EN 1217:1998 -
The StandardsDirect Glossary of European / EN Standards
THE EN STANDARDS GLOSSARY
en standards, European standards
Glossary of BC, ISO, and EN Standards

EN 1217:1998 Onwards

Standard No Title of Standard
EN 1217:1998 Materials and articles in contact with foodstuffs. Test methods for water absorption of ceramic articles
EN 12170:2002 Heating systems in buildings. Procedure for the preparation of documents for operation, maintenance and use. Heating systems requiring a trained operator
EN 12171:2002 Heating systems in buildings. Procedure for the preparation of documents for operation, maintenance and use. Heating systems not requiring a trained operator
EN 12173:1999 Chemicals used for treatment of water intended for human consumption. Sodium fluoride
EN 12174:2001 Chemicals used for treatment of water intended for human consumption. Sodium hexafluorosilicate
EN 12175:2001 Chemicals used for treatment of water intended for human consumption. Hexafluorosilicic acid
EN 12176:1998 Characterization of sludge. Determination of pH value
EN 12177:2000 Methods of test for petroleum and its products. Liquid petroleum products. Unleaded petroleum. Determination of benzene content by gas chromatography
EN 12178:2003 Refrigerating systems and heat pumps. Liquid level indicating devices. Requirements, testing and marking
EN 12179:2000 Curtain walling. Resistance to wind load. Test method
EN 12180:2000 Non-active surgical implants. Body contouring implants. Specific requirements for mammary implants
EN 12181:1998 Oropharyngeal airways
EN 1218-1:1999 Safety of woodworking machines. Tenoning machines. Single end tenoning machines with sliding table
EN 12182:1999 Technical aids for disabled persons. General requirements and test methods
EN 1218-2:2004 Safety of woodworking machines. Tenoning machines. Double end tenoning and/or profiling machines fed by chain or chains
EN 12183:1999 Manually propelled wheelchairs. Requirements and test methods
EN 1218-3:2001 Safety of woodworking machines. Tenoning machines. Hand fed tenoning machines with sliding table for cutting structural timbers
EN 12184:1999 Electrically powered wheelchairs, scooters and their chargers. Requirements and test methods
EN 1218-4:2004 Safety of woodworking machines. Tenoning machines. Edge banding machines fed by chain(s)
EN 1218-5:2004 Safety of woodworking machines. Tenoning machines. One side profiling machines with fixed table and feed rollers or fed by chain
EN 12186:2000 Gas supply systems. Gas pressure regulating stations for transmission and distribution. Functional requirements
EN 12188:1999 Products and systems for the protection and repair of concrete structures. Test methods. Determination of adhesion steel-to-steel for characterization of structural bonding agents
EN 12189:1999 Products and systems for the protection and repair of concrete structures. Test methods. Determination of open time
EN 12190:1999 Products and systems for the protection and repair of concrete structures. Test methods. Determination of compressive strength of repair mortar
EN 12192-1:2002 Products and systems for the protection and repair of concrete structures. Granulometry analysis. Test method for dry components of premixed mortar
EN 12192-2:1999 Products and systems for the protection and repair of concrete structures. Granulometry analysis. Test method for fillers for polymer bonding agents
EN 12193:1999 Light and lighting. Sports lighting
EN 12194:2000 Shutters, external and internal blinds. Misuse. Test methods
EN 12195-1:2003 Load restraint assemblies on road vehicles. Safety. Calculation of lashing forces
EN 12195-2:2001 Load restraint assemblies on road vehicles. Safety. Web lashing made from man-made fibres
EN 12195-3:2001 Load restraint assemblies on road vehicles. Safety. Lashing chains
EN 12196:2003 Gymnasium equipment. Horses and bucks. Functional and safety requirements, test methods
EN 12197:1997 Gymnastic equipment. Horizontal bars. Safety requirements and test methods
EN 12198-1:2000 Safety of machinery. Assessment and reduction of risks arising from radiation emitted by machinery. General principles
EN 12198-2:2002 Safety of machinery. Assessment and reduction of risks arising from radiation emitted by machinery. Radiation emission measurement procedure
EN 12198-3:2002 Safety of machinery. Assessment and reduction of risks arising from radiation emitted by machinery. Reduction of radiation by attenuation or screening
EN 12199:1998 Resilient floor coverings. Specifications for homogeneous and heterogeneous relief rubber floor coverings
EN 122001:1995 Specification for harmonized system of quality assessment for electronic components. Blank detail specification: radio frequency connectors (Type MIL-C-39012)
EN 12200-1:2000 Plastics rainwater piping systems for above ground external use. Unplasticized poly (vinyl chloride) (PVC-U). Specifications for pipes, fittings and the system
EN 122002:1995 Specification for harmonized system of quality assessment for electronic components. Blank detail specification: radio frequency coaxial connectors
EN 122003:1995 Specification for harmonized system of quality assessment for electronic components. Blank detail specification for the preparation of customer detail specifications (CDS) .
EN 12201-1:2003 Plastic piping systems for water supply. Polyethylene (PE). General
EN 12201-2:2003 Plastic piping systems for water supply. Polyethylene (PE). Pipes
EN 12201-3:2003 Plastic piping systems for water supply. Polyethylene (PE). Fittings
EN 12201-4:2001 Plastic piping systems for water supply. Polyethylene (PE). Valves
EN 12201-5:2003 Plastic piping systems for water supply. Polyethylene (PE). Fitness for purpose of the system
EN 12203:2003 Footwear, leather and imitation leather goods manufacturing machines. Shoe and leather presses. Safety requirements
EN 12205:2001 Transportable gas cylinders. Non-refillable metallic gas cylinders
EN 12206-1:2004 Paints and varnishes. Coating of aluminium and aluminium alloys for architectural purposes. Coatings prepared from coating powder
EN 12207:2000 Windows and doors. Air permeability. Classification
EN 12208:2000 Windows and doors. Watertightness. Classification
EN 12209:2003 Building hardware. Locks and latches. Mechanically operated locks, latches and locking plates. Requirements and test methods
EN 12210:2000 Windows and doors. Resistance to wind load. Classification
EN 12211:2000 Windows and doors. Resistance to wind load. Test method
EN 122110:1994 Harmonized system of quality assessment for electronic components. Sectional specification: radio frequency coaxial connectors. Series SMA
EN 122120:1996 Harmonized system of quality assessment for electronic components. Sectional specification: radio frequency coaxial connectors. Series BNC
EN 12213:1999 Cryogenic vessels. Methods for performance evaluation of thermal insulation
EN 122130:1994 Harmonized system of quality assessment for electronic components. Sectional specification: radio frequency coaxial connectors. Series SMB
EN 122140:1994 Harmonized system of quality assessment for electronic components. Sectional specification: radio frequency coaxial connectors. Series SMC
EN 12215:2004 Coating plants. Spray booths for application of organic liquid coating materials. Safety requirements
EN 122150:1996 Harmonized system of quality assessment for electronic components. Sectional specification: radio frequency coaxial connectors. Series EIA Flange
EN 12216:2002 Shutters, external blinds, internal blinds. Terminology, glossary and definitions
EN 122160:1996 Harmonized system of quality assessment for electronic components. Sectional specification: radio frequency coaxial connectors. Series SSMA
EN 12217:2003 Doors. Operating forces. Requirements and classification
EN 122170:1994 Harmonized system of quality assessment for electronic components. Sectional specification: radio frequency coaxial connectors. Series SSMB
EN 12218:1999 Rail systems for supporting medical equipment
EN 122180:1996 Harmonized system of quality assessment for electronic components. Sectional specification. Radio frequency coaxial connectors. Series SSMC
EN 12219:2000 Doors. Climatic influences. Requirements and classification
EN 122190:1996 Harmonized system of quality assessment for electronic components. Sectional specification: radio frequency coaxial connectors. Series 7-16
EN 12220:1998 Ventilation for buildings. Ductwork. Dimensions of circular flanges for general ventilation
EN 122200:1995 Harmonized system of quality assessment for electronic components. Sectional specification. Radio frequency coaxial connectors. Series TNC
EN 12221-1:2000 Changing units for domestic use. Safety requirements
EN 12221-2:2000 Changing units for domestic use. Test methods
EN 12222:1997 Footwear. Standard atmospheres for conditioning and testing of footwear and components for footwear
EN 12223:2000 Non-destructive testing. Ultrasonic examination. Specification for calibration block No.1
EN 12224:2000 Geotextiles and geotextile-related products. Determination of the resistance to weathering
EN 12225:2000 Geotextiles and geotextile-related products. Method for determining the microbiological resistance by a soil burial test
EN 12226:2000 Geotextiles and geotextile-related products. General tests for evaluation following durability testing
EN 12227-1:1999 Playpens for domestic use. Safety requirements
EN 12227-2:1999 Playpens for domestic use. Test methods
EN 12228:2002 Surfaces for sports areas. Determination of joint strength of synthetic surfaces
EN 12229:2000 Surfaces for sports areas. Procedure for the preparation of synthetic turf and textile pieces
EN 12230:2003 Surfaces for sports areas. Determination of tensile properties of synthetic sports surfaces
EN 12231:2003 Surfaces for sports areas. Method of test. Determination of ground cover of natural turf
EN 12232:2003 Surfaces for sports areas. Determination of thatch depth of natural turf
EN 12233:2003 Surfaces for sports areas. Determination of sward height of natural turf
EN 12234:2002 Surfaces for sports areas. Determination of ball roll behaviour
EN 122340:2002 Harmonized system of quality assessment for electronic components. Sectional specification. Radio frequency coaxial connectors. Series MMCX
EN 12235:2004 Surfaces for sports areas. Determination of vertical ball behaviour
EN 12236:2002 Ventilation for buildings. Ductwork hangers and supports. Requirements for strength
EN 12237:2003 Ventilation for buildings. Ductwork. Strength and leakage of circular sheet metal ducts
EN 12238:2001 Ventilation for buildings. Air terminal devices. Aerodynamic testing and rating for mixed flow application
EN 12239:2001 Ventilation for buildings. Air terminal devices. Aerodynamic testing and rating for displacement flow applications
EN 12240:1997 Touch and close fasteners. Determination of the overall and effective widths of tapes and the effective width of a closure
EN 12241:2000 Touch and close fasteners. Method for closure prior to washing and drying or dry cleaning
EN 12242:2000 Touch and close fasteners. Determination of peel strength
EN 12243:2000 Touch and close fasteners. Determination of dimensional change in washing and drying and dry cleaning
EN 12244-1:1998 Direct gas-fired washing machines, of nominal heat input not exceeding 20 kW. Safety
EN 12244-2:1998 Direct gas-fired washing machines, of nominal heat input not exceeding 20 kW. Rational use of energy
EN 12245:2002 Transportable gas cylinders. Fully wrapped composite cylinders
EN 12246:1999 Quality classification of timber used in pallets and packaging
EN 12248:1999 Sawn timber used in industrial packaging. Permitted deviations and preferential sizes
EN 12249:1999 Sawn timber used in pallets. Permitted deviations and guidelines for dimensions
EN 1225:1996 Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the creep factor under wet conditions and calculation of the long-term specific ring stiffness
EN 12251:2004 Health informatics. Secure user identification for health care. Management and security of authentication by passwords
EN 12252:2000 Equipping of liquefied petroleum gas (LPG) road tankers
EN 12253:2004 Road transport and traffic telematics. Dedicated short-range communication. Physical layer using microwave at 5.8 GHz
EN 12254:1999 Screens for laser working places. Safety requirements and testing
EN 12255-1:2002 Wastewater treatment plants. General construction principles
EN 12255-10:2001 Wastewater treatment plants. Saftey principles
EN 12255-11:2001 Wastewater treatment plants. General data required
EN 12255-12:2003 Wastewater treatment plants. Control and automation
EN 12255-13:2002 Wastewater treatment plants. Chemical treatment. Treatment of wastewater by precipitation/flocculation
EN 12255-14:2003 Wastewater treatment plants. Disinfection
EN 12255-15:2003 Wastewater treatment plants. Measurement of the oxygen transfer in clean water in aeration tanks of activated sludge plants





To receive a price quote for any EN standard, please review our partners on the right


Return To The EN Standards Glossary Index






HOW TO OBTAIN STANDARDS 
To receive a direct quote for any EN standard, please review our partners below.

OTHER INFORMATION





Copyright StandardsDirect. European Standards.