication equipment. Sectional specification for inductors on the basis of the capability approval procedure
EN 61248-7:1998 Transformers and inductors for use in electronic and telecommunication equipment.
EN 61249-2-10:2003 Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad.
EN 61249-2-11:2003 Materials for printed boards and other interconnecting structures. Reinforced base materials, clad and unclad
EN 61249-2-12:1999 Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad. Epoxide non-woven aramid laminate of defined flammability, copper-clad
EN 61249-2-13:1999 Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad.
EN 61249-2-18:2002 Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad.
EN 61249-2-19:2002 Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad.
EN 61249-2-21:2003 Materials for printed boards and other interconnecting structures. Reinforced base materials, clad and unclad
EN 61249-2-4:2002 Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad.
EN 61249-2-5:2003 Materials for printed boards and other interconnecting structures. Reinforced base materials, clad and unclad
EN 61249-2-6:2003 Materials for printed boards and other interconnecting structures. Reinforced base materials, clad and unclad
EN 61249-2-7:2002 Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad.
EN 61249-2-8:2003 Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad.
EN 61249-2-9:2003 Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad.
EN 61249-3-3:1999 Materials for interconnection structures. Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards).
EN 61249-3-4:1999 Materials for interconnection structures. Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards).
EN 61249-3-5:1999 Materials for interconnection structures. Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards).
EN 61249-5-1:1996 Materials for interconnection structures. Sectional specification set for conductive foils and films with and without coatings. Copper foils (for the manufacture of copper-clad base materials)
EN 61249-5-4:1997 Materials for interconnection structures. Sectional specification set for conductive foils and films with and without coatings. Conductive inks
EN 61249-7-1:1996 Materials for interconnection structures. Sectional specification set for restraining core materials. Copper/invar/copper
EN 61249-8-7:1997 Materials for interconnection structures. Sectional specification set for non-conductive films and coatings. Marking legend inks
EN 61249-8-8:1997 Materials for interconnection structures. Sectional specification set for non-conductive films and coatings. Temporary polymer coatings
EN 61252:1997 Electroacoustics. Specifications for personal sound exposure meters
EN 61254:1994 Electric shavers for household use. Methods for measuring the performance
EN 61255:1995 Household electric heating pads. Methods for measuring performance
EN 61260:1996 Electroacoustics. Octave-band and fractional-octave-band filters
EN 61262-1:1995 Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment. Determination of the entrance field size
EN 61262-2:1995 Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment. Determination of the conversion factor
EN 61262-3:1995 Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment. Determination of the luminance distribution and luminance non-uniformity
EN 61262-4:1995 Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment. Determination of the image distortion
EN 61262-5:1995 Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment. Determination of the detective quantum efficiency
EN 61262-6:1995 Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment. Determination of the contrast ratio and veiling glare index
EN 61262-7:1996 Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment. Determination of the modulation transfer function
EN 61264:1999 Ceramic pressurized hollow insulators for high-voltage switchgear and controlgear
EN 61265:1995 Electroacoustics. Instruments for measurement of aircraft noise.
EN 61266:1995 Ultrasonics. Hand-held probe Doppler foetal heartbeat detectors. Performance requirements and methods of measurement and reporting
EN 61267:1995 Radiation conditions for use in the determination of characteristics for medical diagnostic X-ray equipment
EN 61268:1996 Alternating current static var-hour meters for reactive energy (classes 2 and 3)
EN 61269-1:1997 Fibre optic terminus sets. Generic specification
EN 61269-1-1:1997 Fibre optic terminus sets. Blank detail specification
EN 61270-1:1998 Capacitors for microwave ovens. General
EN 61274-1:1997 Fibre optic adaptors. Generic specification
EN 61274-1-1:1997 Fibre optic adaptors. Blank detail specification
EN 61277:1998 Terrestial photovoltaic (PV) power generating systems. General and guide
EN 61280-1-1:1998 Optical fibre amplifiers.Basic spectrum analyzers. Transmitter output optical power measurement for single-mode optical fibre cable
EN 61280-1-3:1999 Fibre optic communication subsystem basic test procedures. Test procedures for general communication subsystems. Central wavelength and spectral width measurement
EN 61280-1-4:2003 Fibre optic communication subsystem basic test procedures. Test procedures for general communication subsystems.
EN 61280-2-1:1999 Fibre optic communication subsystem basic test procedures. Test procedures for digital systems. Receiver sensitivity and overload measurement
EN 61280-2-2:1999 Fibre optic communication subsystem basic test procedures. Test procedures for digital systems. Optical eye pattern, waveform, and extinction ratio
EN 61280-2-4:1998 Fibre optic communication subsystem basic test procedures. Test procedures for digital systems. Bit-rate tolerance measurement
EN 61280-2-5:1998 Fibre optic communication subsystem basic test procedures. Test procedures for digital systems. Jitter transfer function measurement
EN 61280-2-8:2003 Fibre optic communication subsystem basic test procedures. Test procedures for digital systems. Determination of low BER using Q-factor measurements
EN 61280-2-9:2002 Fibre optic communication subsystem basic test procedures. Test procedures for digital systems.
EN 61280-4-1:2004 Fibre-optic communication subsystem test procedures. Cable plant and links. Multimode fibre optic cable plant attenuation measurement
EN 61280-4-2:2000 Fibre optic communication subsystem basic test procedures. Fibre optic cable plant. Single-mode fibre optic cable plant attenuation
EN 61281-1:1999 Fibre optic communication subsystems. Generic specification
EN 61284:1998 Overhead lines. Requirements and tests for fittings
EN 61285:2004 Industrial-process control. Safety of analyser houses
EN 61286:2002 Information technology. Coded graphic character set for use in the preparation of documents used in electrotechnology and for information interchange
EN 61290-10-1:2003 Optical fibre amplifiers. Basic specification. Multichannel parameters. Pulse method using an optical switch and optical spectrum analyzer
EN 61290-10-2:2003 Optical fibre amplifiers. Basic specification. Multichannel parameters. Pulse method using a gated optical spectrum analyzer
EN 61290-10-3:2003 Optical fibre amplifiers. Basic specification. Multichannel parameters. Probe methods
EN 61290-1-1:1998 Optical spectrum analyzer
EN 61290-11-1:2003 Optical fibre amplifiers. Basic specification. Polarization mode dispersion. Jones matrix eigenanalysis method (JME)
EN 61290-1-2:1998 Optical fibre amplifiers. Basic specification. Test methods for gain parameters. Electrical spectrum analyzer
EN 61290-1-3:1998 Optical fibre amplifiers.Basic spectrum analyzers. Optical power meter
EN 61290-2-1:1998 Optical fibre amplifiers. Basic specification. Test methods for optical power parameters. Optical spectrum analyzer
EN 61290-2-2:1998 Optical fibre amplifiers. Basic specification. Test methods for optical power parameters. Electrical spectrum analyzer
EN 61290-2-3:1998 Optical fibre amplifiers. Basic specification. Test methods for optical power parameters. Optical power meter
EN 61290-3:2000 Optical fibre amplifiers. Basic specification. Test methods for noise figure parameters
EN 61290-3-1:2003 Optical fibre amplifiers. Basic specification. Test methods for noise figure parameters. Optical spectrum analyzer method
EN 61290-3-2:2003 Optical fibre amplifiers. Basic specification. Test methods for noise figure parameters. Electrical spectrum analyzer method
EN 61290-5-1:2000 Optical fibre amplifiers. Basic specification. Test methods for reflectance parameters. Optical spectrum analyser
EN 61290-5-2:2004 Optical fibre amplifiers. Basic specification. Test methods for reflectance parameters. Electrical spectrum analyser method
EN 61290-5-3:2002 Optical fibre amplifiers. Basic specification. Test methods for reflectance parameters. Reflectance tolerance using an electrical spectrum analyser
EN 61290-6-1:1998 Optical fibre amplifiers. Basic specification. Test methods for pump leakage parameters. Optical demultiplexer
EN 61290-7-1:1998 Optical fibre amplifiers. Basic specification. Test methods for out-of-band insertion losses. Filtered optical power meter
EN 61291-1:1998 Optical fibre amplifiers. Generic specification
EN 61291-2:2001 Optical fibre amplifiers. Digital applications. Performance specification template
EN 61291-4:2003 Optical fibre amplifiers. Multichannel applications. Performance specification template
EN 61291-5-2:2002 Optical fibre amplifiers. Qualification specifications. Reliability qualification for optical fibre amplifiers
EN 61293:1995 Marking of electrical equipment with ratings related to electrical supply. Safety requirements
EN 61297:1996 Industrial-process control systems. Classification of adaptive controllers for the purpose of evaluation
EN 61298-1:1996 Process measurement and control devices. General methods and procedures for evaluating performance. General considerations
EN 61298-2:1996 Process measurement and control devices. General methods and procedures for evaluating performance. Tests under reference conditions
EN 61298-3:1998 Process measurement and control devices. General methods and procedures for evaluating performance. Tests for the effects of influence quantities
EN 61298-4:1996 Process measurement and control devices. General methods and procedures for evaluating performance. Evaluation report content
EN 613:2001 Independent gas-fired convection heaters
EN 61300-1:2003 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. General and guidance
EN 61300-2-1:2003 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Tests. Vibration (sinusoidal)
EN 61300-2-10:1997 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Crush resistance
EN 61300-2-11:1997 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Axial compression
EN 61300-2-12:1997 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Impact
EN 61300-2-13:1997 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Acceleration
EN 61300-2-14:1997 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Maximum input power
EN 61300-2-15:1997 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Torque strength of coupling mechanisms
EN 61300-2-16:1997 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Mould growth
EN 61300-2-17:2003 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Cold
EN 61300-2-18:1997 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Dry heat. High temperature endurance
EN 61300-2-19:1997 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Damp heat (steady state)
EN 61300-2-2:2003 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Mating durability
EN 61300-2-20:1997 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Climatic sequence
EN 61300-2-21:1997 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Composite temperature-humidity cyclic test
EN 61300-2-22:1997 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Change of temperature
EN 61300-2-23:1997 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Sealing for non-pressurized closures of fibre optic devices
EN 61300-2-24:2000 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Screen testing of ceramic alignment split sleeve by stress application
EN 61300-2-25:1997 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Sealing endurance for closures
EN 61300-2-26:1997 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Salt mist





To receive a price quote for any EN standard, please review our partners on the right


Return To The EN Standards Glossary Index






HOW TO OBTAIN STANDARDS 
To receive a direct quote for any EN standard, please review our partners below.

OTHER INFORMATION





Copyright StandardsDirect. European Standards.